近断层地震动考虑能量损伤效应的非弹性强度需求

由于靠近断层处地震地面运动中速度脉冲作用的存在,导致传统的基于瞬时加速度反应谱的抗震设计,不能有效考虑由此带来的巨大能量耗散和位移需求.笔者采用代表性的脉冲型实际近场地震记录和人工模拟三角函数地震动时程,在分析累积输入地震动耗能和结构位移间关系基础上,提出了等效速度比的表达式;给出了近场地震动的等效变形需求表达式;提出了等价延性系数的概念,来考虑由于地震动能量耗散对结构的强度需求;经非线性时程分析方法对其稳定性进行了验证比较,有利于增强结构的安全性.     

无上部抽吸装置储罐区人工龙卷风风场模拟

为了减少因储罐泄漏位置不确定造成的人员伤亡,指导应急疏散,提出利用人工龙卷风定向控制气体流动方向的模型。首先基于Fluent软件建立了储罐区域人工龙卷风数值模型,分析切向速度和压强沿径向变化规律,发现与经典Rankine涡模型切向速度沿径向分布规律一致,证实可在储罐区以射流相切的方式形成人工龙卷风风场。其次研究了涡流比和进风量对风场控制气流特性的影响,即分析形成的龙卷风风场最大切向速度、压强差变化规律,结果表明,涡流比越大,形成的龙卷风风场中切向速度和压强差越小,即气流向中心汇聚能力越弱;进风量越大,形成的龙卷风风场中切向速度和压强差越大,即气流向中心汇聚能力越强。研究表明,用人工龙卷风控制储罐泄漏气流方向是可行的。     

基于满意度的热风炉变论域模糊控制

针对热风炉具有参数时变、强干扰、非线性等特点,其最佳空燃比难以确定的问题,提出一种基于模糊满意度的变论域模糊控制方法.首先通过在线获得加热过程的状态参数,采用满意度函数对空燃比进行评价,并将该评价结果和炉温变化作为变论域模糊控制方法的输入来实时获取最优的空燃比值,从而保证热风炉炉温的温度控制.实际运行结果证实了该系统的有效性.     

外置式排风罩条缝口开口面积与气流均匀性研究

在外置式风罩罩口上设置条缝是用来提高和保证罩口气流均匀性的方法之一。在以往研究的基础上,对设置多大面积的条缝最有利于形成均匀的吸气气流进行了实验研究。实验通过改变条缝开口面积和总吸风量,测试该条件下风罩各条缝处风速,对比每组实验风速的均匀程度,从而反推使罩口实现均匀气流的条缝开口面积和风量条件。实验结果表明,条缝开口面积总和等于1倍罩内吸风口面积能够使风罩形成较好的均匀气流,从能量消耗的角度看也较为节能。风量的变化对这一结论并无影响。     

浙江省火电厂脱硫旁路开启现状及取消对策

介绍了浙江省火电厂应对旁路铅封采取的措施,比对了铅封前后旁路开启的情况和造成的影响,对造成旁路开启的原因进行了分析,提出了实施取消旁路应关注的要点。     

Is The Ca + K + Mg/Al Ratio in the Soil Solution a Predictive Tool for Estimating Forest Damage?

The ratio between (Ca +K +Mg) and Al in nutrientsolution has been suggested as a predictive tool forestimating tree growth disturbance. However, the ratiois unspecific in the sense that it is based on severalelements which are all essential for plant growth;each of these may be growth-limiting. Furthermore,aluminium retards growth at higher concentrations. Itis therefore difficult to give causal and objectivebiological explanations for possible growthdisturbances. The importance of the proportion ofbase-cations to N, at a fixed base-cation/Al ratio, isevaluated with regard to growth of Picea abies.The uptake of elements was found to be selective;nutrients were taken up while most Al remained insolution. Biomass partitioning to the roots increasedafter aluminium addition with low proportions of basecations to nitrogen. We conclude that the low growthrates depend on nutrient limitation in thesetreatments. Low growth rates in the high proportionexperiments may be explained by high internal Alconcentrations. The results strongly suggest thatgrowth rate is not correlated with the ratio in therooting medium and question the validity of usingratios as predictive tools for estimating forestdamage. We suggest that growth limitation of Picea abies in the field may depend on lowproportions of base cations to nitrate. It istherefore important to know the nutritional status ofthe plant material in relation to the growth potentialand environmental limitation to be able to predict andestimate forest damage.     

Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

磷石膏水热法合成硫酸钙晶须

以磷石膏为原料,二水合硫酸钙、硫酸镁、甘油为添加剂,采用水热法合成硫酸钙晶须,考察了料浆含量、反应温度、反应时间、体系pH等因素对晶须的直径和长径比的影响;并采用SEM技术观察硫酸钙晶须的形貌。实验结果表明,当磷石膏含量2.5%（w）、反应温度130 ℃、反应时间4 h、体系pH 4时,制备得到的硫酸钙晶须长径比为56.24,平均直径为0.17 μm。SEM表征结果显示,硫酸钙晶须形貌规整、分散均匀、直径较小,达百纳米级。     

LQZ型气力输送系统在电厂除灰中的应用

介绍了气力输送系统在电厂660MW机组除灰中的应用,并对飞灰特性,以及除灰系统设计、关键技术运用、运行情况、设备维护和故障处理等问题进行了分析论述。     

我院电子阅览室利用情况分析

分别按专业、系部、年级、性别等方面统计了学生的开户情况,在不同的时间段调查了学生上机的目的,然后对学生在电子阅览室的开户情况和上机行为进行了深入分析,在此基础上,对我院电子阅览室的管理提出了几点建议。