舰船海水管路腐蚀状态评估技术研究

目的研究建立舰船海水管路的腐蚀状态评估指标体系及评估方法。方法通过经验选择影响舰船海水管路腐蚀状态的重要指标,并确定相应评估方法、评价标准及权重。结果选择管材腐蚀程度、阴极保护状态、电绝缘保护状态、海水流速控制状态、密封材料密封状态5项参数组成海水管路系统腐蚀状态评估指标体系。结论可选用层次-模糊法对海水管路腐蚀状态进行评估,其中层次分析法(AHP)用来确定评价指标权重,模糊综合评判法用来处理评价指标值。     

加速腐蚀当量加速关系研究方法综述

为了进一步研究当量加速关系,归纳了现有腐蚀损伤当量化的研究方法,详细介绍了基于电化学原理、物理参量和力学损伤的当量折算法,讨论了各种方法的优劣和所适用范围。基于电化学原理的当量加速关系研究方法适合用于制定飞机金属结构加速试验环境谱,以物理参量为基准的当量折算法适用于建立疲劳关键部位、腐蚀关键部位的涂层及金属基体等各种加速试验环境谱的当量加速关系,力学损伤对比法适合用于结构疲劳关键部位。最后得出针对不同材料、不同部位应该采用不同的当量加速关系的结论。     

某型飞机腐蚀防护及设计改进

目的针对某型飞机的腐蚀问题开展研究,制定结构腐蚀修理和防腐改进措施。方法对外场飞机的腐蚀情况进行统计归类,对现有飞机防护体系进行梳理,分析结构腐蚀原因和防护体系的不足。在对飞机服役地区环境进行实测的基础上,编制飞机地面停放环境谱和飞机结构局部环境谱。研究制定结构防护体系设计改进措施,并通过加速腐蚀试验验证设计改进效果。结果与结构设计改进前的原始状态相比,防腐改进后的结构日历寿命提高1.6~5倍。结论飞机防护体系薄弱的情况下容易引发多种类型的腐蚀问题;系统地对飞机结构腐蚀问题进行治理,才能取得令人满意的效果。     

城市热岛效应下浅层土中混凝土的酸腐蚀试验研究

针对城市热岛效应引起城区浅层土地温场升高这一观测结果,采用室内快速模拟试验方法,对城区酸性土壤腐蚀混凝土材料的温度效应开展了试验研究.试验研究了在温度为5℃、20℃和40℃条件下,混凝土试样在酸浓度分别为0%、5%和10%的沙土介质中放置30 d、90 d后的抗压强度变化规律,并对混凝土试样在腐蚀过程中的腐蚀系数变化规...     

锈蚀钢筋混凝土圆柱抗震性能的试验研究

对不同锈蚀程度的钢筋混凝土圆柱进行低周反复试验,研究了不同轴压比下的钢筋锈蚀率对钢筋混凝土圆柱滞回曲线、骨架曲线、刚度、延性及耗能能力的影响;给出了试件累积耗能、屈服荷栽、极限荷栽、荷栽最大值和位移延性系数与钢筋锈蚀率和轴压比的关系.研究表明,随着钢筋锈蚀率和轴压比的增大,试件的滞回曲线趋于干瘪,骨架曲线下降段变陡,试...     

基于FA-BAS-ELM的海洋油气管道外腐蚀速率预测

为提高海洋油气管道外腐蚀速率预测的精度和效率,建立基于因子分析(FA)和天牛须搜索算法(BAS)的极限学习机(ELM)腐蚀速率预测模型。利用FA对影响因素数据集进行降维处理,确定预测模型的输入变量;建立ELM预测模型,并采用BAS对ELM模型的参数进行优化,避免参数取值随机性对模型预测性能的影响;以实海挂片试验为例,通过建模仿真评价模型的预测性能,并与其他模型进行对比分析。结果表明：FA-BAS-ELM预测模型的平均绝对误差(MAPE)仅为1.92%,决定系数R²高达0.994 9,相比于其他模型,该模型具有更优的预测性能。     

铬盐废水蒸发系统腐蚀突变与缓蚀工况研究

针对铬盐废水蒸发系统运行过程中的腐蚀问题,采用失重法、pH值检测、扫描电镜(SEM、EDS)和XRD等手段,模拟研究了温度、Cr3+质量浓度对20#碳钢腐蚀速率、腐蚀产物的影响,并从废水pH值和形貌分析角度探索腐蚀速率发生突变的原因.研究表明:废水Cr3+质量浓度在150～180 mg/L范围,碳钢腐蚀速率发生突增,废...     

Characterization of the toxic effects of cadmium and 3.5-dichlorophenol on nitrifying activity and mortality in biologically activated sludge systems—effect of low temperature

Background, aims, and scope  Sometimes, urban wastewaters convey a more or less significant part of toxic products from industries or the craft industry. Nitrifying activity can be affected by these substances, implying higher ammonia concentrations in the outlet effluent and contributing to toxicity for the aquatic environment. Moreover, the more stringently treated wastewater standards now require a reliable treatment for nitrogen. One of the key issues is the identification of the inhibition behavior of nitrifying bacteria facing a toxic substance. This new understanding could then finally be integrated into models in order to represent and to optimize wastewater treatment plants (WWTP) operation in cases involving ‘toxic scenarios’. Materials and methods  The toxic substances studied in this work, cadmium and 3.5-dichlorophenol (3.5-DCP), are representative of chemical substances commonly found in municipal sewage and industrial effluents and symbolize two different contaminant groups. The effects of Cd and 3.5-DCP on nitrification kinetics have been investigated using respirometry techniques. Results  IC50 values determination gives concentrations of 3.1 mg/L for 3.5-DCP and 45.8 mg/L for Cd at 21 ± 1°C. The variation to low temperature seems to have no real effect on IC50 for DCP, but induces a decrease of cadmium IC50 to 27.5 mg/L at 14°C. Finally, specific respirometric tests have been carried out in order to determine the potential effect of these toxic substances on the nitrifying decay rate b _a . No significant effect has been noticed for Cd, whereas the presence of 3.5-DCP (at IC50 concentration) induced a dramatic increase of b _a at 20°C. The same behavior has been confirmed by experiments performed in winter periods with a sludge temperature around 12°C. Discussion  The target substances have different modes of action on activity and mortality, notably due to the abilities of the contaminant to be precipitated, accumulated, or even to be progressively degraded. Studies realized at low temperature confirmed this assumption, and put in evidence the effect of temperature on toxic substances capable of being biosorbed. However, the change in the sludge sample characteristics can be pointed out as a problem in the investigation of the temperature effect on nitrification inhibition, as biosorption, bioaccumulation, and predation are directly linked to the sludge characteristics (VSS concentration, temperature) and the plant operating conditions (loading rates, sludge age, etc.). Conclusions  This work brings new understandings concerning the action mode of these specific contaminants on nitrifying bacteria and, in particular, on the role of temperature. The experiments lead to the determination of the IC50 values for both toxic substances on biological nitrification. The inhibition mechanisms of Cd and 3.5-DCP on nitrifying activity have been simply represented by a non-competitive inhibition model. Recommendations and perspectives  Other experiments carried out in a continuous lab-scale pilot plant should be done with a proper control of the operating conditions and of the sludge characteristics in order to better understand the mechanisms of nitrification inhibition for each contaminant. Finally, these first results show that toxic substances can have an effect on the growth rate but also on the decay rate, depending on the characteristics of the toxic substance and the sludge. This eventual double effect would imply different strategies of WWTP operation according to the behavior of the contaminant on the bacteria.     

Physicochemical substance properties as indicators for unreliable exposure in microplate-based bioassays

In the last years many efforts were made to transform standardized algal test protocols into low-cost microplate assays. While advantages were pointed out frequently, limitations are not systematically addressed, thus hindering a widespread utilisation. In this study a group of organic substances with a wide distribution of volatility (log K_AW from −6.53 to −2.13) and lipophilicity (log K_OW from 1.26 to 4.92) was investigated with respect to the influence of these physicochemical properties on their algal toxicity in different assays. Therefore the EC₅₀ values were determined with a microplate assay based on ISO 8692 protocol and the results were compared with those of an established algal growth inhibition test conducted in air tight glass vessels. Using the ratio of the EC₅₀ values, a clear connection between biological response and volatility as well as lipophilicity of test substances could be detected. Chemicals with a log K_OW higher than 3 or a Henry coefficient log K_AW higher than −4 were identified as less effective in the microplate assay than in the comparative assay. The loss in nominal concentration due to physicochemical properties could be shown to contribute to this using HPLC analysis. Consequently, when using microplate assay’s one should be aware that lipophilic and volatile chemicals might be underestimated in their toxicity, which could be indicated from evaluating related physicochemical properties modelled from structural information prior to an experimental investigation.     

金属材料海水腐蚀试验方法的编制及标准解读

为了使相关人员更好地理解标准,更好地完成试验,回顾了我国金属材料海水腐蚀试验方法和标准的编制历程,对金属材料海水腐蚀试验的两个现行国家标准进行了解读和比较。