Assessment of Soil Erodibility Indices for Conservation Reserve Program Lands in Southwestern Kansas Using Satellite Imagery and GIS Techniques

The soil erodibility index (EI) of Conservation Reserve Program (CRP) lands, which was the major criterion for CRP enrollment, was assessed for six counties in southwestern Kansas using USGS seamless digital elevation model data and Geographical Informational System techniques. The proportion of land areas with EI values of 8 or lower was less than 1% of the entire study area and most of the land areas (72.5%) were concentrated on EI values between 8 and 24. Although land acreage with EI values of 24 or higher decreased dramatically, the proportion of CRP lands to the other land-use types did not change much from low to high EI levels. The soil EI and physical soil characteristics of the CRP lands were compared to those of other land-use types. In general, the mean EI values of the land-use types were strongly correlated with physical soil properties, including organic matter content, clay content, available water capacity, permeability, and texture. CRP lands were compared in detail with cropland in terms of their soil characteristics to infer the pivotal cause of the land transformation. Although there was no significant statistical difference in EI between cropland and CRP soils, soil texture, soil family, and permeability were statistically different between the two. Statistical analyses of these three variables showed that CRP soils had coarser texture and higher permeability on average than cropland soils, indicating that CRP lands in the study area are drier than cropland soils. Therefore, soil moisture characteristics, not necessarily soil erosion potential, might have been the key factor for CRP enrollment in the study area.     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

0.1～3000MHz射频电磁环境时间变化规律及其与人群作息时间关系的研究

利用自动连续监测仪器对在成都市城区选定的监测点位开展了持续数日的测量,获取了测点的长时间监测数据,通过对监测数据的分析,研究了0.1~3000MHz射频电磁环境随时间变化的规律及其与人群作息时间的关系,并对电磁环境人工手动监测的适宜时间段进行了分析。     

航空器场内失事应急演练评估指标体系与评估方法研究

针对目前我国民用运输机场航空器场内失事应急救援综合演练缺乏有效评估体系的现状，通过对演练过程进行系统分析，构建航空器场内失事应急救援演练评估指标体系，涵盖消防、医疗、公安、媒体应对、运行指挥中心、地服、飞行区7个组织部门的2级指标。结合航空器场内失事救援的业务特点以及指标体系内在逻辑，设计相应的评估方法，对开展的航空器场内失事应急演练进行评估；最后，以国内2个机场的相关应急演练过程为典型示例，进行应用分析。研究结果表明:构建的演练评估指标体系及评估方法能较好地应用于实际应急演练过程，进而在演练评估结果和建议的基础上，实现应急演练的持续改进。     

Computing sustainable manufacturing index with fuzzy analytic hierarchy process

The growing industrial interest in adopting sustainability programmes has ushered in studies regarding sustainability indicators which have continually flourished in current literature. However, limited attention is given to the development of priority ranking, which is an important input for any adopting firm. This paper presents a hybrid multi-criteria approach in determining priority areas in sustainable manufacturing (SM). Using fuzzy analytic hierarchy process to address uncertainty in hierarchical decision-making, this paper determines SM priority strategies and eventually identifies even lower level strategies. The computed sustainable manufacturing index is presented at both the organizational and operational levels for a real case study of an industrial plastic manufacturing firm. This work provides a detailed and transparent hierarchical decision-making approach based on SM framework, the use of which could be valuable to practicing managers across industries in their pursuit of greater sustainability.     

Co-treatment of fruit and vegetable waste in sludge digesters. An analysis of the relationship among bio-methane generation,process stability and digestate phytotoxicity

The co-digestion of a variable amount of fruit and vegetable waste in a waste mixed sludge digester was investigated using a pilot scale apparatus. The organic loading rate (OLR) was increased from 1.46 kg VS/m³ day to 2.8 kg VS/m³ day. The hydraulic retention time was reduced from 14 days to about 10 days. Specific bio-methane production increased from about 90 NL/kg VS to the maximum value of about 430 NL/kg VS when OLR was increased from 1.46 kg VS/m³ day to 2.1 kg VS/m³ day. A higher OLR caused an excessive reduction in the hydraulic retention time, enhancing microorganism wash out. Process stability evaluated by the total volatile fatty acids concentration (mg/l) to the alkalinity buffer capacity (eq. mg/l CaCO₃) ratio (i.e. FOS/TAC) criterion was <0.1 indicating high stability for OLR <2.46 kg VS/m³ day. For higher OLR, FOS/TAC increased rapidly. Residual phytotoxicty of the digestate evaluated by the germination index (GI) (%) was quite constant for OLR < 2.46 kg VS/m³ day, which is lower than the 60% limit, indicating an acceptable toxicity level for crops. For OLR > 2.46 kg VS/m³ day, GI decreased rapidly. This corresponding trend between FOS/TAC and GI was further investigated by the definition of the GI ratio (GIR) parameter. Comparison between GIR and FOS/TAC suggests that GI could be a suitable criterion for evaluating process stability.     

Revisiting the national corporate social responsibility index

This paper relies on Gjølberg’s national corporate social responsibility (CSR) index while its purpose is twofold. First, it seeks to extend the methodological instrument for assessing national CSR and, second, it applies the new approach to a much larger pool of countries (n = 86) in an attempt to provide a global CSR outlook. The emergent picture from the study is one of deficient CSR penetration and wide variation among countries where most of the assessed countries are still lagging in the endorsement of international CSR initiatives and schemes. Findings offer fertile ground to theorists and researchers for a deeper investigation of the national specificity of CSR and to further identify institutional determinants that shape the social responsiveness and self-regulation of business entities. The study has also implications for managers and top executives to consider as it infers that the national background can be influential in the development of a CSR agenda and can condition the level of CSR penetration.     

Review of LCA studies of solid waste management systems – Part II: Methodological guidance for a better practice

Life cycle assessment (LCA) is increasingly used in waste management to identify strategies that prevent or minimise negative impacts on ecosystems, human health or natural resources. However, the quality of the provided support to decision- and policy-makers is strongly dependent on a proper conduct of the LCA. How has LCA been applied until now? Are there any inconsistencies in the past practice? To answer these questions, we draw on a critical review of 222 published LCA studies of solid waste management systems. We analyse the past practice against the ISO standard requirements and the ILCD Handbook guidelines for each major step within the goal definition, scope definition, inventory analysis, impact assessment, and interpretation phases of the methodology. Results show that malpractices exist in several aspects of the LCA with large differences across studies. Examples are a frequent neglect of the goal definition, a frequent lack of transparency and precision in the definition of the scope of the study, e.g. an unclear delimitation of the system boundaries, a truncated impact coverage, difficulties in capturing influential local specificities such as representative waste compositions into the inventory, and a frequent lack of essential sensitivity and uncertainty analyses. Many of these aspects are important for the reliability of the results. For each of them, we therefore provide detailed recommendations to practitioners of waste management LCAs.     

矿区植被恢复方式对土壤微生物和酶活性的影响

矿区废弃地生态退化形势严峻,生态修复已成为矿区可持续发展的主要措施,土壤微生物和酶活性可作为评价土壤恢复质量的敏感因子.本研究将以山西省安太堡煤矿复垦区作为对象,分析植被恢复方式对土壤微生物和酶活的影响.结果表明,不同植被方式对土壤理化特征、参与氮代谢的3类菌群(固氮菌、硝化细菌和反硝化细菌)和4种酶活性(蔗糖酶、过氧化氢酶、脲酶和多酚氧化酶活)均有显著影响.土壤总氮含量与固氮菌和硝化细菌数量均显著相关,而与反硝化细菌不相关.多酚氧化酶活性与有机碳和总氮含量之间为负相关,而其它3种酶与有机碳和总氮之间呈正相关.通过主成分分析计算综合肥力指标,刺槐-油松混交林土壤综合肥力指标最高,而未复垦综合肥力指标最低.可见,刺槐-油松混交林是晋西北干旱区矿区复垦较为适宜的植被恢复模式.     

汽车制造项目环境影响评价技术要点分析

本文在实际开展汽车制造项目环境影响评价的基础上,对汽车制造项目生产工艺及产污环节进行梳理,重点对废气、废水、固废、噪声源强核算过程和方法进行解析,对污染防治措施论证内容进行探讨,同时从清洁生产水平分析、政策相符性分析等方面的技术要点进行总结整理,梳理了目前汽车制造项目环评文件编制的要点核心,指出汽车整车制造项目环境影响评价中应关注的重点问题,主要在于挥发性有机废气源强和含氮、磷及重金属废水源强核算、物料平衡等,为下阶段汽车制造项目建设和环境管理提供参考。