A mathematical model of crevice corrosion for buried pipeline with disbonded coatings under cathodic protection

Crevice corrosion occurs in a holiday and disbonded region between coating and pipeline steel. Cathodic protection (CP) is generally recognized as the most effective method for corrosion prevention of pipeline, but its effectiveness may be reduced at defects in a disbonded coating. It is difficult to measure and probe corrosion parameters accurately based on experimental work. Therefore, a mathematical model is necessary to identify the phenomena and mechanisms that contribute to the crevice corrosion process. In this work, a mathematical model was developed to determine the evolution of chemical and electrochemical transient processes of crevice corrosion in NaCl dilute solution, and the effect of cathodic protection and crevice width on corrosion of 20# steel pipeline with disbonded coatings. Results have demonstrated that the extent of crevice corrosion depends on the crevice geometry and could be influenced by the increase of crevice depth and decrease of its width. The oxygen concentrations drop significantly inside a crevice whether CP is applied or not and whether crevice width decreased or not. The pH values and conductivity of crevice solution increase with the time. The research provides a theoretical foundation for cathodic protection of pipelines and establishes an effective corrosion model which can identify the phenomena and mechanisms of the crevice corrosion process. This work could be used to help mitigate the corrosion failure of pipelines to prevent catastrophic accidents in oil, gas and chemical process industries.     

磷酸盐对亚硝化系统的抑制及恢复

通过接种城镇污水处理厂的污泥,采用连续流反应器启动亚硝化系统并改变进水磷酸盐的浓度,研究了不同磷酸盐浓度对亚硝化系统的影响.结果表明经过14 d的运行,亚硝化系统启动成功,氨氮转化率达到92.2%,亚硝酸盐累积率为73.66%,亚硝酸盐产生速率达到14.42 g·(m~3·d)~(-1).磷酸盐浓度在10~30 mg·L~(-1)时对亚硝化系统的影响并不大;随着磷酸盐浓度持续提高,氨氮转化率在不断降低.当磷酸盐的浓度为80 mg·L~(-1)时,系统的氨氮转化率为13.6%,亚硝酸盐累积率仅18.19%,亚硝酸盐产生速率仅0.54 g·(m~3·d)~(-1),亚硝化反应受到严重抑制.将进水磷酸盐浓度降低到0,经过14 d运行,亚硝化系统获得恢复,且氨氮转化率可以达到80%以上,亚硝酸盐累积率达到86.96%,亚硝酸盐产生速率为15.63g·(m~3·d)~(-1).     

我国工业危险废物的来源、处理及监管对策与建议

通过大量环境统计数据的分析,对我国工业危险废物的产生、综合利用、处置和贮存,从行业来源、区域分布进行了分析和总结。结合我国工业危险废物企业自建设施和政府集中处理设施处理情况,对我国工业危险废物的处理和环保监管对策提出了若干建议。     

Effects of free ammonia on volatile fatty acid accumulation and process performance in the anaerobic digestion of two typical bio-wastes

The effect of free ammonia on volatile fatty acid(VFA)accumulation and process instability was studied using a lab-scale anaerobic digester fed by two typical bio-wastes:fruit and vegetable waste(FVW)and food waste(FW)at 35°C with an organic loading rate(OLR)of 3.0 kg VS/(m~3·day). The inhibitory effects of free ammonia on methanogenesis were observed due to the low C/N ratio of each substrate(15.6 and 17.2,respectively). A high concentration of free ammonia inhibited methanogenesis resulting in the accumulation of VFAs and a low methane yield. In the inhibited state,acetate accumulated more quickly than propionate and was the main type of accumulated VFA. The co-accumulation of ammonia and VFAs led to an "inhibited steady state" and the ammonia was the main inhibitory substance that triggered the process perturbation. By statistical significance test and VFA fluctuation ratio analysis,the free ammonia inhibition threshold was identified as 45 mg/L. Moreover,propionate,iso-butyrate and valerate were determined to be the three most sensitive VFA parameters that were subject to ammonia inhibition.     

军绿有机涂层和金属漆涂层全浸泡下的腐蚀行为对比研究

目的针对车辆装备长期在高盐雾、高湿热、高日照等恶劣的气候环境下使用,会受到腐蚀影响的现状,探究现役军用有机涂层防护性能。方法采用电化学阻抗谱技术研究军绿有机涂层和金属漆涂层在3.5%NaCl溶液中的腐蚀电化学行为,分析这两种涂层在浸泡期间的电化学阻抗谱特征,通过拟合等效电路得到涂层电阻R_c和涂层电容C_c,并用这两个电化学参数评价军绿有机涂层和金属漆涂层的耐蚀性能。结果军绿有机涂层抗腐蚀介质渗透能力很强,而金属漆涂层抗腐蚀介质渗透能力稍弱。结论两种涂层都表现出很好的防护性能,且金属漆涂层在腐蚀后期的防护性能要优于军绿有机涂层。     

海洋环境下ZL115-T5铸铝合金/C41500海军黄铜腐蚀行为研究

目的研究海军某型装备壳体结构材料在海洋环境下的腐蚀行为及规律。方法根据折算出的实验室加速腐蚀试验环境谱,开展了ZL115-T5铸铝合金试验件、ZL115-T5铸铝合金/C41500海军黄铜接触试验件、模拟实际涂抹黄油试验件以及模拟维护涂抹缓蚀剂试验件的实验室加速腐蚀试验。结果得到了该型铝合金在不同服役年限及服役状态下的腐蚀形貌、质量、平均腐蚀深度以及腐蚀损伤度变化规律。结论该型合金在不同服役状态下的腐蚀行为呈现差异化,ZL115-T5铸铝合金与C41500海军黄铜偶合接触会加速铸铝合金的腐蚀,黄油能够在一定程度上抑制电偶腐蚀,但效果并不明显。缓蚀剂能够延缓海洋环境下ZL115-T5铸铝合金腐蚀,其中THFS-10软膜缓蚀剂以及THFS-15长效硬膜缓蚀剂效果较好。     

富营养化淡水中黑色金属试样腐蚀加速的微生物学机制研究

目的探究黑色金属在污染淡水中后期腐蚀加速规律的生物学机制。方法采用高通量测序分析A3钢在富营养化水体和清洁水体中腐蚀产物内微生物的种群结构,并结合元素分析和XPS分析。结果获得了A3钢的腐蚀产物内微生物的门水平物种分布柱状图、OTU估计数统计表、OTU韦恩图、硫酸盐还原菌各属的相对丰度、微生物属水平热图等数据。结论在富营养化水体中,硫酸盐还原菌呈现更显著的水平,造成金属的硫化腐蚀更为严重,验证了黑色金属在富营养化污染淡水水体中后期腐蚀速率反转加速的现象。     

三种流速下高强钢与微弧氧化钛电偶腐蚀研究

目的研究三种流速下微弧氧化钛和高强钢的电偶腐蚀行为。方法在面积比为1:1情况下进行1,3,7 m/s流速下的电化学测试和电偶腐蚀试验研究。结果随着流速的增大,偶合电流、总腐蚀速率和电偶腐蚀速率增大。当流速为7 m/s时,高强钢总腐蚀速率和电偶腐蚀速率分别达到8.64 mm/a和0.39 mm/a,与静态相比分别增大146倍和15.6倍,与1 m/s流速下相比分别增大8.6倍和5倍。结论在面积比为1:1时,冲刷腐蚀速率远大于电偶腐蚀速率。     

某型机襟翼舱下壁板蒙皮腐蚀原因分析与修理措施研究

目的研究某型机襟翼舱下壁板蒙皮产生腐蚀损伤的原因,分析腐蚀危害性,制定腐蚀修补方案,提出后续腐蚀防护与控制的建议措施。方法首先现场仔细检查结构的腐蚀状况,然后分别从结构设计与选材、服役环境分析、腐蚀产物分析3个方面研究结构腐蚀产生的成因,并且针对性地制定腐蚀部位的补强修理方案。结果在襟翼舱局部高温湿热环境下形成的内部冷凝水,夹杂大气环境中的Cl~-污染侵袭,导致壁板蒙皮材料LY12铝合金产生了晶间剥落腐蚀。结论老龄飞机机体结构腐蚀成因复杂多样,准确界定腐蚀原因是制定腐蚀防护与控制措施的关键。     

热带海洋大气环境下X70管线钢的缝隙腐蚀行为研究

目的研究X70管线钢在热带海洋大气实海环境下的缝隙腐蚀行为。方法在距离湛江东海岛海岸50m和200 m处分别搭建楔型缝隙模型,安装大气环境Cl-收集装置和自动气象监测站。结果距离海岸越近,风速越大,大气中Cl-沉降速率也越大,X70管线钢缝隙腐蚀越严重。X70管线钢在距离海岸50 m处发生缝隙腐蚀的最大缝宽约为0.96 mm,200 m处最大缝宽约为3.75 mm,50 m处缝隙腐蚀更严重。结论缝隙腐蚀区域形成了氧浓差电池,同时随着缝隙液中Cl-向缝隙内迁移,发生闭塞区电池自催化过程,在二者共同作用下,缝隙腐蚀区域较非缝隙腐蚀区域腐蚀更严重。