废旧线路板次氯酸盐法浸金的实验研究

研究了酸性条件NaClO-HCl和碱性条件NaClO-NaOH下浸出废旧线路板中的金.通过正交设计优化实验比较发现,NaClO-NaOH碱性体系浸金较有优势,其最佳的浸金条件为NaClO浓度6 mol/L,NaOH浓度8 mol/L,固液比l∶6,反应时间40 min,金的浸出率可达到94.5%.次氯酸盐浸金具有浸金效...     

Thermal decomposition of electronic wastes: mobile phone case and other parts

Pyrolysis and combustion runs at 850°C in a horizontal laboratory furnace were carried out on different parts of a mobile phone (printed circuit board, mobile case and a mixture of both materials). The analyses of the carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorodibenzo-p-dioxin, polychlorodibenzofurans (PCDD/Fs), and dioxin-like PCBs are shown. Regarding semivolatile compounds, phenol, styrene, and its derivatives had the highest yields. In nearly all the runs the same PAHs were identified, naphthalene being the most common component obtained. Combustion of the printed circuit board produced the highest emission factor of PCDD/Fs, possibly due to the high copper content.     

废旧电路板制备的酚醛树脂的研究

废旧电路板中的树脂与碳酸钙共同加热,获得气体、固体和热解油3种热解产物.以电路板的热解油为原料、以热解过程中产生的氨气为催化剂,可以合成醇溶性热解油酚醛树脂,经分析测试表明,其组成、结构和固化特征与常规工业生产的氨催化酚醛树脂的性能相近,主要性能指标:粘度、游离酚浓度和胶合强度等均可达到醇溶性酚醛树脂产品的质量要求.     

废弃印刷线路板资源化处理的研究进展

介绍了当前废弃印刷线路板资源化处理的主要方法,包括湿法、火法、机械法、生物法、超临界流体法和等离子体熔炼法等。综述了各种处理方法的侧重点及利弊;提出热解法与机械法联用可较好地解决在破碎过程中所遇到的问题,具有较大优势,可作为未来大量废弃印刷线路板资源化处理工艺研究的重点。     

用废旧电路板热解油制备酚醛树脂

在碳酸钙存在下,采用热解技术将废旧电路板中的树脂转化为富含酚的热解油,然后直接加入甲醛溶液反应制备热解油型酚醛树脂,实现了废旧电路板中树脂的再生,酚醛树脂的性能结构类似于氨催化的酚醛树脂。实验结果表明：在n（甲醛）：n（热解油）为1．8～2．1的条件下,无需外加催化剂,在60,80,90℃下分别反应30min制备的热解油型酚醛树脂的性能最佳,且可满足GB／T14732—93《木材工业胶黏剂用脲醛、酚醛、三氧氰胺甲醛树脂》中层压材料用酚醛树脂产品的相关标准。     

火场中纸面石膏板显微结构的SEM分析

运用SEM(扫描电子显微镜),对经历不同火场温度的纸面石膏板试块的显微结构进行观察和分析.结果表明:纸面石膏板在受热时,其组成、结构将发生改变.当受热温度达到300℃时,护面纸与石膏芯材的结合松动,护面纸发生热分解、炭化,以及石膏芯材网状晶体骨架结构疏松、断裂、破碎,完整性遭到破坏,强度基本丧失;受热温度越高,纸面石膏板显微结构的破坏越严重.     

Dust explosion incidents and regulations in the United States

The U.S. Chemical Safety and Hazard Investigation Board (CSB) investigated three fatal dust explosions that all occurred in 2003. These explosions caused the deaths of 14 people and injured hundreds more. Two of the facilities were damaged beyond repair, and several hundred employees lost their jobs.

CSB's investigations revealed that the explosions had common causes, despite their geographic and industrial diversity. Consequently, CSB commissioned a study of combustible dust fire and explosion hazards. This paper presents a summary of CSB's findings and recommendations developed during that study.     

The Wild Kangaroo Industry: Developing the Potential for Sustainability

Wildlife resources the world over have long been subject to harvest and management. As wildlife uses have grown, so too have the need and desire to ensure their sustainability. This new context of sustainability presents opportunities to merge ecological, economic and social elements to foster development. This paper presents the management and harvesting of wild kangaroos as an example of the potentially sustainable use of a natural resource. Some comparisons are drawn between the use of other wild living resources, deer in Europe and crayfish in Western Australia. However, sustainability of kangaroo species and the industry is not just a matter of market economics and ecology, it must also be socially sustainable. The public policy instrument of a statutory advisory board with a marketing function is proposed in order to integrate the cultural and social aspects of kangaroo management with the economic and ecological aspects. Through such integration, full sustainability of a wild resource then might be achieved.     

世界废弃印刷电路板的机械处理技术现状

电子废弃物中废印刷电路板的处置 ,一直是相当复杂的问题。根据废电路板中各种组分的结合方式 ,采用机械方法进行材料的分离 ,是经济适用并与环境相协调的处理手段。本文介绍了废电路板再利用技术中采用的各种机械设备 ,并总结了国外机械处置方法的实践进展。     

配电线路发生火灾事故的原因及预防

介绍了配电线路在运行中发生短路、过负荷以及导线或电缆接头处接触电阻过大而引起导线过热、产生火花和电弧引起火灾事故的原因。并针对上述原因 ,提出安全用电 ,预防配电线路发生火灾事故的安全技术措施