黄壤表面电场作用下Cu~(2+)与Zn~(2+)的吸附/解吸动力学研究

利用静态恒流法研究了黄壤表面电场作用下Cu2+与Zn2+的吸附/解吸动力学.结果发现:考虑黄壤表面电场作用下,Cu2+和Zn2+的吸附实验呈现初期强吸附作用下的零级动力学过程和一定时间之后弱吸附作用下的一级动力学过程,与理论预期一致;在Cu2+和Zn2+的解吸实验中,只有前期出现了弱吸附作用下的一级动力学过程,实验结果与理论预期存在差别,原因在于专性吸附的Cu2+、Zn2+很难被解吸下来;在交换/吸附实验中,Cu2+的吸附速率值和平衡吸附量均大于Zn2+,且Cu2+-K+体系的表面电化学参数φ0、σ0、E0均大于Zn2+-K+体系中的对应值,证明了黄壤颗粒表面对Cu2+的吸附作用强于Zn2+;在交换/解吸实验中,Zn2+的解吸速率值和平衡解吸量均大于Cu2+,Zn2+-K+体系的表面电化学参数φ0、σ0、E0均大于Cu2+-K+体系中的对应值,证明Zn2+-K+体系中Zn2+的解吸作用比Cu2+-K+体系中的Cu2+解吸作用强.     

污泥龄对低氧丝状菌活性污泥微膨胀系统的影响

为了研究污泥龄(SRT)对低氧丝状菌活性污泥微膨胀系统的影响,采用序批式间歇反应器(SBR)进行试验,分别按照厌氧/好氧和单级好氧的方式运行,考察了不同SRT下丝状菌污泥微膨胀系统的沉降性、脱氮除磷过程以及污泥特性的变化.结果表明,在好氧水力停留时间充分的条件下,低氧环境不但不会影响丝状菌微膨胀污泥的硝化进程,而且还有助于同步硝化反硝化(SND)、单级好氧除磷的发生.厌氧/好氧运行时,SRT与活性污泥的比硝化速率、比释磷速率和比吸磷速率成反比,与SND率和污泥的含磷量成正比.单级好氧运行时,减小SRT对硝化过程影响不大,但是有助于改善除磷效果.活性污泥的比耗氧速率(SOUR)、胞外聚合物(EPS)中多糖与蛋白质含量的比值、以及粘度都与SRT成反比.适当地减小SRT可以改善丝状菌微膨胀污泥的沉降性.厌氧/好氧运行时,厌氧段微氧环境易引发过度丝状菌污泥膨胀;单级好氧运行时,SRT过低会造成污泥黏性骤增而引发黏性污泥膨胀.     

耐冷高效亚硝酸盐型反硝化细菌的分离、筛选与鉴定

在10℃条件下,以亚硝酸钠为唯一氮源从长期淹水的冬水田中分离得到了12株亚硝酸盐型反硝化细菌.采用乙酸钠为唯一碳源,以高效去除亚硝酸盐氮和总氮且产生较低生物量氮为主要指标筛选出了一株反硝化能力最强的亚硝酸盐型反硝化细菌,命名为Y-12.研究发现,该菌在20℃条件下,对亚硝酸盐氮和总氮的去除率分别为99.87%和57.74%,产生了3.25 mg·L-1的生物量氮;在15℃条件下,对亚硝酸盐氮和总氮去除率分别为99.48%和51.53%,产生了3.00 mg·L-1的生物量氮.对其16S rRNA基因序列进行分析,发现该菌与恶臭假单胞菌(Pseudomonas putida)的同源性达到99%;对其特异性磷脂脂肪酸进行分析,发现与恶臭假单胞菌(Pseudomonas-putida-biotype A)的相似指数为0.469,初步鉴定为恶臭假单胞菌.     

表观遗传学机制与空气污染的健康效应

空气污染是一个全球性的问题,并且具有深远的环境影响。暴露于空气污染会对人体健康产生许多不同的影响,理解空气污染的健康效应又是一个复杂命题,既要考虑不同类型的污染物同时也要考虑相关疾病的复杂性。然而越来越多的研究表明,表观遗传学在空气污染相关疾病的发生、发展中发挥着重要的作用。空气污染物可引起DNA甲基化、组蛋白修饰和miRNA表达等表观遗传学改变,这种改变往往发生在疾病产生的早期,因此相关研究不仅可以了解疾病的发病机制,而且还为疾病早期诊断和预防筛选可能的标志物。本文综述了表观遗传学的几种修饰方式和空气污染物造成不良健康损伤机制的一些研究进展。     

人工湿地常用生物陶粒基质LDHs覆膜改性及其除磷效果研究

分别利用3种二价金属化合物和3种三价金属化合物,采用水热共沉淀法在碱性条件下对人工湿地中常用的生物陶粒基质进行层状双金属氢氧化物(LDHs)覆膜改性,并将9种不同类型的LDHs覆膜改性生物陶粒基质和普通生物陶粒基质分别填充于10个垂直流人工湿地模拟实验柱中,进行除磷净化实验.结果表明,9种不同类型的改性生物陶粒基质均能有效提高磷素的净化效果;Zn系LDHs改性生物陶粒对总磷、溶解性总磷、磷酸盐均有很好的处理效果,其中Zn Fe-LDHs、Zn Co-LDHs和Zn Al-LDHs对总磷的平均去除率均在92%以上,对溶解性总磷和磷酸盐的平均去除率均超过95%;其对磷素的净化机理主要集中于物理化学作用,同时还应与其对微生物生长的促进作用有关.     

炭化温度对废旧布袋制备活性炭性能的影响及其表征

以水泥厂废旧除尘布袋为原料,KOH为活化剂制备了活性炭.利用热重分析法(TG-DTG)对废旧布袋热解过程进行分析;重点考察了不同炭化温度(400、450、500、550和600℃)对废旧布袋制备活性炭的产率及活性炭的碘吸附值和亚甲基蓝吸附值的影响;同时采用N2吸附等温线对最佳工艺条件制备的活性炭孔隙结构进行了表征.研究结果表明,500℃为最佳炭化温度.最佳炭化温度下制备的活性炭,碘吸附值、亚甲基蓝吸附值和产率分别为1350.72 mg·g-1、97.5 mg·g-1和20.16%.活性炭比表面积高达1228.51 m2·g-1,总孔容达0.7134 cm3·g-1,孔径分布以微孔居多,N2吸附等温线为I型.     

石墨烯材料去除重金属及放射性核素的研究

石墨烯及其改性材料具有比表面积大、吸附能力强、抗辐射性能好、耐高温、耐酸碱等优点,近年来在去除重金属和放射性核素领域得到了广泛关注.本文简要介绍了石墨烯的合成及改性方法,综述了石墨烯材料去除水中重金属离子和放射性核素的研究进展,包括吸附容量、影响因素、吸附动力学、吸附热力学模型和吸附机理,分析了该研究领域目前存在的问题,探讨了今后的研究方向.     

Biological treatment of fish processing wastewater: A case study from Sfax City (Southeastern Tunisia)

The present work presents a study of the biological treatment of fish processing wastewater at salt concentration of 55 g/L. Wastewater was treated by both continuous stirred-tank reactor (CSTR) and membrane bioreactor (MBR) during 50 and 100 days, respectively. These biological processes involved salt-tolerant bacteria from natural hypersaline environments at different organic loading rates (OLRs). The phylogenetic analysis of the corresponding excised DGGE bands has demonstrated that the taxonomic affiliation of the most dominant species includes Halomonadaceae and Flavobacteriaceae families of the Proteobacteria (Gamma-proteobacteria class) and the Bacteroidetes phyla, respectively. The results of MBR were better than those of CSTR in the removal of total organic carbon with efficiencies from 97.9% to 98.6%. Nevertheless, salinity with increasing OLR aggravates fouling that requires more cleaning for a membrane in MBR while leads to deterioration of sludge settleability and effluent quality in CSTR.     

Changes in nitrogen budget and potential risk to the environment over 20 years (1990–2010) in the agroecosystems of the Haihe Basin,China

The nitrogen balance can serve as an indicator of the risk to the environment of nitrogen loss from agricultural land. To investigate the temporal and spatial changes in agricultural nitrogen application and its potential threat to the environment of the Haihe Basin in China, we used a database of county-level agricultural statistics to calculate agricultural nitrogen input, output, surplus intensity, and use efficiency. Chemical fertilizer nitrogen input increased by 51.7% from 1990 to 2000 and by 37.2% from 2000 to 2010, concomitant with increasing crop yields. Simultaneously, the nitrogen surplus intensity increased by 53.5% from 1990 to 2000 and by 16.5% from 2000 to 2010, presenting a continuously increased environmental risk. Nitrogen use efficiency decreased from 0.46 in 1990 to 0.42 in 2000 and remained constant at 0.42 in 2010, partly due to fertilizer composition and type improvement. This level indicates that more than half of nitrogen inputs are lost in agroecosystems. Our results suggest that although the improvement in fertilizer composition and types has partially offset the decrease in nitrogen use efficiency, the environmental risk has still increased gradually over the past 20 years, along with the increase in crop yields and nitrogen application. It is important to achieve a better nitrogen balance through more effective management to significantly reduce the environmental risk, decrease nitrogen surplus intensity, and increase nitrogen use efficiency without sacrificing crop yields.     

Mesoporous carbon adsorbents from melamine-formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), elemental(CHN) analysis, Fourier transform infrared(FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO_2 capture.The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO_2 adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO_2 adsorption capacity among the synthesized adsorbents. Breakthrough time and CO_2 equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO_2 system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.