大连城市环境评价与城市发展定量研究

通过对大连城市环境系统的考察,设立了完整的评价指标体系,运用模糊优选理论建立模糊评价模型,对大连城市环境进行了定量研究,并结合经济和城市化情况进行了分析。研究结果表明:城市环境质量总体上是在逐年提高的,但从2002年以来发展较为平缓。经济和城市化情况有较大发展,但仍有不足之处。     

响应面法优化酸性玫瑰红B光催化氧化的影响参数

利用中心组合设计和响应面分析方法对影响UV/TiO2光催化降解酸性玫瑰红B的主要因素(初始pH值、K2S2O8浓度、TiO2浓度)进行分析.其中初始pH值、K2S2O8浓度和TiO2浓度的高、低水平分别为4-5.6,26-36mg·l-1和0.53-1.87mg·l-1,分析参数为脱色率的变化.通过使用Design-Expert 5软件可得到1个2次响应曲面模型,最佳的初始pH值、K2S2O8浓度和TiO2浓度分别为4.69,29.73mg·l-1和1.18 mg·l-1,脱色率达到最大(94.21%).     

中国地质调查局安全生产管理平台方案探讨

安全生产管理平台是中国地质调查局为应对日益严峻的地质调查安全生产形势,加强地质调查安全生产监管而开发的一套软件系统,涵盖了安全管理工作的大多数内容,并具有信息处理、数据记录、文档管理、统计查询等功能。文章从系统目标、系统设计、主要功能模块等几方面分析了安全生产管理平台设计方案。建议加快安全生产管理平台研发速度,提高我国地质调查安全生产管理水平。     

黄河上游玛曲生态系统服务价值的估算和生态环境管理的政策设计

黄河上游玛曲草地生态系统的保护对整个黄河流域的生态安全意义重大。本文参考Costanza等人提出的方法和谢高地等人的研究成果估算了玛曲的生态系统服务价值，结果为96.25亿元／年，远高于经济产品1.93亿元／年的现价。基于草地资源可持续利用和牧民生活水平不断改善的要求，提出了以改变超载过牧为目标、以生态补偿为核心内容的草地生态系统管理的政策设计，生态补偿的标准应不少于0.93亿元／年。生态环境管理的政策内容主要包括：产业开发和产业转型、生态移民和牧民定居、草场管理、技术推广以及控制人口过快增长和促进社会进步等。     

Influencing climate change regulations: examining responses from large-scale firms

Recent climate change projections and a push towards a universal agreement on carbon emission reductions suggest that firms will need to respond to future regulatory changes. This paper employs an influencing strategies lens to examine how large-scale firms might respond to future climate change regulations. The study uses a structured qualitative methodology to explore and explicate the strategic responses from 21 international firms to the proposed emissions trading scheme outlined in Australia's Garnaut Climate Change Review. The results of the analysis show that firms can use pre-emptive influencing strategies in attempts to shape and mould regulatory design parameters, secure high levels of transitional economic support, and shift the balance of public policies and expenditure. Complementary defensive strategies may also target policy makers and regulators with some of the potential negative consequences of the new regulations.     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。     

Toward an Alignment of Stormwater Flow and Urban Space

Urban stormwater practices are individually diverse, but they are components of an overall urban watershed system. This study proposes a conceptual model of that system, including its component spatial areas, their arrangement along the flow route, and their associations with urban land uses and values. The model defines three spatial areas along the flow route which have evolved over time into their present forms: (1) the source area, which is arranged and furnished primarily or entirely for human use, accommodation, and comfort; (2) the perimeter area, where specialized stormwater facilities carry away source‐area runoff or buffer downstream areas from its impacts; and (3) the downstream area, which receives the discharges from the perimeter or directly from the source area. Each area presents a specific combination of stormwater features and human interactions, and excludes others. Considering stormwater flows and functions in the context of physical urban spaces brings into view the spaces’ urban structures and interacting agendas. This model allows practitioners to navigate conceptually through the system, and to focus appropriate objectives and structures on each project site.     

Performance improvement of airfoils for wind blade with the groove

This study was a basic one to explore how much the aerodynamic characteristics of wind blade improve. The extent of improvement according to the shapes of groove placed on the surface of airfoil (NACA0015) was analyzed through computational analysis. A commercial computational fluid dynamics (CFD) code, the ANSYS Fluent 13, was used in this study. In this study, regarding with the positions and shapes of groove, the end of groove was placed at a certain distance (length, l) from both the front and back of separation starting point, the depth and the width were designated as h and d respectively. Analysis was conducted at the 7° angle of attack under the following conditions; the thickness (δ) of boundary layer to the depth (h) of groove ratio (h/δ) 0.6–1.0, the depth (h) of groove to the width (d) of groove ratio (h/d) 0.1–1.4, and the length (l) between the end of groove and separation point to the thickness (δ) of boundary layer ratio (l/δ) ?0.5–0.5. Among these conditions, the best improvement of lift to drag ratio, standing at 15.3%, was under h/δ = 1.0, h/d = 0.12, and l/δ = –0.5 (7° AOA, Re = 360k). In addition, throughout the range of angle of attack, 2–14°, lift to drag ratio improved by 0.8%, 5.1%, 3.2%, and 1.8% each when Reynolds numbers were 280k, 360k, 450k, and 530k. It is also confirmed that the shape of groove contributed to recovering velocity around airfoil wall and the lift to drag ratio improvements by groove were maintained at the given range of Reynolds number and around the angle of attack, 7°.     

The influence of the level of definition of functional specifications on the environmental performances of a complex system. EcoCSP approach

The tendency towards a homogenous mode of development modelled on that of Western countries means that sustainable development has become increasingly urgent. It is necessary to thoroughly redefine products and their expected performances in such a way that the consequences are compatible with sustainable development. In the domain of product design, this means that it is no longer sufficient to use assessment tools “after the fact” to check the impact of products whose functional unit (FU) was defined prior to production; it is now necessary to rethink the definition of the FU itself. This article aims to present an approach based on a combination of life cycle analysis methods and problem-solving by constraint satisfaction. This original approach makes it possible to vary the design of the different dimensions of the FUs of a complex system and thus to make it easier to identify the best architecture along with the best functional definition of the system. In this study, the EcoCSP approach is applied to define the functional performances of an ecological passenger ferry. The complexity of couplings between subsystems and the sheer number of those subsystems mean that the designer has to use “intelligent” tools. These simulate a great number of scenarios and help him/her to fine-tune the system and make the right technological choices with regard to the right functional specifications.     

长江中游城市群经济与生态成本空间演化模式分析

综合运用变异系数、泰尔指数及ESDA-GIS多种方法,在充分考虑传统经济影响因子的基础上,尝试引入经济发展生态成本指标,分析长江中游城市群经济综合发展水平与生态成本的空间匹配及演化模式。研究表明:经济综合发展水平高低聚集特征明显,空间极化现象是导致区域经济发展不平衡的主要原因;生态成本空间集聚现象以高高集聚和低低集聚为主,且呈现出高高集聚减少、低低集聚增多的现象,生态成本消耗有所改善;2001~2012年长江中游城市群市域经济综合发展水平与生态成本表现出越来越显著的差异化空间格局,呈现出由低经济综合发展水平-低生态成本过渡到高经济综合发展水平-高生态成本,进而发展到高经济综合发展水平-低生态成本的空间匹配模式的阶段性特征;高经济综合发展水平-高生态成本的经济发展模式仍在大部分城市中存在,经济与生态空间协调发展的潜力仍然很大。