游憩导向下国土空间生态修复的理论与模式

游憩导向下国土空间生态修复是将受损生态空间保护与休闲空间融合的重要手段,是构建山水林田湖草命运共同体与提高人类福祉的重要内容。基于国内外研究现状,界定了游憩导向下国土空间生态修复的概念,提出其应遵循生态系统服务理论、人地关系地域系统理论、区位理论、景观基因理论、大地艺术理论五大理论逻辑。基于实践案例归纳了游憩导向下生态修复模式类型、特征与问题,并提出实践模式的五大优化路径,包括明确功能适宜、效益最优的修复导向,建立多级空间尺度联动的传导机制,提升游憩导向下生态修复地的地方嵌入性,加强修复效果的动态监测评估,构建可持续的建设与运营管理模式,以期为游憩导向下国土空间生态修复和保护提供理论和实践参考。     

Combined UV-C/H2O2-VUV processes for the treatment of an actual slaughterhouse wastewater

In this study, a three-factor, three-level Box-Behnken design with response surface methodology were used to maximize the TOC removal and minimize the H₂O₂ residual in the effluent of the combined UV-C/H₂O₂-VUV system for the treatment of an actual slaughterhouse wastewater (SWW) collected from one of the meat processing plants in Ontario, Canada. The irradiation time and the initial concentrations of total organic carbon (TOC_o) and hydrogen peroxide (H₂O_2o) were the three predictors, as independent variables, studied in the design of experiments. The multiple response approach was used to obtain desirability response surfaces at the optimum factor settings. Subsequently, the optimum conditions to achieve the maximum percentage TOC removal of 46.19% and minimum H₂O₂ residual of 1.05% were TOC_o of 213 mg L^?1, H₂O_2o of 450 mg L^?1, and irradiation time of 9 min. The attained optimal operating conditions were validated with a complementary test. Consequently, the TOC removal of 45.68% and H₂O₂ residual of 1.03% were achieved experimentally, confirming the statistical model reliability. Three individual processes, VUV alone, VUV/H₂O₂, and UV-C/H₂O₂, were also evaluated to compare their performance for the treatment of the actual SWW using the optimum parameters obtained in combined UV-C/H₂O₂-VUV processes. Results confirmed that an adequate combination of the UV-C/H₂O₂-VUV processes is essential for an optimized TOC removal and H₂O₂ residual. Finally, respirometry analyses were also performed to evaluate the biodegradability of the SWW and the BOD removal efficiency of the combined UV-C/H₂O₂-VUV processes.     

燃煤火电厂废气排污费的计算方法探讨

根据《排污费征收标准管理办法》的相关规定，探讨了燃煤火电厂废气排污费的计算方法，确定燃煤火电厂需要缴纳排污费的废气污染物按照从多到少的次序依次为二氧化硫、氮氧化物和烟尘。     

优化引射除尘器性能的研究

在采煤工作面,煤尘污染严重威胁煤矿生产和工作健康,本文介绍了用于放顶煤工作面降除尘的引射除尘器。从优化引射除尘器性能的角度出发,设计了实验系统。运用正交分析的方法,确定了引射除尘器的最佳结构。     

板料冲压成形中坯料优化设计方法研究

较为系统地介绍了冲压件坯料的优化设计方法 ,并比较分析了其各自的优缺点。相比于其他方法 ,一步模拟方法效率高、适应面广、功能较强 ,可以在产品的设计之初提供较为丰富的信息。因此 ,对其作了较为详细的论述。实例证明 ,一步模拟法可用于板料成形工艺方案的快速评价及参数优化。     

薄壁钢管弯曲模具设计

分析了薄壁钢管弯曲时产生瘪皱的原因,提出了弯管模具关键参数的设计计算方法,保证了弯管质量.     

Two-dimensional numerical algorithm for water qualitymodeling in the topographically complicated river

1　ＩｎｔｒｏｄｕｃｔｉｏｎＡｃｃｏｒｄｉｎｇｔｏｔｈｅＨｕｎａｎｃｏｍｐｏｎｅｎｔｏｆｔｈｅｐｒｏｐｏｓｅｄｉｎｌａｎｄｗａｔｅｒｗａｙｓｍｕｌｔｉｐｕｒｐｏｓｅｐｒｏｊｅｃｔ,ｔｈｅＤａｙｕａｎｄｕｎａｖｉｇａｔｉｏｎａｌｋｅｙｐｒｏｊｅｃｔ,ｌｏｃａｔｅｄ 6 2ｋｍｄｏｗｎｓｔｒｅａｍｆｒｏｍｔｈｅＨｅｎｇｙａｎｇＣｉｔｙ ,ｗｉｌｌｂｅｂｕｉｌｔｗｉｔｈｔｈｅｈｅｌｐｏｆｔｈｅｗｏｒｌｄｂａｎｋｌｏａｎ .Ａｆｔｅｒｔｈｅｐｒｏｊｅｃｔｂｅｉｎｇｃｏｎｓｔｒｕｃｔｅｄ ,ｔｈｅＸｉａｎｇｊｉａｎｇ…     

浅谈清洁生产审核中经济效益的核算方法

根据财务管理学理论,结合清洁生产审核工作实际,分析各地清洁生产审核中的经济效益核算方法的差异,提出简洁实用的核算方法。     

大气固定污染源监测分析方法的标准化研究

论述了大气监测分析方法标准化研究的特点、内容、样品采集方法和保存条件，样品预处理方法和测定条件，干扰试验、方法的基本特征参数第一轮测定、实际样品的测定等问题。     

ECO-design of reuse and recycling networks by multi-objective optimization

An ECO-optimized reuse of process liquors addresses the financial gain and the effective use of resources. In processes that have a potential for process liquor recovery, the minimization of both economic and environmental burdens can be realised by an ECO-optimal design of reuse and recycling network (RRN).In this paper, a procedure for synthesizing such an RRN for a metal finishing process is investigated. The simultaneous analysis of environmental impact sensitivity (SAEIS) based on a superstructure approach, combined with multi-objective optimization is performed by mixed-integer nonlinear programming (MINLP). This allows an “eco–eco” trade-off i.e. total annualized cost and environmental impacts are minimized simultaneously. By varying the weighting factor, different RRN alternatives were generated. A replacement of the standard and closed-loop system by these solutions, even for the environmentally friendliest case, yielded a reasonable cost saving on raw material's inputs.