Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

Identification of Odor Causing Compounds in a Commercial Dairy Farm

The odorous air emissions from confined animal feeding operations (CAFOs), such as swine, poultry and dairy farms, are increasingly raising community complaints. Odorous emissions can result in health damages, psychological discomforts and adverse aesthetic effects in the community. However, these emissions are not well characterized up to now due to the lack of legislation, the limitations in sampling and instrumentation techniques, and the complexity of the emissions themselves. This study is aimed at the development of a high volume sampler and sorbent assembly to identify the odor causing compounds from a diary CAFO. The sorbent was custom designed to target the potential compounds that may exist in a dairy farm and was validated in laboratory with a synthetic odor from the swine manure. The actual samples at the diary farm were collected in spring and summer of 2005. The sorbents were solvent extracted and individual odor compounds were identified using GC–MS (gas chromatography–mass spectroscopy). The data obtained indicated that high volume sampling can shorten the sampling time from days to within 4 h. Both volatile organic compounds (VOCs) and volatile fatty acids (VFAs) have been identified from the dairy farm, such as phenol, methylphenol, 4-ethyl phenol, indole, methyl indole, benzyl alcohol, hexanoic acid, valeric acid and iso-valeric acid, together with some nitrogen containing compounds that have not been reported before.     

B—P网络逐步聚类法在环境测点优选中的应用

将Ｂ－Ｐ网络原理与逐步聚类分析思想相结合,用于环境测点聚类优选。该方法用于水清河几个监测断面的优选结果是符合客观实际的。     

可持续发展的生态学思考

本文从生态学角度对可持续发展理论进行了思考。指出生态危机是可持续发展产生的基本背景;生态学中许多基本理论,如协调、适应、稳定、有序、循环再生及生态系统理论等,是可持续发展不断完善的理论基础;包括生态规划、生态技术与生态管理在内的广义生态工程,是实现可持续发展的有效途径     

不同热力背景对城市降雨（暴雨）的影响（Ⅰ）—降雨分布的空间差异

如何准确描述和预测降雨（暴雨）的空间分布,已成为城市减灾防灾的重要内容,本文探讨了利用热信息研究城市降雨空间分布差异的方法。在遥感、GIS技术支持下,利用对没的期夏、冬季热图像的主成分析和图像分割,将上海市1958－1998年热环境划分为自然、低温、高温3种不同的热力背景。在此基础上,就不同热力背景对城市降雨（暴雨）分布空间差异的影响规律进行了研究,为建立城市降雨空间差异预报模型奠定了基础。     

一个新的拓扑指数用于芳烃化合物溶解度、分配系数及生物毒性的研究

在分子拓扑理论的基础上,提出了一个新的拓扑指数Yx,并用Yx研究了芳烃化合物的溶解度、分配系数及生物毒(活）性,给出了相关方程。结果表明,新方法计算方便,物理意义明确,预测值与相应的实验值较吻合。     

海洋巨藻(Durvilaea potatorum)生物吸附剂对Hg~(2 )的吸附动力学研究

对经特殊的稳定化预处理所得的海洋巨藻 (Durvillaeapotatorum)生物吸附剂对Hg2 的吸附动力学进行了研究 ,报导了不同Hg2 初始浓度、温度以及生物吸附剂平均粒径下动态吸附量与时间的关系 .结果显示 ,各吸附动力学曲线呈优惠型 ;当生物吸附剂平均粒径为 0 .45mm时 ,Hg2 的半饱和时间tS均不超过 6 0min ;Hg2 初始浓度和生物吸附剂粒径越小 ,吸附温度越大 ,达到吸附平衡所需的时间越短 .在测试范围内 ,生物吸附剂的平衡吸附容量与粒径和温度无关 .同时考察了吸附过程中的传质效应并对液膜传质系数kL进行了关联 ,结果表明 :当吸附时间t≤tS时 ,Hg2 的吸附速率为液膜传质控制 ;在测试范围内 ,kL为 0 .0 40 7～ 0 .112cm/s.本研究结果为利用海洋巨藻 (Durvillaeapotatorum)生物吸附剂处理含汞废水的规模化应用提供了一定的依据 .图 5表 2参 11     

2,2’,4,4’-和3,3’,4,4’-四氯联苯(TCB)对小白鼠体外受精的影响(英文)

采用体外受精技术评价环境污染物 2 ,2’ ,4,4’ 和 3,3’ ,4,4’ 四氯联苯对小白鼠卵母细胞受精能力和 2 细胞胚胎发育的毒性作用 .实验结果表明 :ρ(PCB) =0 .1,1.0 ,10 .0mg/mL的 2 ,2’ ,4,4’ 和 3,3’ ,4,4’ 四氯联苯均显著降低小白鼠卵母细胞的受精能力 ;ρ(PCB) =1.0 ,10 .0mg/mL的 2 ,2’ ,4,4’ 和 3,3’ ,4,4’ 四氯联苯使卵母细胞的退化率和 2 细胞的畸形率显著增加 ;两种四氯联苯对小白鼠卵母细胞体外受精能力、退化率和 2 细胞胚胎的畸形率无统计差异 .表 2参 2 5     

底泥中多环芳烃(PAHs)提取方法评析

总结了底泥中多环芳烃(PAHs)提取的处理流程和国内外多种提取方法,比较了几种在我国较为常用的提取方法的效率.同时还提出了PAHs分离纯化的方法和步骤,并指出了提取过程中影响实验回收率的几个因素.     

区域红壤资源信息系统的建立

将GIS技术与数学模型相结合,探讨区域红壤资源信息系统的建立与应用.在明确红壤资源信息系统研制的目的、任务与基本原则的基础上,进行系统的总体设计.划分系统的模块和确定系统的各个组成部分,并确定系统的软硬件配置、设计系统界面.建立空间数据库及多种分析与应用模型.