植物废料应用于白腐真菌处理难降解有机污染物

综述了植物废料在白腐真菌处理难降解有机污染物反应体系中的应用优势以及研究现状,指出目前国内外相关研究存在的问题主要集中在植物废料的选材、投量、染菌以及废渣最终处理等方面,因此解决以上方面中的瓶颈将是今后植物废料固定化白腐真菌处理难降解有机污染物的主要研究方向。     

造纸白泥烟气脱硫技术的工业应用

介绍了晨呜集团齐河板纸有限公司4×75t／h燃煤锅炉采用造纸白泥烟气脱硫工艺,着重阐述了SO2吸收系统工作原理和流程,测试了不同pH吸收液和过氧系数对脱硫效率的影响,分析了Na^＋浓度、Cl-、F-浓度对脱硫系统的影响,并与石灰石石膏对比做简单的技术经济比较,为相似装置的设计提供参考。     

Effects of arbuscular mycorrhizal fungi inoculation on arsenic accumulation by tobacco (Nicotiana tabacum L.)

A pot experiment was conducted to study the e ects of arbuscular mycorrhizal (AM) fungi (from contaminated or uncontaminated soils) on arsenic (As) uptake of tobacco (Nicotiana tabacum L.) in As-contaminated soil. Mycorrhizal colonization rate, dry weight, As and P uptake by plants, concentrations of water-extractable As and As fractions were determined. A low mycorrhizal colonization rate (< 25%) was detected. Our research indicated that AM fungi isolated from polluted soils were no more e ective than those from unpolluted soils when grown in symbiosis with tobacco. No significant di erences were observed in roots and stalks dry weights among all treatments. Leaves and total plant dry weights were much higher in Glomus versiforme treatment than that in control treatment. As contents in roots and stalks from mycorrhizal treatments were much lower than that from control treatment. Total plant As content exhibited the same trend. P concentrations in tobacco were not a ected by colonization, nor were stalks, leaves and total plant P contents. Roots P contents were remarkably lower in HN treatments than in other treatments. Meanwhile, decreased soil pH and lower water-extractable As concentrations and higher levels of As fraction bound to well-crystallized hydrous oxides of Fe and Al were found in mycorrhizal treatments than in controls. The protective e ect of mycorrhiza against plant As uptake may be associated with changes in As solubility mediated by changing soil pH. These results indicated that under As stress, proper mechanisms employed by AM fungi can protect tobacco against As uptake. Results confirmed that AM fungi can play an important role in food quality and safety.     

木质素磺酸盐基生物质固沙材料的部分生物效应

将制浆造纸废液中的木质素磺酸盐经过化学改性制备成生物质固沙材料BSSM-LS,可达到治理污染,有效利用资源和防风固沙、抑尘等多重效果,但在应用过程中,为避免对生态环境造成危害,必须关注其环境生物效应。文章首先选择具有代表性的小白菜和高羊茅草进行了种子萌发的试验,结果表明,BSSM-LS对植物生长无有害影响,反而由于补充了氮,对种子的萌发起到了良好促进作用。随后进行的BSSM-LS与白腐菌及其酶相互作用的研究表明,BSSM-LS对裂褶菌Schizophyllum commune无有害影响,对漆酶无抑制作用。在自然条件下,BSSM-LS生物降解仍需要较长时间,接种白腐菌后可加速其降解过程;在漆酶作用下BSSM-LS可发生一定程度降解,表现为分子量减少,磺酸基含量下降,共轭羰基和醌型结构增加,有利于BSSM-LS的腐殖化进程。     

Investigation of factors on a fungal biofilter to treat waste gas with ethyl mercaptan

IntroductionOff gasescontainingVOCandodorsmaydogreatharmtoenvironmentandpeople’shealth .Therearemanymethodsfortreatingthem ,suchasphysicalmethods ,chemicalmethodsandbiologicalmethods.Biologicalmethodsarewidelyappliedintheprocessofoff gasespurificationfor…     

白腐菌对制浆黑液中硫酸盐木素的降解

研究了白腐菌对硫酸盐木素的降解作用和影响因素,结果发现,２种白腐菌对硫酸盐木素的降解能力不同,培养１０ｄ后,木云芝Ｌｕ－１１的降解率达到７４．５％,而黄孢原毛平革菌的降解率为６５．６％,分子量在１５００￣３０００ｋｄ之间的硫酸盐木素部分被降解最为明显,木云芝的降解产物只有一种主要组分,而黄孢原毛平革菌的降解产物有２种主要组分,培养条件如碳源,氮源、ｐＨ值和温度对白腐菌降解硫酸盐木素的作用有明显的影     

白腐菌降解木素酶系及其作用机理

制浆行业目标是脱除木质素,留下纤维素.白腐菌对木素的选择降解性能是造纸工业兴起研究领域如生物制浆,生物漂白及污染处理的理论基础.本文对有关白腐菌降解木素的酶系及作用机制作了概述,目的在于绘出一幅整体的木素降解酶系相互依存的图景,以便人们扩大视野,全面深入研究木素降解过程.     

天水小陇山红豆杉(Taxus chinensis (Pilg.) Rehd)林土壤真菌多样性及其与生态因子的相关性

采用GPS系统采集了天水小陇山红豆杉林9块样地的土样,用稀释平板法对该区域真菌进行分离计数,进一步鉴定到属,并分析了真菌数量和类群与土壤养分、水分和pH等生态因子的相关性.结果表明,该区域土壤真菌数量和类群组成存在较大的空间变异,土壤真菌优势菌群的构成有相似性,青霉属、毛霉属为所有样地的优势菌群.真菌多样性分析表明,小陇山红豆杉物种多样性较丰富,不同样地多样性指数差异明显.土壤真菌总数、类群和多样性与土壤生态因子间的相关性分析表明,真菌总数与土壤pH呈显著负相关(R-0.796),与水分和有机质呈显著正相关;Shannon-Wiener指数与土壤有机质呈显著正相关;各属与土壤生态因子呈现不同的相关性.      

白腐菌J-6对五类化学结构染料的脱色性能

从白腐菌中筛出了一株能对五类不同化学结构的染料进行高效脱色的菌株——J-6。通过采用“批式”摇床培养法,测定染料脱色率,从而确定该菌株能高效脱色的最佳培养时间和连续处理染料的能力。发酵培养96h的菌体可使活性艳蓝R(A)SP在5h内脱色率达95％以上;活性翠蓝G、活性黑GRP、混合染料在9h内脱色率达90％以上;孔雀绿、Po1yR-478在24h内脱色率分别达95％、90％以上。另外,J-6对不同染料最佳脱色时间和最终脱色效率与菌体本身发酵培养的时间长短和染料的种类紧密相关。J6处理能力强,连续处理4次染料后仍保持较高的脱色率。     

改进型气升式反应器中白腐菌降解碱木素

设计了一种白腐菌糙皮侧耳高效降解废水中碱木素的改进型气升式反应器,研究了内套管的开孔高度与脱色率的关系,并采用分批进料方式考察了改进后反应器中白腐菌对碱木素的降解效果。实验结果表明：反应器内套管的最佳开孔高度为45 cm;改进后反应器的漆酶酶活、COD去除率、脱色率分别最高达到了89.33 U/L、87.3%和81.39%,较改进前分别相对提高了17.5%、43.3%和39.6%。