小尺度农田土壤Pb、Zn和Cd空间分布及污染评价——以云南沘比江沿岸某农田为例

以沘江沿岸面积为96 000 m2的整片农田作为研究对象,采集144个表层土壤样本,利用ICP-MS测定土壤中Pb、Zn和Cd的含量,使用地统计学方法分析Pb、Zn和Cd的空间分布,采用污染负荷指数评价土壤Pb、Zn和Cd污染程度,并对污染来源进行解析。结果表明研究区域农田土壤中Pb、Zn和Cd含量均超过当地土壤背景值,出现了污染富积。根据国家土壤环境质量标准,Pb未超标,Zn超标率为98.6%,Cd超标率为100%。普通克里金空间插值分布图显示,Pb、Zn和Cd高含量区域均沿着省道227和靠近居民区分布,而临近沘江的区域Pb、Zn和Cd含量相对较低,其中Pb、Zn含量变化基本呈现由省道227向沘江方向递减规律。Pb、Zn和Cd之间具有较好的相关性,三者同源概率较大。对Pb、Zn和Cd的污染评价表明,研究区域农田土壤57.78%为中度污染,42.22%为重度污染。从污染负荷指数法（PLI）空间插值图可见,重度污染区域位于省道227沿线与居民区东侧区域,其余区域为中度污染。本研究结果说明,小尺度空间分析方法用于农田土壤污染状况的分析,能有效预测重金属空间分布情况,在土地紧缺的情况下,该方法能有效指导对农田的不同区域进行选择使用和精准管理。     

EuroBionet: a pan-European biomonitoring network for urban air quality assessment

EuroBionet, the 'European Network for the Assessment of Air Quality by the Use of Bioindicator Plants', is an EU-funded cooperative project currently consisting of public authorities and scientific institutes from 12 cities in 8 countries. In 2000, the bioindicator plants tobacco (Nicotiana tabacum Bel W3), poplar (Populus nigra 'Brandaris'), spiderwort (Tradescantia sp. clone 4430), Italian rye grass (Lolium multiflorum italicum) and curly kale (Brassica oleracea acephala) were exposed to ambient air at 90 monitoring sites according to standardised methods. Visible injuries and growth parameters were assessed and the accumulation of toxic substances in leaves determined. The exposure of tobacco resulted in a gradient with low levels of ozone-induced foliar injury in N and NW Europe, and medium to high values in the southern and central regions. The results of heavy metal and sulphur analyses in rye grass samples generally showed low to very low sulphur and low to medium heavy metal concentrations in leaves. In some cities, however, local hot spots of heavy metal contamination were detected. Analyses of the PAH contents in curly kale leaves gave low to medium values, with locally elevated levels at traffic-exposed sites.     

Performance assessment of NAPL remediation in heterogeneous alluvium

Over the last few years, more than 40 partitioning interwell tracer tests (PITTs) have been conducted at many different sites to measure nonaqueous phase liquid (NAPL) saturations in the subsurface. While the main goal of these PITTs was to estimate the NAPL volume in the subsurface, some were specifically conducted to assess the performance of remedial actions involving NAPL removal. In this paper, we present a quantitative approach to assess the performance of remedial actions to recover NAPL that can be used to assess any NAPL removal technology. It combines the use of PITTs (to estimate the NAPL volume in the swept pore volume between injection and extraction wells of a test area) with the use of several cores to determine the vertical NAPL distribution in the subsurface. We illustrate the effectiveness of such an approach by assessing the performance of a surfactant/foam flood conducted at Hill Air Force Base, UT, to remove a TCE-rich NAPL from alluvium with permeability contrasts as high as one order of magnitude. In addition, we compare the NAPL volumes determined by the PITTs with volumes estimated through geostatistical interpolation of aquifer sediment core data collected with a vertical frequency of 5-10 cm and a lateral borehole spacing of 0.15 m. We demonstrate the use of several innovations including the explicit estimation of not only the errors associated with NAPL volumes and saturations derived from PITTs but also the heterogeneity of the aquifer sediments based upon permeability estimates. Most importantly, we demonstrate the reliability of the     

Risk assessment method of polyethylene dust explosion based on explosion parameters

The explosion characteristic parameters of polyethylene dust were systematically investigated. The variations in the maximum explosion pressure (P_max), explosion index (K_st), minimum ignition energy (MIE), minimum ignition temperature (MIT), and minimum explosion concentration (MEC) of dust samples with different particle sizes were obtained. Using experimental data, a two-dimensional matrix analysis method was applied to classify the dust explosion severity based on P_max and K_st. Then, a three-dimensional matrix was used to categorize the dust explosion sensitivity based on three factors: MIE, MIT, and MEC. Finally, a two-dimensional matrix model of dust explosion risk assessment was established considering the severity and sensitivity. The model was used to evaluate the explosion risk of polyethylene dust samples with different particle sizes. It was found that the risk level of dust explosion increased with decreasing particle size, which was consistent with the actual results. The risk assessment method can provide a scientific basis for dust explosion prevention in the production of polyethylene.     

基于粗糙集-神经网络的矿山地质环境影响评价模型及应用

采用衡山白果地区石膏矿山的11个评价指标,综合运用粗糙集和神经网络理论,构建了基于粗糙集-神经网络(RS-ANN)的矿山地质环境影响评价模型,对RSES软件约简的数据和无约简的数据采用EasyNN-plus软件进行预测评价。神经网络模型的输入属性为8个,而粗糙集-神经网络模型的输入属性为6个,训练样本均为13个,预测样本均为4个,前者的平均预测精度为1.85%～24.86%,后者为1.23%～15.28%。研究发现,粗糙集在保留关键信息的前提下可有效地对数据表进行约简,约简后的神经网络预测结果与实际情况吻合,并比无约简时总体精度有较大幅度提高。     

基于灰色综合评价的通航安全角度下吴淞口建闸方案优选

将层次分析法与灰色关联分析法相结合,评价吴淞口挡潮闸3个备选方案对通航安全的影响。首先通过专家调查法,并对相关资料进行综合分析,确定吴淞口水闸建设工程方案通航安全影响评价指标,然后运用层次分析法计算各指标权重,最后利用灰色关联分析建立灰色评价模型,得到关联序,定量分析各方案在通航安全影响方面的优劣,得出最优方案,为吴淞口建闸方案的确定提供依据。     

环境影响评价中公众参与绩效考核指标体系构建与实证研究

本文构建了公众参与绩效考核指标体系,通过专家咨询法确定各指标权重,然后以湘潭垃圾焚烧发电厂环境影响评价中公众参与为例,运用模糊综合评判法进行实证研究。研究结论对提高环境影响评价中公众参与力度,考核公众参与的绩效水平提供科学依据。     

多层次灰色关联分析在绿色建筑设计方案优选中的应用

在新修订的《绿色建筑评价标准》(GB/T 50378—2014)的基础上,综合考虑了与绿色建筑设计方案评价相关的内容,构建出绿色建筑设计方案评价指标体系。在专家打分的基础上,通过层次分析法(AHP法)给各评价指标赋予了权重,运用多层次灰色关联分析模型分层次计算出各评价方案与理想方案的最终关联度并排序,进而确定最优方案,并通过引入实例验证了该评价方法的科学性和实用性。     

二次电池电极材料环境影响计算系统

以生命周期评价理论为基础,建立了电极材料电化学性能与环境影响的内在量化关联关系分析方法。基于Java语言,设计和编写了二次电池电极材料环境影响综合计算系统,协调考虑了二次电池的循环特性、电化学特征等,实现了环境影响评价过程中对材料质量需求的便捷计算,进而实现了整个评价操作过程的综合化、软件化和信息化,提高了评价效率。选用LiFePO_4/C,LiFe_(0.98)Ti_(0.02)PO_4/C,LiFe_(0.98)Mn_(0.02)PO_4/C和FeF_3(H_2O)_3/C 4种正极材料基于此系统进行了实例应用。     

含堆焊层临氢设备HTHA敏感性评价修正方法

加氢反应器等高温临氢设备由于长期在高温高压含氢或氢与硫化氢环境下服役,可能会出现高温氢腐蚀(HTHA)、氢脆等损伤现象,直接关系到装置的长期稳定可靠运行。为了防止出现氢损伤现象,多采用奥氏体不锈钢单层或多层堆焊技术。针对RBI技术中HTHA模块对于含堆焊层结构的临氢设备在评估时并未考虑堆焊层的影响,从氢扩散理论出发,考虑堆焊层的影响,提出采用有效氢分压的方法开展HTHA敏感性Pv因子的计算,并改进了E347+E309L双层堆焊层结构的临界Pv修正因子。