An easy method to design gas/vapor relief system with rupture disk

Tank discharge gas/vapor flow problems are frequently encountered in both practice and design. To perform this type of design calculation, the first step is to identify whether the flow is choked or not through a trial-and-error solution of an equation for adiabatic flow with friction from a reservoir through a pipe. Developing a direct method without any trial-and-error to identify a choking condition would be helpful for expediting the flow calculations. This paper presents an easy and quick method to identify the choking of gas flow for an emergency relief system consisting of a rupture disk and vent piping. This greatly simplifies the design calculations. The proposed method for validating the venting adequacy of existing ERS circumvents the iteration calculation and the use of Lapple charts. Three case studies for the design of vent piping for rupture disks support the proposed method.     

Research on whole life cycle carbon emission model of typical buildings

Based on the theory of life cycle assessment (LCA), this article analyzes the influence factors on carbon emissions from residential buildings. In the article, the life cycle of residential buildings has been divided into five stages: building materials production period, construction period, operation and maintenance period, demolition period, and solid waste recycle and disposal period. Based on this definition, the authors provide a theoretical model to calculate carbon emissions of residential building life cycle. In particular, the factor of human activities was introduced in the calculation of carbon emissions from the buildings. Furthermore, the authors put forward a model for calculation with the unit of carbon emissions for per-capita living space.     

火工品温湿度加速老化模型和算法研究

目的 研究对火工品适用的温湿度加速模型,以及加速系数计算程序,获取准确的温湿度加速系数外推公式.方法 通过分析国内外使用的各种双因素加速模型的适用性,确定火工品适用的温湿度加速模型,采用免费自由的开源统计分析软件——R软件,对通过加速试验获取的某点火头2种温湿度加速条件下的试验数据,进行单组数据拟合和多组数据拟合两种温湿度加速老化算法的开发,并且对2种算法、3种寿命分布下寿命外推的准确性进行对比分析.结果 确定了Peck模型适合用于火工品的温湿度加速模型,获取了某电点火头对应的温湿度加速系数和湿度项反应速率常数.结论 基于多组数据拟合的温湿度加速老化算法,比基于单组数据拟合的温湿度加速老化算法对试验数据的兼容性好.3种寿命分布中,Weibull分布的加速系数计算结果最保守.     

离心式机械振动台基本参数设计计算方法的探讨

该文叙述了离心式机械振动台的工作原理,提出了计算思路和方法;推导了其计算公式;并根据工程的实际情况,把复杂的计算公式,简化成代数运算式。     

Theoretical insights into the degradation mechanisms, kinetics and eco-toxicity of oxcarbazepine initiated by OH radicals in aqueous environments

As an anticonvulsant, oxcarbazepine (OXC) has attracted considerable attention for its potential threat to aquatic organisms. Density functional theory has been used to study the mechanisms and kinetics of OXC degradation initiated by OH radicals in aqueous environment. A total of fourteen OH-addition pathways were investigated, and the addition to the C8 position of the right benzene ring was the most vulnerable pathway, resulting in the intermediate IM8. The H-abstraction reactions initiated by OH radicals were also explored, where the extraction site of the methylene group (C14) on the seven-member carbon heterocyclic ring was found to be the optimal path. The calculations show that the total rate constant of OXC with OH radicals is 9.47 × 10⁹ (mol/L)⁻¹sec⁻¹, and the half-life time is 7.32 s at 298 K with the [·OH] of 10⁻¹¹ mol/L. Moreover, the branch ratio values revealed that OH-addition (89.58%) shows more advantageous than H-abstraction (10.42%). To further understand the potential eco-toxicity of OXC and its transformation products to aquatic organisms, acute toxicity and chronic toxicity were evaluated using ECOSAR software. The toxicity assessment revealed that most degradation products such as OXC-2OH, OXC-4OH, OXC-1O-1OOH, and OXC-1OH' are innoxious to fish and daphnia. Conversely, green algae are more sensitive to these compounds. This study can provide an extensive investigation into the degradation of OXC by OH radicals and enrich the understanding of the aquatic oxidation processes of pharmaceuticals and personal care products (PPCPs).     

分洪区洪灾保险工作初探

本文从洪水过程的随机特点及防洪工作的实际需要等各个方面出发,阐述了在分洪区实行洪灾保险的必要性,结合国内外已有的实践经验,分析了这一工作得以顺利开展的可能性。并在此基础上,提出了二种洪灾保险费用计算方法,实例计算结果表明,这些方法是基本可行的。     

旋流式脱水器分离最小水滴理论计算

介绍了旋流式的构造和工作原理,分析了影响性能的因素。通过对脱水器构造的剖析,找出叶片形状影响脱水效果的关键所在,从理论分析入手,推导出旋流式脱水器分离最小直径水滴的计算方法,并根据工程实践进行了检验。工程实践表明,实际应用效果与理论计算相符合。     

污水生化处理耗氧量计算与应用

根据各类型好氧工艺运行的特点,结合多年设计经验,给出详细计算公式和参数选择范围,说明每个参数含义。     

基于我国人群胃肠消化特征的土壤中As的人体可给性研究

基于我国人群胃肠消化特征,采用医学配方模拟胃肠消化方法测试了来自大连、湖南和广西的13个受重金属污染土壤中As的人体可给性,分析了土壤理化参数与可给性的相关关系及提取液中酶、胃肠液pH值、提取时间对As的人体可给性的影响.结果表明,医学配方可给性测试中,供试土样在胃、肠阶段As的人体可给性分别为5.03%~44.54%和10.77%~51.46%,平均值为18.08%、29.32%.胃阶段As的可给性浓度与土壤中总As含量w（TAs）、总P含量w（TP）极显著正相关,与总Al含量w（TAl）、土壤pH值、总有机质含量w（TOM）显著相关;肠阶段As的可给性浓度与土壤中w（TAs）、胃阶段As的可给性浓度、w（TP）极显著相关,与土壤pH值、w（TAl）和w（TOM）显著相关.胃阶段提取液中的胃蛋白酶显著降低了As的可给性,而肠阶段添加胰蛋白酶As的可给性没有明显变化.胃、肠阶段分别在pH值为0.9和5.0时可给性最大,0.9和5.0可分别作为土壤As在可给性测试过程中模拟胃肠液的pH值.胃、肠阶段在提取时间分别为1.0h、4.0h时可给性达到最大,且之后基本不变,1.0h、4.0h可作为模拟测试As在胃肠中可给性的提取时间.研究结果表明开展基于我国人群胃肠消化特征的土壤重金属人体可给性测试方法具有重要意义.     

圆环巴西试验的抗拉强度建议公式

目的改进Hobbs公式得到的计算值普遍较大这一问题,提出圆环巴西试验的抗拉强度建议公式。方法对巴西试验圆环的应力解进行分析,并引用砂岩的试验数据验证。结果得到圆环巴西试验的抗拉强度建议公式,使用Hobbs公式得到的抗拉强度σTT比巴西圆盘试验σT大6倍以上,利用建议公式得到的抗拉强度σθ与巴西圆盘试验σT十分接近,误差不到1%。结论当圆环内外径比ρ在0.05到0.15的范围内时,该建议公式可很好地用来计算岩石类等脆性材料的抗拉强度。