自然通风排热量的近似计算法

采用“假设密闭绝热空间法”,计算工业厂房的自然通风排热量。实践证明,此方法是可行的。     

磁絮凝法处理DZA有机废水的研究

本文介绍了磁絮新颖产分离技术，应用该技术能有效处理水中ＤＺＡ有机物，实现数秒内的快速分离污泥，污泥含水率低。     

Evaluation of Saccharomyces cerevisiae strains as probiotic agent with aflatoxin B1 adsorption ability for use in poultry feedstuffs

In this study the aflatoxin B₁ (AFB₁) removal capacity, the tolerance to salivary and gastrointestinal conditions, autoaggregation and coaggregation with pathogenic bacteria of Saccharomyces cerevisiae strains isolated from broiler feces, were evaluated. Only four of twelve isolated strains were identified as Saccharomyces cerevisiae using molecular techniques. The results obtained in AFB₁ binding studies indicated that the amount of AFB₁ removed was both strain and mycotoxin-concentration dependent. Therefore, a theoretical model was applied in order to select the most efficient strain to remove AFB₁ in a wide range of mycotoxin concentration. The results indicated that S. cerevisiae 08 and S. cerevisiae 01 strains were the most efficient microorganisms in the mycotoxin removal. Viability on simulated salivary and gastrointestinal conditions was investigated and S. cerevisiae 08 strain showed the best results, achieving 98% of total survival whereas S. cerevisiae 01 reached only 75%. Autoaggregation and coaggregation assays showed S. cerevisiae 08 as the most appropriate strain, mainly because it was the unique strain able to coaggregate with the four bacterial pathogens assayed. Consequently, S. cerevisiae 08 is the best candidate for future in vivo studies useful to prevent aflatoxicosis. Further quantitative in vitro and in vivo studies are required to evaluate the real impact of yeast-binding activity on the bioavailability of AFB₁ in poultry. However, this study could be useful in selecting efficient strains in terms of AFB₁ binding and provide an important contribution to research into microorganisms with potential probiotic effects on the host.     

Innovative policy practices to advance building energy efficiency and retrofitting: Approaches,impacts and challenges in ten C40 cities

This study examines ten programmes to advance energy efficiency and retrofitting of existing, private sector buildings in C40 cities in Asia-Pacific and USA. We set out to identify differing policy approaches, together with potential impacts and implementation challenges for each. Findings unearthed six policy models – both mandatory and voluntary – with unique impacts and challenges. We demonstrate that innovation occurs without new policy inventions and largely by necessity, as new features are added and generic models are adapted to local circumstances. Our sample demonstrated experimentation with benchmarking in the USA, comprehensive regulation in Asia, and voluntary approaches in Australia. Overall, environmental impacts are particularly slow to emerge and plagued with attribution challenges. We found limited evidence of benchmarking programme effectiveness in reducing energy consumption in the short-term, but some indication of mid-term outcomes. Driven by unique local circumstances, the cap-and-trade model stood out by fostering large, sustained and attributable GHG emission reductions and retrofitting. Market and social impacts are highly significant across all programmes, highlighting needs to consider non-environmental impacts in policy evaluation. We emphasise the complementary potential of voluntary and regulatory approaches to advancing energy efficiency and climate resilience. We also underscore the potential for reporting or benchmarking programmes to later transition to models mandating performance improvements, such as cap-and-trade.     

THE DISCHARGE OF SEDIMENT IN CHANNELIZED ALLUVIAL STREAMS1

ABSTRACT: Approximately 400 million cubic feet of channel sediments have been delivered to the Mississippi River from the Obion-Forked Deer River system in the last 20 years. The discharge of sediment from these channelized networks in West Tennessee varies systematically with the stage of channel evolution. Variations in yields over time reflect the shifting dominance of fluvial and mass-wasting processes as the networks adjust to lower energy conditions. Maximum bed-material discharges occur during the initial phases of degradation (Stage III). In contrast, yields of suspended-sediment peak during the threshold stage (Stage 1V: large-scale mass wasting) as sediments are delivered from main-channel banks and tributary beds. Suspended-sediment yields then decrease as aggradation (Stage V) becomes the dominant trend in the main channels, but remains relatively high through restabiliza-tion (Stage VI) because of continued degradation and widening in the tributaries. Bed-material discharges decrease from the degradation stage (III) to Stage V, and increase again during restabiliza-tion (Stage VI) because secondary aggradation increases gradients and incipient meandering serves to rework bed sediments. This secondary maxima in bed-material discharge is analogous to those described previously as complex, or oscillatory, response. The trends of sediment production and transport described from these rejuvenated networks are in agreement with experimental and theoretical results of earlier investigations.     

Local Area Quotas for Industrial Emissions along Reaches of the Pearl River in Guangdong

There is an obvious departure from the regional equilibrium of developments between the upper and lower reaches of the Pearl River in Guangdong, which resulted in ＂the effects of contra-geography-grads development＂. It is mainly because the upriver mountainous areas have been deeply stuck in industrialization delay and marginalization plights, so that nearly 40 million local people have conceived a dream to get rid of ＂the vicious circle of poverty＂ by speeding up industrial development. But the problem is that such industrialization efforts on a large scale in mountainous areas are encountering the bottleneck of environmental capacity that strictly limits industrial emissions along the upper reaches of any water system. As a solution, an institutional arrangement called ＂the Local Area Quotas for Industrial Emissions along the Pearl River＂ is put forward supposed to give corresponding compensation to the rights of industrial development yielded by some areas with lower environmental capacity through the distribution and trading of IDQs.     

Microbial biomass yield and turnover in soil biodegradation tests: carbon substrate effects

Most of the standardized biodegradation tests used to assess the ultimate biodegradation of environmentally degradable polymers are based solely on the determination of net evolved carbon dioxide. However, under aerobic conditions, it has to be considered that heterotrophic microbial consortia metabolize carbon substrates both to carbon dioxide and in the production of new cell biomass. It is generally accepted that in the relatively short term, 50% of the carbon content of most organic substrates is converted to CO₂, with the remaining carbon being assimilated as biomass or incorporated into humus. The latter is particularly important when the metabolism of the organic matter occurs in a soil environment. A straightforward relationship between the free-energy content of a carbon substrate (expressed as the standard free-energy of combustion) and its propensity for conversion to new microbial biomass rather than mineralization to CO₂ has been established. This can potentially lead to underestimation of biodegradation levels of test compounds, especially when they consist of carbon in a fairly low formal oxidation state and relatively high free-energy content. In the present work, the metabolism of different kind of carbon substrates, especially in soil, is reviewed and compared with our own experimental results from respirometric tests. The results show that conversion of highly oxidized materials, such as the commonly used reference materials, cellulose or starch, to CO₂ may be significantly overestimated. The addition of glucosidic material to soil leads to greatly increased respiration and is accompanied by a very low conversion to biomass or humic substances. In contrast, relatively less oxidized substrates metabolize more slowly to give both CO₂ and biomass to an extent which may be significantly underestimated if glucosidic materials are used as the reference. The need for an overall carbon balance taking into account both the carbon immobilized as biomass and that volatized as CO₂ must be considered in standard respirometric procedures for assessing the biodegradability of slowly degrading macromolecules.     

Energy metabolism and growth of Monoporeia affinis Lindstr. in the Northern Lake Krivoe (Karelia)

The physiological method for estimating production based on the relationship between growth and energy metabolism has been used for calculating model growth curves for the amphipod Monoporeia affinis and comparing them with the results of field studies. Calculations demonstrated that the physiological growth curves fit the results of field observations best under certain conditions which have zoological sense: the growth curve should reflect the actual maximum body size of an animal in the given population, the duration of the life cycle, and the time required for reaching the reproductive size.     

管式电除尘器“伞形罩”结构的应用

本文通过分析立式管式电除尘器结构及使用现状 ,总结其失效的主要原因在于阳极 (圆筒管 )的清灰不力。为解决清灰不力的问题 ,提出了“伞形罩”阳极结构 ,其具有的不积尘、自动排灰功能 ,经实践检验 ,效果显著     

乡镇工业电镀行业主要污染物排放量的估算方法

电镀分有氰电镀与无氰电镀两类。乡镇工业电镀行业的环境污染最主要是氰污染和铬污染。本文针对乡镇电镀行业的特点,调查了湖南省沅江市、四川省新都县、湖北省黄陂县、汉川县以及江苏省部分县市乡镇电镀厂,将收集资料及实际监测资料进行回归分析,得出乡镇电镀行业的污染物发生量大小与原材料的消耗有关,可以用多元回归方程估算乡镇电镀行业主要污染物发生量。这一估算方法简单易行,实用可靠,操作方便。