南水北调中线工程总干渠沿线经过河流水质评价

选取南水北调中线总干渠工程沿线的19条河流,对其水环境特征进行了为期1年的动态监测。利用单因子污染指数评价每条河流的污染因子和污染源类型,在此基础上,由综合污染指数评价得知,河南的赵河、贾鲁河、河北的孟良河,北京的琉璃河水质为Ⅳ类中度污染;河南的卫河、河北的洨河、天津的北运河水质为Ⅴ类重度污染,天津的独流碱河水质为劣Ⅴ类严重污染。评价Ⅳ类、Ⅴ类、劣Ⅴ类河流水质指标污染分担率确定污染水体主要污染物及其来源。总体来看,水质沿工程总干渠由南到北逐渐恶化,污染类型也由农业型转向工业型。研究结果可为中线工程的水资源合理配置与沿线河流污染的有效控制提供科学依据.     

嫩江水污染物排放总量分配方法研究

本文针对嫩江沿岸采用氧化塘处理污水的特点，为充分合理利用水环境容量，以流域总量控制的原则为指导，建立了水污染物总量分配模型，预测不同流量和不同排污情况下的水质，确定不同流量下给定水质目标的临界距离和允许排污量。     

江苏淮河流域工业点源负荷空间分布特征研究

搞清流域工业点源的空间分异特征,可为水环境整治与工业规划提供参考依据。采用工业污染源普查数据建立污染源信息数据库,在GIS技术、密度分析法与ESDA方法支撑下,探析江苏淮河流域工业点源与工业污染负荷空间格局与特征。结果显示：工业点源集聚于城市、县城及专业乡镇,污染行业地域分异现象显著,其中,河流、港口及临湖地区成为高负荷工业点源集聚地区,化工、造纸、化纤与医药等行业的工业集中于临海、临河及临湖地区,饮料制造业、副食品加工业点源集中于工业化水平较低的北部流域的少数乡镇,工业氨氮多数来自化工业。在不同工业化水平下,工业污染负荷空间差异大,南部流域负荷整体水平高于北部,北部流域高负荷区分布于少数乡镇与城区     

环境审计制度选择影响因素的实证分析

随着环境问题的日益严重,污染治理工具的选择和实施成为社会各界普遍关注的焦点.本文选择150个国家的国别数据,采取logit模型对环境审计制度选择的影响因素进行分析.研究结果表明,经济发展水平、环境保护投资和社会信息化程度与一国是否开展环境审计成显著正相关;审计体制对环境审计的开展也具有显著性影响;而污染排放现状、邻国的决策对环境审计制度选择的影响并不显著.本文的研究表明,与传统命令——控制型规制工具的普适性不同,作为一种信息化的污染治理工具,环境审计是经济社会发展到一定阶段国家最高审计机关的选择.进一步,利用我国2007年-2011年的相关数据进行基于主成分回归的符合性检验,结果显示环境审计的概率值p皆高于50％,且逐年递增,表明我国现阶段实施环境审计的条件和时机已经基本成熟.本文的研究发现为我国最高审计机关“十二五”期间将环境审计作为一种独立的审计类型,在全国推行环境审计工作提供了理论依据.     

风蚀扬尘抑尘剂效率测试方法与应用

风蚀扬尘抑尘剂是一种控制风蚀扬尘的有效措施,探讨使用便携式风洞(PI-SWERL)测试风蚀扬尘抑尘剂效率的方法,并对比国内外2种抑尘剂对风蚀扬尘PM2. 5的抑制效率,以研究喷洒方式、稀释倍数和风速对抑尘效率的影响.结果表明:①按照推荐的稀释倍数分别配置G和Enviroseal(ES)抑尘剂水溶液并测试,液滴喷洒方式对应的抑尘效率优于雾化喷洒方式,在17. 2 m·s~(-1)(相当于8级风)风速时G抑尘剂效率(99. 5%)优于ES抑尘剂(94. 0%)和水(77. 5%);②对稀释倍数为50、100、150、200和400倍的G抑尘剂进行测试,在17. 2 m·s~(-1)风速时,抑尘效率分别为99. 7%、99. 5%、99. 7%、98. 1%和95. 9%,可根据抑尘效率变化拐点确定抑尘剂最佳成本效益稀释倍数;在13. 1～17. 2 m·s~(-1)风速范围内,抑尘效率随风速增加而增加.③使用便携式风洞测试风蚀扬尘抑尘剂效率的方法,可以量化抑尘剂对风蚀扬尘PM2. 5的抑制效率,建议对风蚀扬尘抑尘剂开展抑尘有效期和环境友好性测试.     

Minimizing external indirect health costs due to aerosol population exposure: a case study from Northern Italy

Environmental Agencies require Decision Support Systems, in order to plan Air Quality Policies considering the cost of emission reduction measures and the human health effects (with related social costs). The use of Decision Support Systems is also useful to spread information to general public, explaining the effectiveness of proposed air quality plans. In this paper, a multi-objective approach to control PM10 concentration at a regional level is presented. The problem considers both the internal costs (due to the implementation of emission reduction measures) and the external costs (due to population exposure to high PM10 concentrations). To model PM10 concentrations, a single surrogate model is used for the entire domain, allowing the implementation of a very efficient optimization procedure. The surrogate model is derived through a set of 10 simulations, performed using a Chemistry Transport Model fed with different emission reduction scenarios. The methodology is applied to Northern Italy, a region affected by very high PM10 concentrations that exceed the limit values specified by the EU legislation.     

General vs. domain specific recycling behaviour—Applying a multilevel comprehensive action determination model to recycling in Norwegian student homes

This paper reports the results of a multilevel structure equation model predicting general and fraction specific self-reported recycling behaviour. The model was tested on a sample of 697 undergraduate students from four Norwegian universities who each reported their degree of participation in the local recycling schemes for paper/cardboard, glass, metal, and plastic. It was demonstrated that variance in recycling behaviour can be divided into a smaller general part that is relatively stable across waste fractions and a specific part that depends on the respective fraction. General recycling behaviour is well predicted by intentions to recycle and recycling habits, whereas perceived behavioural control is to a large extend fraction specific and influences the fraction specific recycling. Perceived behavioural control mediates the influence of the recycling scheme type, distance to recycling containers, and transport mode used to reach the recycling containers.     

Formulation of criteria for pollution control on cement products produced from solid wastes in China

The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated.     

中国农业污染防控的制度约束研究

中国作为世界上最大的发展中国家,正经历着越发严重的农业污染问题;对农业污染防控的制度性约束因素进行深入分析,是实现有效污染防控的前提,具有积极的理论和现实意义。对中国农业污染防控的制度约束分析研究表明：农业污染及其防控涉及的利益主体关系及相关制度设计,对各利益主体形成了污染防控负激励,加重了农业污染;城乡＂二元＂结构及其衍生的一系列体制问题,导致＂三农＂在农业环境治理、农村公共物品提供等方面被严重边缘化,进而直接制约了农业污染防控;此外,高度分散的小规模农户经营模式也不利于农业污染防控。最后,针对中国农业污染防控的制度性约束因素,提出了有针对性的农业污染防控政策建议。     

四川省农村环境空气污染源分布及其对自动监测点位设置影响的研究

将四川省农村地区分成平原和浅丘区、小起伏山地和高丘区、高山峡谷区三种类型区域。利用GIS软件,将四川省划分网格,分别统计每个网格中的工业废气污染点源数量和主要交通线路长度,得出四川省工业废气污染点源密度分级图和四川省主要公路密度分布图,以及结合农村污染面源的情况分析,总结出农村区域的主要污染密度分布类型。结果表明,在一定区域范围内,农村平原和浅丘区的工业源、交通源、农村面源分布均匀;高丘区、小起伏山区、高山峡谷区的污染源分布均具有明显的地理分布特性,山间平地和山谷台地的污染源分布密度高;根据四川省污染源分布规律给农村空气自动监测布点提供了指导。