铁矿石对脱除烧结废气中NOx的催化效应

向混合料中加添加剂能够在烧结过程中脱除烧结废气中的NO。实验研究了铁矿石对NO脱除反应的催化效应。在900℃下,分别以5种不同铁矿石作为填料层,用2种标准气体和压缩空气配制的混合气体模拟烧结废气。试验结果表明,铁矿石种类对铁矿石的催化能力有重要影响。D型铁矿的催化能力最强而且不会发生弱化,NO转化率接近100%;其它几种铁矿石的催化能力较差,随着反应时间的延长有明显的弱化现象,但很快即基本趋于稳定状态,NO转化率达到了60%~70%。     

好氧颗粒污泥膜生物反应器的运行特性

以人工合成模拟废水对好氧颗粒污泥膜生物反应器(MBR)的运行特性和膜污染进行了研究.结果表明:在HRT为6h,溶氧浓度为4～6mg.L^-1,COD的容积负荷为7.24kg·(m³·d)^-1的条件下,COD的去除率可达96%以上.当NH₃-N的容积负荷为0.17kg·(m³·d)^-1时,NH₃-N的去除率可达60%.COD/N比的变化,对好氧颗粒污泥MBR的COD及NH₃-N去除率基本没有影响.稳定运行过程时,MBR中好氧颗粒污泥浓度(MLSS)基本维持在14～16mg·L^-1.较高的污泥浓度和颗粒污泥内部缺氧和厌氧环境的存在,使MBR中硝化和反硝化过程能同时存在.同时,比较了2种不同形态的活性污泥(颗粒污泥和絮状污泥)在MBR运行过程中膜通量的变化趋势,结果表明,颗粒污泥MBR膜通量的下降速度明显比絮状污泥MBR的下降速度慢很多,且通过空气反冲或用水清洗即可使通量基本恢复.     

铁路车站X射线行李包检查系统放射防护情况调查

为调查铁路车站X射线行李包检查系统放射防护水平,2017年至2019年对6个铁路车站3种型号检测系统的行李包入口和出口,系统上盖板、左侧、右侧5个位置的空气比释动能率进行620台次检测.结果显示,620台次检测的空气比释动能率检查结果均合格,不同型号、不同检测位置空气比释动能率有统计学差异,其中C型5个检测位置的空气比...     

水蒸气电晕放电下的烟气脱硫效果

采用多针-板式电极,在70 m³/h烟气流量范围内,研究了水蒸气浓度、烟气流量、电场强度等因素对不饱和水蒸气正直流电晕放电烟气脱硫率的影响以及水蒸气电晕放电对脉冲放电烟气脱硫率的提高.研究结果表明,实验范围内,按照NH₃∶SO₂摩尔比为2∶1添加NH3的条件下,增加水蒸气流量、增强电场强度、减少烟气流量,烟气脱硫率能提高10%,达到60%左右.同时,水蒸气电晕放电能使脉冲放电的烟气脱硫率提高5%左右,达到90%以上.     

磷对云龙湖富营养化优势藻及混合藻生长的影响

氮磷等营养盐的增加和藻类的过度增殖是富营养化的主要标志。大多数湖泊水体富营养化受磷元素的制约。研究表明富营养化水体的不同藻类对磷含量的依赖性各不相同。通过研究在相同氮浓度,相同温度条件下,不同磷浓度对纯种小球藻和硅藻以及天然混合藻生长速度的影响,发现在氮浓度充足的情况下,磷含量高促进小球藻生长;对硅藻却没有明显的相关性;天然水体混合藻生长速度与磷浓度呈正相关。     

高效喷淋泡沫脱硫技术及装置的应用

SO2是产生酸雨的主要气体,其主要来源于工业燃煤锅炉.以沈阳一家电厂为例,该厂选用新型高效的喷淋泡沫脱硫除尘器对锅炉排放的SO2进行治理.进入喷淋泡沫塔前的SO2平均浓度为2780 mg/m3,经脱硫后出塔平均浓度为289.3 mg/m3,去除率为89.6%.结果表明,这种有别于传统湿法的新型高效的喷淋泡沫脱硫技术及装置具有脱硫效率高、装置占地少、运行稳定、沉淀物易于回收利用等特点,对锅炉排放的SO2进行治理是非常有效的.     

Enhancing treatment efficiency of swine wastewater by effluent recirculation in vertical-flow constructed wetland

Introduction Livestock w astew ater contains highly concen- trated pollutants, including suspended solids (SS), organics, nutrients and bacteria. In C hina, w astew ater generated by concentrated farm s is com m only stored in anaerobic lagoons and partia…     

溶解氧和温度对地下水除铁、锰效果的影响

研究锰砂滤层去除铁、锰过程中温度、溶解氧两个因素对去除效果的影响,为生物法除铁、锰的实际运行提供了参考依据。从经济性和微生物角度考虑,原水DO维持在3mg／L左右即可满足运行要求,采用跌水曝气的方式去除效果优于管道混合器。当铁锰共存时最适宜的处理环境温度为20℃。     

Location selection of emergency supplies repositories for emergency logistics management: A variable weighted algorithm

With the development of the city, the number of establishments that are proposed or under construction is increasing year by year, and if they are industries that handle flammable, explosive, toxic, harmful, and dangerous substances, the public safety will face great threats, which will bring great challenges to emergency rescue work. Therefore, providing reasonable solutions to the problem of location selection of emergency supplies repositories are necessary for improving the emergency response efficiency in chemical industrial parks. A mathematical model for location selection of emergency supplies repositories in emergency logistics management are presented considering more actual factors. The optimization objectives of the model are to minimize total transport length and cost. And then a Variable Weighted Algorithm is designed to solve the model, where an auxiliary function was constructed with different methods of building weighting factors based on the theory and method of solving multi-objective optimization problems in operational research. Simulation results show the effectiveness and feasibility of the models and algorithms presented in this paper.     

Pool evaporation: Experimental tests at medium-scale with gasoline

Pool evaporation is a major source of flammable vapour clouds. Predicting the evaporation rate of a liquid hydrocarbon pool is therefore a key issue of dispersion modelling for safety concerns. This paper presents small- and medium-scale experiments of pool evaporation carried out with liquid hydrocarbons (pentane, heptane), hydrocarbon “gasoline-like” mixtures and gasoline. Liquid mass loss was measured and the evaporation rate deduced with its evolution in time. Other observations are highlighted, regarding the evolution of liquid temperatures, mixture compositions, and scale effects like the influence of pool length on surface evaporation rate. Comparisons with well-known correlations are then shown. The authors finally suggest a new semi-empirical correlation with a set of parameters fitted on the performed experiments.