4-氯苯酚在水溶液中的光化学反应(Ⅰ)单线态氧和自由基的产生

在模拟太阳光照射下，４氯苯酚（４ＣＰ）浓度迅速降低，反应过程对应着产生大量的单线态氧和自由基．金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋能够加速这一过程，尤以Ｆｅ２＋、Ｆｅ３＋的影响更明显；在模拟太阳光照射下，向４ＣＰ体系加入的富里酸（ＦＡ），对４ＣＰ浓度降低略起抑制作用，这表明二者之间存在相互作用．但当再加入金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋后，能够加速４ＣＰ浓度降低，尤以Ｆｅ２＋、Ｆｅ３＋的影响更显著．     

生物传感器快速测定BOD在海洋监测中的应用

选用一株耐高渗透压的酵母菌种作为敏感材料可以实现BOD的快速测定。采用海藻酸钙包埋法和聚乙烯醇包埋法两种细胞固定化方法并进行了比较。就聚乙烯醇固定化微生物进行了渗稼压和重金属离子影响的研究。     

水环境化学作用CAI课件的制作

计算机辅助教学CAI（Computer-Assisted Instruction)是现代计算机技术发展与教学内容相结合的产物。本文主要介绍了计算机辅助教学CAI课件的优点和特点。详细说明了水环境化学作用CAI课件的制作过程，探讨了具体制作一个CAI课件的流程。     

加强危险化学物品仓库安全管理的探讨

本文着重讨论了加强危险化学物品仓库安全管理的一些行之有效的科学方法，并对有关问题提出了一些个人看法。     

油气田开发与炼化企业硫化氢危害分析与预防

分析了油田开发和炼油化工生产过程中H2S的分布区域、特点及危害.通过对66起H2S中毒事故的分析,指出在设备及管线的吹扫、堵漏、拆卸、安装作业过程中较易发生H2S中毒事故;事故主要是由于违章及误操作以及对H2S的毒害认识不够、安全意识差引起的.从管理措施、技术支持、人员培训、应急救援等方面提出了预防H2S中毒的措施.     

高级氧化技术强化皮革废水生化处理效果初探

皮革废水中含大量难降解有机物,导致常规好氧生化处理速率低、效果差.实验考察了在Us(超声波)、UV(紫外光)、US/Fenton、UV/Fenton等高级氧化技术强化作用下的生化处理效果,结果表明,在相同水质和实验条件下,废水经Us、UV处理30min后可使后续生化反应速率显著提高,分别反应8h、24h后的COD去除率即可达到直接经微生物处理48h后达到的48%,但延长反应时间至48h对COD去除率没有明显提高;Fenton试剂强化US、UV的处理效果要高于单独Us、UV工艺,经30min预处理,随后在微生物作用下分别反应4h和8h即可达到45%和51%的COD去除率,同时延长反应时间也能使最终COD去除率明显提高,反应48h后,COD去除率可分别提高至64%和72%.     

Synergistic effect of F and triggered oxygen vacancies over F-TiO2 on enhancing NO ozonation

Oxidation-absorption technology is a key step for NO_x removal from low-temperature gas. Under the condition of low O₃ concentration (O₃/NO molar ratio = 0.6), F-TiO₂ (F-TiO₂), which is cheap and environmentally friendly, has been prepared as ozonation catalysts for NO oxidation. Catalytic activity tests performed at 120°C showed that the NO oxidation efficiency of F-TiO₂ samples was higher than that of TiO₂ (about 43.7%), and the NO oxidation efficiency of F-TiO₂-0.15 was the highest, which was 65.3%. Combined with physicochemical characteristics of catalysts and the analysis of active species, it was found that there was a synergistic effect between F sites and oxygen vacancies on F-TiO₂, which could accelerate the transformation of monomolecular O₃ into multi-molecule singlet oxygen (¹O₂), thus promoting the selective oxidation of NO to NO₂. The oxidation reaction of NO on F-TiO₂-0.15 follows the Eley-Rideal mechanism, that is, gaseous NO reacts with adsorbed O₃ and finally form NO₂.     

腕足类生物壳体在沉积、成岩过程中同位素平衡问题研究

综合分析了现代腕足类生物壳体方解石中的C、O同位素特征，以及有关古生代腕足类生物壳体方解石构造和地球化学研究成果，分析结果证明：只有那些无发光性特点、无胶结和溶蚀构造特点、有较好纤维构造特点、含高Sr、Na和低Mn、Fe（Mg）的第二层腕足类生物壳体方解石的δ18O值不受成岩作用影响；而原始层和壳体中的特殊部位如铰合轴、腕骨、茎孔、交互面、肌痕等在沉积、成岩过程中与海水处于非同位素平衡状态。     

A／O工艺处理石油化工废水试验研究

本文介绍了采用Ａ／Ｏ新工艺组合处理高浓度的炼油、化工混合废水中试情况，试验结果表明；Ａ／Ｏ新工艺组合具有抗冲击性能好，产泥量少，在一定条件下，出水各项指标达标排放，还就填料选择、含氮化合物的消化反应、污泥生物相和各池工艺参数相互关系进行了讨论。     

Insights into reactive oxygen species formation induced by water-soluble organic compounds and transition metals using spectroscopic method

Ambient particulate matter (PM) can cause adverse health effects via their ability to produce Reactive Oxygen Species (ROS). Water-Soluble Organic Compounds (WSOCs), a complex mixture of organic compounds which usually coexist with Transition Metals (TMs) in PM, have been found to contribute to ROS formation. However, the interaction between WSOCs and TMs and its effect on ROS generation are still unknown. In this study, we examined the ROS concentrations of V, Zn, Suwannee River Fulvic Acid (SRFA), Suwannee River Humic Acid (SRHA) and the mixtures of V/Zn and SRFA/SRHA by using a cell-free 2′,7′-Dichlorodihydrofluorescein (DCFH) assay. The results showed that V or Zn synergistically promoted ROS generated by SRFA, but had an antagonistic effect on ROS generated by SRHA. Fluorescence quenching experiments indicated that V and Zn were more prone to form stable complexes with aromatic humic acid-like component (C1) and fulvic acid-like component (C3) in SRFA and SRHA. Results suggested that the underlying mechanism involving the fulvic acid-like component in SRFA more tending to complex with TMs to facilitate ROS generation through π electron transfer. Our work showed that the complexing ability and complexing stability of atmospheric PM organics with metals could significantly affect ROS generation. It is recommended that the research deploying multiple analytical methods to quantify the impact of PM components on public health and environment is needed in the future.