用事故树分析法进行炼厂油罐爆炸事故的环境风险评价

论述了风险、风险评价、环境风险评价的概念及其主要内容，说明利用事故树分析法进行工程环境风险评价的程序和方法。并运用这种方法对某炼厂油罐爆炸事故进行了大气环境风险评价。     

井下火花——矿井火灾的点燃源

考察了各类井下火花诱发灾害的典型实例以及８０年代以来国内外的研究状况，指出深入开展这一课题的研究对防灾的重要性．     

On the response of 500 gal propane tanks to a 25% engulfing fire

This paper presents detailed data on the thermal response of two 500 gal ASME code propane tanks that were 25% engulfed in a hydrocarbon fire. These tests were done as part of an overall test programme to study thermal protection systems for propane-filled railway tank-cars.

The fire was generated using an array of 25 liquid propane-fuelled burners. This provided a luminous fire that engulfed 25% of the tank surface on one side. The intent of these tests was to model a severe partially engulfing fire situation.

The paper presents data on the tank wall and lading temperatures and tank internal pressure. In the first test the wind reduced the fire heating and resulted in a late failure of the tank at 46 min. This tank failed catastrophically with a powerful boiling liquid expanding vapour explosion (BLEVE). In the other test, the fire heating was very severe and steady and this tank failed very quickly in 8 min as a finite rupture with massive two-phase jet release. The reasons for these different outcomes are discussed. The different failures provide a range of realistic outcomes for the subject tank and fire condition.     

有毒有害蒸气云扩散的危害估算

因事故排放形成的有毒有害蒸气云,有可能造成爆炸、火灾、中毒等危害后果,但危害后果的大小(危害程度),则与事故造成危害的时刻(延迟时间)有关。笔者在以往研究成果基础上,考虑该因素,并通过引入正态分布假设,时、空变换及误差分析,给出了估算危害程度(特别是延迟爆炸危害)的有效而简便方法,补充了以往危害估算方法(不考虑延迟时间)的不足,提高了危害后果估算精度,可广泛应用于生产安全评价、环境风险评价、风险工程设计、事故应急预案、事故应急救援等工作领域,对于保障环境安全具有显著的科学价值与现实意义。     

液化石油气罐区火灾爆炸危险性评价

液化石油气罐区属于重大危险源,一旦发生火灾爆炸事故,后果非常严重.评价其安全性,控制其危险,是重大事故预防的思想,也是国家安全生产法律、法规的强制要求.笔者根据安全工程学的相关原理,综合运用重大危险源评价法和灰色聚类法分别对罐区的固有危险性和现实危险性进行了评价,克服了重大危险性评价法未考虑环境因素这一缺陷,最后得出了其火灾爆炸危险性等级,为政府监管和企业对危险源的监控管理提供了可行的科学依据.     

储煤筒仓系统爆炸危险因素分析

结合火力发电厂输煤系统运行状况，分析了储煤筒仓系统的爆炸危险因素，并作出了具体的预防及应对措施，对相关企业的安全工作有较好的参考价值。     

Systems thinking in a gas explosion accident – lessons learned from Taiwan

On July 31, 2014, at around 23:57, several huge explosions occurred that lasted for 2 h in Kaohsiung City, Taiwan. As a result of a gas leak from a ruptured underground pipeline, the catastrophic incident destroyed more than 6 km of roads, killed 32 people, injured 321 people, and damaged 3259 buildings. Pipeline explosions have been reported as a repeatedly occurring problem, indicating that (1) complex systems are difficult to manage and control, and (2) humans are unable to effectively learn from experiences of accidents. Initial analyses results reveal that root causes of this incident were a combination of a series of complex chain reactions, which eventually led to propylene leakage and explosion. This is a systematic problem, which can hardly be investigated or analyzed by traditional research approaches. Based on the investigation reports and “systems thinking” method, this study develops causal loop diagrams for the Kaohsiung gas explosion to explore the root causes of the disaster. The research results indicate that (1) this pipeline explosion incident was the result of the chain reactions and was the output of a complex system; (2) the mental model of “production first” and “experience gap” were the root causes of the disaster; and (3) to achieve a higher safety standard, continuous education to improve the mental model of “safety first and safety over production” are essential. The findings of this study may contribute toward the improvement of the standard operating procedure for disaster management and preventing similar incidents in the future.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.