Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

节能减排 实现钢铁企业可持续发展

通过对钢铁行业消耗水资源及产生污染情况进行分析，阐述了目前钢铁行业为节能减排而采取的管理、技术、污染治理措施，以达到减少废水外排量、降低污染物浓度、降低新水消耗的目的，对钢铁行业废水回用中尚存和潜在的工艺、设计问题进行了讨论，同时提出了通过清洁生产、优化工艺结构来解决问题的措施和建议，确立了企业近期和长期的节能减排任务目标。     

The dyadic level of conceptualization and analysis: A missing link in multilevel OB research?

Despite burgeoning multilevel research in organizational behavior over the past two decades, our understanding of dyadic relationships at work remains underdeveloped. Focusing on leader–member exchange, we discuss conceptual and methodological challenges that have hampered research at this level and illustrate how and why such analysis might provide new insights. Copyright © 2015 John Wiley & Sons, Ltd.     

SRHSC梁主要设计参数损伤敏感度分析

以型钢高强混凝土(SRHSC)梁为研究对象,结合SRHSC梁受力机理及承载能力的试验研究成果,提出了极限状态下的承载能力是评价梁力学性能的关键指标,将损伤前后梁正截面抗弯承载力之比和斜截面抗剪承载力之比的均值作为自变量,给出了SRHSC梁损伤表征函数,并借助"预定损伤法",揭示了主要设计参数对SRHSC梁损伤演化的影响规律。研究成果将为建立地震激励下SRHSC框架结构楼层损伤模型提供理论和数据支持。     

L型钢管混凝土芯柱耐火极限研究

火灾高温对结构安全有显著影响,为研究等肢L形钢管混凝土芯柱的耐火极限及其影响因素,利用ABAQUS软件建立合理的高温反应分析模型,在验证模型可靠性基础上,分析了荷载比、截面边长、长细比、荷载偏心率、含钢率等对L形钢管混凝土芯柱耐火极限的影响。研究结果表明:在一定参数范围内,荷载比和截面边长是构件耐火极限的主要影响参数,荷载比越小,截面边长越大,构件的耐火极限越高;长细比和荷载偏心率对其影响较大,长细比和荷载偏心率越小,构件的耐火极限越高;含钢率对其影响不显著。结果可为异形钢管混凝土芯柱的抗火安全设计提供参考。     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.     

高能重离子辐照下国产RPV钢A508-3的硬化行为

目的 研究在563 K的温度条件下,高能重离子辐照导致国产RPV钢A508-3的硬化行为。方法 使用回旋加速器提供的352.8 MeV Fe²¹⁺对A508-3钢试样进行辐照,使其依次达到0.15、0.30、1.50 dpa的损伤水平。借助辐照终端的梯度减能装置,在样品表面至25 μm的深度范围内产生一个准均匀分布的原子离位损伤坪区,并使用纳米压痕仪和维氏显微硬度计测量了试样的硬度。结果 考虑到压痕尺寸效应的影响,采用Nix-Gao模型对硬度数据进行拟合,由于高能Fe离子产生了较厚的损伤区,辐照试样中的软基效应明显减弱。辐照后的试样出现明显的硬化现象,且随着辐照剂量的增大,硬化增量有饱和趋势。通过辐照前和辐照至0.15 dpa试样的微硬度数据,得出其与纳米硬度之间的线性关系(Hv0=0.85 H0)。结论 借助A508-3辐照前后的硬度数据,计算发现试样的屈服强度增量与辐照剂量之间存在一种幂函数关系,这为A508-3钢中子-离子辐照硬化的映射关系研究提供了基础数据。     

海洋大气环境下磷钒系耐候钢腐蚀数据分析

本文通过大气环境暴露试验,研究了在青岛海洋大气环境中暴露10年5周期的4种磷钒系耐候钢的腐蚀规律。结果表明,四种耐候钢的腐蚀速率的关系为:10CrPV10CuPV10MoPV08PV,耐侯钢的耐蚀性与添加元素类别和添加量相关。平均腐蚀深度数据拟合结果表明,A值大小顺序为:10CrPV10CuPV10 MoPV08PV,而n值的顺序是:10CuPV10CrPV10MoPV08PV。     

加强三峡地区土壤腐蚀环境调查与研究

三峡工程是关系到国计民生的一项特大型工程，必须保证其长期，安全地运行，这就要求对工程中的埋地金属构件进行有效的腐蚀防护，而构件使用寿命的预测及防护方法的筛选又赖于该地区土壤的腐蚀性强弱。本文以三峡坝址土壤的腐蚀性调查与研究为重点，探讨了三峡地区土壤的腐蚀性及其主要影响因子，作者认为，三峡地区土壤的腐蚀性较强，在工程建设中最好先进行土壤腐蚀环境的勘测，并在工程中采用必要的防护方法。     

新型钢渣水处理剂去除水体污染物的研究现状

钢渣是炼钢生产过程中产生的固体废弃物,具有较高的碱度、机械强度和比表面积。钢渣化学成份较复杂,直接排放会对环境造成严重的污染,加强钢渣的处置及综合利用具有重大意义。作为一种新型的水处理剂,钢渣用于去除水体污染物不仅减少了水体、土壤等生态环境的污染,而且达到了以废治废的目的。文章分析了钢渣水处理剂去除水体污染物的作用机理,认为钢渣水处理剂对水体中污染物的去除主要通过吸附和沉淀两种作用,而还原作用和离子交换作用相对较小。阐述了钢渣水处理剂处理重金属废水、有机废水和无机废水的研究现状,提出了在开发液态钢渣新型处理工艺的基础上,实现钢渣水处理剂的应用。