Powered two-wheeler riders' risk of crashes associated with filtering on urban roads

Objective: The objective of this study is to estimate the crash risk per kilometer traveled by powered two-wheeler (PTW) riders filtering through traffic on urban roads.

Methods: Using the traffic injury crashes recorded by the police over a period of 3 years on 14 sections of urban roads in the city of Marseille, France, and a campaign of observations of PTWs, the crash risk per kilometer traveled by PTWs filtering was estimated and compared to the risk of PTWs that did not filter.

Results: The results show that the risk of PTW riders being involved in injury crashes while filtering is significantly higher than the risk for riders who do not filter. For the 14 sections studied, it is 3.94 times greater (95% confidence interval [CI], 2.63, 5.89). This excess risk occurred for all PTW categories. Furthermore, no space appears to be safer than the others for filtering. Riders filtering forward along the axis of the carriageway, along bus lanes, or between traffic lanes (lane-splitting) all have a crash risk greater than the risk of those who do not filter.

Conclusions: All measures limiting the practice of filtering by PTWs on urban roads would probably contribute to improving the safety of their users.     

Are you okay to drive? Commuting behavior and blood alcohol concentrations among restaurant diners

Objective: Drink driving is widely recognized as a major road safety problem. In Australia, health promotion messages encourage monitoring the number of standard drinks consumed prior to driving. This pilot research aimed to investigate commuting behavior and blood alcohol concentration (BAC) of diners, including intended drivers, at Sunshine Coast restaurants.

Methods: Five hundred and forty-four diners (n = 260 males) consented to participate in a brief interview and to use a breathalyzer device to measure their BAC.

Results: Forty percent of participants advised they don't drink and drive (34% of males, 45% of females; 67.25% of <17–20 years, 30.5% of 50–59 years), and of the remaining participants, 75% advised they count the number of their drinks (69% of males, 84% of females; 32% of <17–20 years, 82% of 50–59 years), while 10% of participants monitored their BAC by how they were feeling (12% of males, 6% of females). Thirty-seven percent of participants said it was easy/very easy to estimate their BAC (41% of males; 33% of females; 21% of <17–20 years, 43% of 50–59 years). The actual BAC was less than expected for 56% of participants, with one-third underestimating BAC and some intended drivers having an actual BAC in excess of the 0.05 limit.

Conclusions: Given the proportion of diners who reported they count the number of drinks, or use feelings as a way to gauge BAC, coupled with the considerable proportion who underestimated their BAC, a safer public health message is to avoid driving if you intend to drink. In addition, targeted intervention for experienced drivers (and, arguably, drinkers) appears warranted, as every participant aged less than 21 years who stated he or she would drive home indeed had a zero BAC. Interestingly every female driver who stated she would be driving home also had a legal BAC, suggesting gender-specific intervention.     

长输管道泄漏检测技术进展浅析

简述了长输管道泄漏检测技术的进展情况,介绍了4种泄漏检测技术原理,并对比分析了各种技术的特点和应用范围,为管道的安全运行管理和维护决策提供了技术参考。     

Evaluation of mercury speciation and removal through air pollution control devices of a 190 MW boiler

Air pollution control devices (APCDs) are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction (SCR) and wet flue gas desulfurization (FGD) systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation a ect mercury removal e ciently at coal-fired utilities. The Ontario Hydro Method (OHM) recommended by the U.S. Environmental Protection Agency (EPA) was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor a ecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury (Hg2+) and more elemental mercury (Hg0) at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation e ciency reached 71.0%. Therefore, oxidized mercury removal e ciency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%–96.8% of oxidized mercury was controlled, but only 54.9%–68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal e ciency was 95.9%–98.0%, and there was a big di erence in the total mercury removal e ciencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08.     

Behavioral pathways in bicycle-motor vehicle crashes: From contributing factors,pre-crash actions,to injury severities

Introduction: This study performed a path analysis to uncover the behavioral pathways (from contributing factors, pre-crash actions to injury severities) in bicycle-motor vehicle crashes. Method: The analysis investigated more than 7,000 bicycle-motor vehicle crashes in North Carolina between 2007 and 2014. Pre-crash actions discussed in this study are actions of cyclists and motorists prior to the event of a crash, including “bicyclist failed to yield,” “motorist failed to yield,” “bicyclist overtaking motorist,” and “motorist overtaking bicyclist.” Results: Model results show significant correlates of pre-crash actions and bicyclist injury severity. For example, young bicyclists (18 years old or younger) are 23.5% more likely to fail to yield to motor traffic prior to the event of a crash than elder bicyclists. The “bicyclist failed to yield” action is associated with increased bicyclist injury severity than other actions, as this behavior is associated with an increase of 5.88 percentage points in probability of a bicyclist being at least evidently injured. The path analysis can highlight contributing factors related to risky pre-crash actions that lead to severe injuries. For example, bicyclists traveling on regular vehicle travel lanes are found to be more likely to involve the “bicyclist failed to yield” action, which resulted in a total 44.38% (7.04% direct effect + 37.34% indirect effect) higher likelihood of evident or severe injuries. The path analysis can also identify factors (e.g., intersection) that are not directly but indirectly correlated with injury severity through pre-crash actions. Practical Applications: This study offers a methodological framework to quantify the behavioral pathways in bicycle-motor vehicle crashes. The findings are useful for cycling safety improvements from the perspective of bicyclist behavior, such as the educational program for cyclists.     

声激励锚杆轴力监测传感器的研制

根据现有的锚杆支护方式,提出一种采用声激励来监测锚杆轴力的新方法,该方法属于无损检测。阐述了锚杆轴力监测传感器的基本原理,介绍了传感器的构造及参数的设置,从强度、模态、声学3个方面进行了详细说明,分析了共振板的厚度变化对声学性能的影响。结果表明,该传感器满足设计要求,方法可行、有效。     

Seat strength in rear body block tests

Purpose: This study collected and analyzed available testing of motor vehicle seat strength in rearward loading by a body block simulating the torso of an occupant. The data were grouped by single recliner, dual recliner, and all belts to seat (ABTS) seats.

Methods: The strength of seats to rearward loading has been evaluated with body block testing from 1964 to 2008. The database of available tests includes 217 single recliner, 65 dual recliner, and 18 ABTS seats. The trends in seat strength were determined by linear regression and differences between seat types were evaluated by Student's t-test. The average peak moment and force supported by the seat was determined by decade of vehicle model year (MY).

Results: Single recliner seats were used in motor vehicles in the 1960s to 1970s. The average strength was 918 ± 224 Nm (n = 26) in the 1960s and 1,069 ± 293 Nm (n = 65) in the 1980s. There has been a gradual increase in strength over time. Dual recliner seats started to phase into vehicles in the late 1980s. By the 2000s, the average strength of single recliner seats increased to 1,501 ± 335 Nm (n = 14) and dual recliner seats to 2,302 ± 699 Nm (n = 26). Dual recliner seats are significantly stronger than single recliner seats for each decade of comparison (P < .001). The average strength of ABTS seats was 4,395 ± 1,185 in-lb for 1989–2004 MY seats (n = 18). ABTS seats are significantly stronger than single or dual recliner seats (P < .001). The trend in ABTS strength is decreasing with time and converging toward that of dual recliner seats.

Conclusions: Body block testing is an quantitative means of evaluating the strength of seats for occupant loading in rear impacts. There has been an increase in conventional seat strength over the past 50 years. By the 2000s, most seats are 1,700–3,400 Nm moment strength. However, the safety of a seat is more complex than its strength and depends on many other factors.     

航空发动机涡轮叶片热障涂层冲蚀试验装置的研制

目的通过研制热障涂层冲蚀服役环境的模拟装置,来研究冲蚀失效机制。方法通过研制模拟热障涂层高温热冲击的燃气喷枪,在喷枪中设计速度、流量可控的颗粒送料系统,同时在装置中集成裂纹演化实时检测的声发射系统。结果该系统实现了热障涂层冲蚀服役环境的模拟,温度场、裂纹演化损伤参量的同步采集、输出与显示,从而完成了冲蚀服役环境模拟与关键损伤参量实时检测的一体化设计。结论装置能完成热障涂层常温、高温等各种服役温度、各种冲蚀角度、各种冲蚀速度等条件下的模拟试验,并提供较为系统的损伤参量检测数据,为理解热障涂层的冲蚀机理、优化其设计制备提供有效的试验数据。     

儿童在道路行驶中的安全与防护——加拿大新的儿童汽车座椅法规与测试方法

本文主要介绍加拿大新的《机动车辆约束系统和加高座椅安全法规》（SOR/2011-16）的相关内容,同时对儿童汽车座椅的研究与测试方法也进行了详细描述,以对我国相关行业提供借鉴。