Robust technology policy against emission leakage: The case of upstream subsidies

Asymmetric regulation of a global pollutant between countries can alter the competitiveness of industries and lead to emissions leakage, which hampers countries’ welfare. In order to limit leakage, governments consider supporting domestic trade-exposed firms by subsidizing their investments in abatement technology. The suppliers of such technologies tend to be less than perfectly competitive, particularly when both emissions regulations and advanced technologies are new. In this context of twin market failures, we consider the relative effects and desirability of subsidies for abatement technology. We find a more robust recommendation for upstream subsidies than for downstream subsidies. Downstream subsidies tend to increase global abatement technology prices, reduce pollution abatement abroad and increase emission leakage. On the contrary, upstream subsidies reduce abatement technology prices, and hence also emissions leakage.     

The effect of an active steering system on city bus drivers’ muscle activity

City bus drivers spend hours driving under time pressure, in congested traffic and in a monotonous sitting position. This leads to unhealthy working conditions, especially in terms of physical and psychological stress. The aim of this study is to investigate whether an active steering system can alleviate the musculoskeletal stress involved in manoeuvring a bus. Twenty bus drivers drove a city bus equipped with the Volvo dynamic steering (VDS) support system in real traffic. Steering effort was evaluated with electromyography and with a questionnaire. Compared to baseline, VDS significantly reduced the required muscle activity by on average 15–25% while turning, and up to 68% in the part of the manoeuvre requiring maximum effort. The bus drivers believed that VDS will help reduce neck and shoulder problems, and they expressed a desire to have VDS installed in their own bus.     

Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.     

Threats to intact tropical peatlands and opportunities for their conservation

Large, intact areas of tropical peatland are highly threatened at a global scale by the expansion of commercial agriculture and other forms of economic development. Conserving peatlands on a landscape scale, with their hydrology intact, is of international conservation importance to preserve their distinctive biodiversity and ecosystem services and maintain their resilience to future environmental change. We explored threats to and opportunities for conserving remaining intact tropical peatlands; thus, we excluded peatlands of Indonesia and Malaysia, where extensive deforestation, drainage, and conversion to plantations means conservation in this region can protect only small fragments of the original ecosystem. We focused on a case study, the Pastaza‐Marañón Foreland Basin (PMFB) in Peru, which is among the largest known intact tropical peatland landscapes in the world and is representative of peatland vulnerability. Maintenance of the hydrological conditions critical for carbon storage and ecosystem function of peatlands is, in the PMFB, primarily threatened by expansion of commercial agriculture linked to new transport infrastructure that is facilitating access to remote areas. There remain opportunities in the PMFB and elsewhere to develop alternative, more sustainable land‐use practices. Although some of the peatlands in the PMFB fall within existing legally protected areas, this protection does not include the most carbon‐dense (domed pole forest) areas. New carbon‐based conservation instruments (e.g., REDD+, Green Climate Fund), developing markets for sustainable peatland products, transferring land title to local communities, and expanding protected areas offer pathways to increased protection for intact tropical peatlands in Amazonia and elsewhere, such as those in New Guinea and Central Africa which remain, for the moment, broadly beyond the frontier of commercial development.     

The value of virtual conferencing for ecology and conservation

The objectives of conservation science and dissemination of its research create a paradox: Conservation is about preserving the environment, yet scientists spread this message at conferences with heavy carbon footprints. Ecology and conservation science depend on global knowledge exchange—getting the best science to the places it is most needed. However, conference attendance from developed countries typically outweighs that from developing countries that are biodiversity and conservation hotspots. If any branch of science should be trying to maximize participation while minimizing carbon emissions, it is conservation. Virtual conferencing is common in other disciplines, such as education and humanities, but it is surprisingly underused in ecology and conservation. Adopting virtual conferencing entails a number of challenges, including logistics and unified acceptance, which we argue can be overcome through planning and technology. We examined 4 conference models: a pure‐virtual model and 3 hybrid hub‐and‐node models, where hubs stream content to local nodes. These models collectively aim to mitigate the logistical and administrative challenges of global knowledge transfer. Embracing virtual conferencing addresses 2 essential prerequisites of modern conferences: lowering carbon emissions and increasing accessibility for remote, time‐ and resource‐poor researchers, particularly those from developing countries.     

锆-十六烷基三甲基氯化铵改性活性炭对水中硝酸盐和磷酸盐的吸附特性

采用锆(Zr)和阳离子表面活性剂十六烷基三甲基氯化铵(CTAC)对活性炭进行联合改性,考察了所制备的Zr-CTAC改性活性炭对水中硝酸盐和磷酸盐的吸附去除作用,并探讨了相关的吸附去除机制.结果表明,Zr-CTAC改性活性炭对水中硝酸盐和磷酸盐均具备较好的吸附去除能力.Zr-CTAC改性活性炭对硝酸盐和磷酸盐吸附动力学过程满足准二级动力学模型.Langmuir、Freundlich和Dubinin-Radushkevich(D-R)等温吸附模型可以较好地描述Zr-CTAC改性活性炭对水中硝酸盐的等温吸附过程,Langmuir和D-R等温吸附模型可以较好地描述Zr-CTAC改性活性炭对水中磷酸盐等温吸附过程,通过Langmuir模型计算得到吸附剂对硝酸盐和磷酸盐的最大单位吸附量分别为7.58 mg·g-1和10.9 mg·g-1.高的p H会抑制Zr-CTAC改性活性炭对水中硝酸盐和磷酸盐的吸附.水中共存的Cl-、HCO-3和SO2-4等阴离子均会抑制Zr-CTAC改性活性炭对硝酸盐和磷酸盐的吸附,且对吸附硝酸盐的抑制作用较强而对吸附磷酸盐的抑制作用较弱.水中共存的磷酸盐对Zr-CTAC改性活性炭吸附硝酸盐的抑制作用较强,而水中共存的硝酸盐对Zr-CTAC改性活性炭吸附磷酸盐的抑制作用较弱.1 mol·L-1Na Cl溶液可以使90%左右被吸附到Zr-CTAC改性活性炭表面上的硝酸盐解吸下来.1 mol·L-1的Na OH溶液可以使78%左右被吸附到Zr-CTAC改性活性炭表面上的磷酸盐解吸下来.Zr-CTAC改性活性炭对硝酸盐的吸附机制主要包括阴离子交换作用和静电吸引作用,对磷酸盐的吸附机制主要包括配位体交换作用、阴离子交换作用和静电吸引作用.上述结果说明Zr-CTAC改性活性炭适合作为一种吸附剂去除废水中的硝酸盐和磷酸盐.     

SBR加载不同粒径磁性活性炭对其污泥颗粒化进程的影响机制

在相同序批式活性污泥反应器(SBR)中分别加载1.5 g·L~(-1)的80、140、200、和300目不同粒径的磁性活性炭(反应器编号依次为2、3、4、5号),同时以不投加磁性活性炭的SBR反应器(1号)作为对照组,研究各反应器污泥体积指数(SVI)、粒径分布特征、胞外聚合物(EPS)中胞外蛋白(PN)、胞外多糖(PS)的含量变化规律以及除污性能.结果表明,不同粒径磁性活性炭对污泥颗粒化进程有一定的影响,粒径过大、过小对促进污泥颗粒化进程的强化作用不明显,当磁性活性炭的粒径为140目和200目时,活性污泥很容易以其作为"成核"载体快速形成好氧颗粒污泥,并且形成的颗粒污泥结构紧密,沉降速率快.采用高斯函数分析污泥粒径分布和标准偏差发现,反应器运行的第50 d,3号和4号反应器内污泥平均粒径均达到了780μm以上,明显高于其他反应器,标准偏差分别为318.9μm和362.3μm,两反应器内形成的颗粒污泥粒径较均匀,处理系统较稳定.与此同时,投加不同粒径的磁性活性炭均有利于促进污泥胞外蛋白质PN含量的增加,对胞外多糖PS的含量影响不大;但合适的磁性活性炭粒径(140目和200目)越有利于污泥PN的分泌,颗粒化程度明显的3号和4号反应器的PN/PS比值均高于其他3个反应器.磁性炭基好氧颗粒污泥的形成符合"惰性内核模型".此外,3号、4号反应器对废水TN和TP的去除率分别达到50%和60%以上,均高于其他反应器.     

河流CO2与CH4排放研究进展

河流作为连接海-陆两大碳库的主要通道,其水-气界面二氧化碳(CO_2)与甲烷(CH_4)排放构成全球碳循环的重要环节,对全球气候变暖的贡献不容小觑.明确河流水体CO_2与CH_4产排过程、时空特征以及控制因素是认识河流生态学功能以及其对变化环境响应的重要内容.基于当前河流CO_2与CH_4排放研究进展,构建河流碳排放动力学概念框架(内源代谢、陆源输入),并从全球尺度、区域尺度、流域尺度综述了河流碳排放时空变异性特征以及存在的研究不足.在理解碳排放动力学概念框架和时空变异特征的基础上,构建了河流CO_2与CH_4动力学控制因子分层框架(内部因子:有机质、温度、营养盐;外部因子:水文、地貌、人类活动),深入探讨了河流碳排放的关键影响因素.最后,根据当前研究中存在的不足,提出河流碳排放应将纳入区域陆地碳平衡过程,今后研究重点应包括流域尺度上河流CO_2与CH_4内源产生与陆源输入相对贡献的量化研究、不同界面CO_2与CH_4产生与排放过程研究、高时空分辨率的监测数据的补充以及变化环境与人类活动干扰下河流碳排放的响应过程等,为理解河流生态学过程及生态系统功能提供基础,同时为我国进一步深入开展相关研究提供借鉴.     

南京北郊黑碳气溶胶的来源解析

利用七波段黑碳仪对2015年1~12月南京北郊地区黑碳(black carbon,BC)气溶胶实时监测,并结合黑碳仪模型对该期间内BC进行来源解析,探讨化石燃料排放产生BC(BCff)与生物质燃烧产生BC(BCbb)各自的贡献大小.结果表明,观测期间BC的吸收波长指数(α)和生物质燃烧对BC的贡献百分比(BB)的变化范围都较大但趋势较为一致;冬季α值偏高而夏季α值较低,表明不同季节时间BC来源和强度的差异性.BCff在各季节BC总浓度中占比略有不同但均高于75%;BC、BCff和BCbb的日变化趋势均呈双峰特征,在07:00~09:00和18:00~21:00左右浓度有最大值;全天中,BCff对BC贡献最大,浓度值约为BCbb的3~5倍;夜晚BC浓度普遍高于白天,其平均浓度值是白天的1.2倍.由浓度权重轨迹分析的结果可知,影响南京北郊地区高浓度BC的源区主要集中在浙江、安徽以及江西和福建等地区.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.