A voltammetric screening method to determine ronidazole in bovine meat

Abstract

An original voltammetric screening method, employing glassy carbon electrode (GCE) with the differential-pulse voltammetry technique (DPV), has been developed to determine residues of the anti-parasitic agent Ronidazole (RNZ) in bovine meat. By using cyclic voltammetry (CV), it has been demonstrated that an irreversible cathodic process occurs at approximately ?0.740?V (vs. Ag|AgCl, KCl 3?mol L^?1) in a 0.100?mol L^?1 phosphate buffer at pH 6.5 as supporting electrolyte. Furthermore, the behavior of RNZ in CV indicates the occurrence of a diffusion mass transfer process to the working electrode surface. The RNZ reduction mechanism was proposed as a 6-electron transfer, similar to Metronidazole under the same pH range. Quantification of RNZ and method validation were then carried out by DPV. The relative standard deviation (RSD) were 3.21% for intraday precision of 10 consecutive repetitions and 6.78% for interday precision after five analysis. Limits of detection and quantification were also obtained, and the values were 0.107 and 0.358?mg kg^?1, respectively. The recovery percentage for three different concentrations of RNZ in the bovine meat matrix ranged between 98.1% and 100.3%. The method proved to be efficient for screening RNZ in bovine meat.     

高速气流法低温固相合成聚苯胺类聚合物研究

聚苯胺和聚2,5-二甲氧基苯胺具有很好的电化学性能、光学性能等,广泛应用于电致变色显示器、化学传感器、抗静电涂层及太阳能电池等领域。不同于传统的机械化学合成法,首次应用高速气流法低温固相合成了聚苯胺和聚2,5-二甲氧基苯胺,同时用X射线衍射(XRD)、傅里叶红外光谱(FT-IR)、热重分析(TG)、紫外可见吸收光谱(UV-Vis)对两种聚合物进行了表征;此外,测试了两种聚合物的循环伏安特性,结果表明,两者均具有较好的电化学性能。相比于传统的机械化学合成法,高速气流法低温固相合成能够高效快速、连续循环制备聚苯胺类化合物,而且此方法具有操作简便、高效率、低能耗、安全性好和绿色环保等优点,可应用于诸多领域。     

Pd-Ni/GC电极电化学还原水中三氯甲烷的研究

通过电沉积法在玻碳板(GC)电极上负载钯镍双金属,并利用正交实验对其进行循环伏安(CV)研究. CV结果表明,钯镍双金属比钯、镍单金属具有更大的氢吸附峰值,可以在- 500 mV(以Hg/Hg2SO4 为参比电极)左右获得- 24.83 mA的氢吸附峰.扫描电镜分析(SEM)表明,镍的加入改变了钯颗粒在GC表面的分布形态,钯镍双金属颗粒形貌明显不同于钯、镍单金属颗粒,钯镍双金属颗粒粒径介于钯、镍单金属颗粒粒径之间.实验考察了脱氯电流、脱氯时间对三氯甲烷去除率的影响.三氯甲烷的去除率随脱氯电流的增大而增大,随脱氯时间的延长而提高.在优化条件下制备的Pd-Ni/GC电极在0.5 mA、180 min的脱氯条件下对三氯甲烷的去除率为42.53%.可以推测,随着脱氯时间的继续延长,三氯甲烷去除率可得到进一步提高.     

7A52铝合金干湿交替情况下电偶腐蚀行为研究

目的研究海洋环境下7A52铝合金在干湿周浸使用过程中的电偶腐蚀现象。方法实验配制3.5%的Na Cl水溶液浸泡试样,实验周期为504 h,全浸试样作为对比试样,在实验周期内一直浸泡在Na Cl水溶液中。测试试样干湿周浸情况下7A52与5A06,38Cr Si之间的电偶电流及电偶电压,使用SEM分析腐蚀后的表面形貌。结果 7A52-5A06干湿周浸试样电偶电流变化不大,全浸试样电偶电流较初期变化较大,后期电偶电流的大小只有初期电偶电流大小的1/8左右,7A52-38Cr Si全浸试样与干湿交替情况下电偶电流基本相同。随着试验的进行,干湿交替及全浸情况下电偶电流的差异逐渐变大,电偶电流增大约为实验初期的10倍;全浸情况下试样表面腐蚀产物较致密,干湿周浸情况下腐蚀产物较为疏松。结论在3.5%的Na Cl水溶液干湿周浸情况下,7A52-5A06,7A52-38Cr Si的平均电偶腐蚀速度要大于全浸状态下的平均电偶腐蚀速度,干湿周浸情况下,7A52-5A06,7A52-38Cr Si腐蚀后试样表面形态具有较大差异,5A06在相同实验条件下的耐腐蚀性要好于7A52。     

某些剧毒有机废料在高温至超临界水中的处理实验

为了探索毒害有机废料的处理条件和反应机制,用二氨基乙二肟,氨基氰和蜜胺作初始试料,在温度１５０－４００℃,压力１００－７００×１０＾５Ｐａ的条件下进行了水热实验研究,部分密胺实验还添加了Ｈ２Ｏ２,实验结构表明,在水热条件下,尤其在超临界水中,二氨基乙二肟和氨基氰既可以通过热解作用而聚合成较高分子量的氮杂环混合物,进而水解转化成ＣＯ２和ＮＨ３,也可以直接发生水解作用,生成ＣＯ２和ＮＨ３,添加氧化剂可     

摩擦摆隔震支座理论分析与数值模拟研究

介绍了摩擦摆隔震支座的基本构成和隔震原理.利用力学平衡原理,对摩擦摆隔震支座进行了理论分析,推导了摩擦摆隔震支座的刚度和等效粘滞阻尼比,构造了摩擦摆隔震支座的滞回模型,并探讨了该支座的自回复能力,得到了其最大残余位移计算公式.采用有限元软件ABAQUS,对摩擦摆隔震支座进行实体单元建模,模拟低周反复荷载作用下,该支座的...     

Influence of phytoplankton on complexing capacity of seawater†

Differential Pulse Anodic Stripping Voltammetry (DPASV) was employed to measure Apparent Copper Complexing Capacity (L_t) and Stability Constants (K_s) of related cupric complexes of cell exudates of the phytoplanktonic alga Dunaliella salina. Three natural seawater samples collected 0.1, 2, 5 miles off the Tyrrhenian coast were used as culture medium. The measurements were carried out 1h and 7 days after the inoculum. Furthermore, on one culture the medium was passed through C₁₈‐SEP‐PAK cartridges in order to separate the cell exudates. The results show that Dunaliella salina influences the value of L_t but does not affect the value of K_s . The C₁₈SEP‐PAK retain only 50% of the ligands produced by the cells and capable of complexing copper.     

Tessaria absinthioides: a possible bio‐monitor for Cd,Pb, and Cu,in the middle and lower basin of the loa river,North Chile

Some ecotoxic metals such as Cd, Pb, and Cu in Tessaria absinthioides were quantified to study its possible use as a bio‐indicator and/or bio‐monitor of these metals. This plant was chosen for its abundance in the area under study, along Chile and even in southern Latin America. For Cd, Pb, and Cu in all three parts of the plant (leaves, stems and roots) a different concentration pattern in each sampling areas was observed. In sampling areas Coya Sur and La Cascada copper and cadmium concentration decrease in order: leaves > roots > stems. In samples collected in Xalquincha the lowest concentrations of Cd and Pb were observed in stems. A maximum of cadmium concentration (9ug/gd.w. in leaves) was found in samples from La Cascada, a inflow to river Loa in Calama. High concentrations of lead were found in roots and leaves. Collected data demonstrate that the main pathway for cadmium is from ground water via roots into the plant. Some data obtained for lead and copper indicate that the influence of dust particles adsorbed on leaves and stems can be higher than uptake from ground water.     

循环载荷下煤样渗透特性试验研究

以原煤煤样为研究对象,采用自主研发的三轴应力渗流实验系统,进行等幅循环加、卸载的渗透率测试,研究煤样疲劳损伤过程中渗透率对应力水平的响应特征。结果表明:上、下限应力点处渗透率随循环次数出现降低-稳定-升高3个阶段,整体呈“U”型,并且随着上限应力水平的升高,曲线有向“V”型发展的趋势。拟合结果显示:在渗透率降低阶段,渗透率与循环次数呈幂指数函数关系;在渗透率升高阶段,渗透率与循环次数呈指数函数关系,并且渗透率随循环次数的降低和升高速率与上限应力水平正相关。     

钙基CO_2吸收剂循环特性影响因素分析

利用小型固定床反应器研究了循环煅烧/碳酸化过程中,煅烧温度、煅烧气氛、碳酸化温度、压力等对钙基CO2吸收剂循环特性的影响,确定了影响钙基CO2吸收剂循环特性的主要因素。结果表明:随循环次数的增加,吸收剂的转化率明显下降,循环10次后,其基本都下降到20%左右;煅烧温度是影响吸收剂循环特性最重要的因素;煅烧气氛中存在CO2对吸收剂活性保持不利;吸收压力和温度也对吸收剂的循环特性有一定影响,较高的吸收压力和吸收温度有利于吸收剂转化。