不同工况条件混合赤泥力学特性变化规律

在利用常规土工实验和XRF、XRD、SEM等微观测试手段分析了刚出厂混合赤泥化学成分、矿物组成、微观结构的基础上,通过无侧限抗压强度实验和固结排水三轴剪切实验对自然风干、浸水饱和、非饱和-饱和干湿循环3种工况条件下混合赤泥不同龄期力学特性的变化规律进行了研究。结果表明,自然风干试样的无侧限抗压强度和粘聚力要明显大于相同龄期浸水饱和试样和干湿循环试样,说明混合赤泥的强度形成与滤水过程有一定联系,且其强度的增长均主要集中在脱水龄期前70天内;混合赤泥在3种不同工况条件下无侧限抗压强度和粘聚力均有一定程度的增长,说明混合赤泥可在浸水环境下生成不可逆增长的具有水硬性的胶结矿物,使其在水环境中不发生崩解,可保证混合赤泥堆体在自然堆存过程中其力学特性满足安全堆载要求。     

曝气条件对浸没式膜生物反应器内流场的影响

为深入研究流场动力学特性对浸没式膜生物反应器系统内膜面污染的控制,应用fluent软件对浸没式膜生物反应器内气液两相流动进行了三维数值模拟研究。采用标准k-ε湍流模型和欧拉多相流模型,考察了改变曝气条件对膜面气液速度场及气含率分布的影响。模拟结果表明,在相同曝气强度下,1 mm曝气孔径下膜面气液两相的速度增加较孔径2 mm、3 mm的快;曝气孔径为1 mm时,膜面的液相速度随着曝气强度的增加逐渐增大;曝气孔径为1 mm时,曝气量为5.5 m3/h所形成的漩涡区较大,膜面气含率值较高且分布较均匀,气液两相接触面积较大,膜面冲刷效果较好;模拟观察到反应器底部靠近壁面局部气含率较低,不利于活性污泥中微生物的生长,需要进一步优化曝气和反应器结构。     

SCR脱硝系统烟道内流场优化

为了改善选择性催化还原法(SCR)催化剂上游烟气的流场、温度场和浓度场分布,基于CFD仿真分析技术,建立了整个脱硝系统三维模型,并通过优化导流板及整流格栅,使得速度标准偏差、浓度标准偏差、温度偏差、速度偏转角以及压降等性能指标都满足设计要求,在满足脱硝效率和氨逃逸率前提下,大大降低了烟气对催化剂层的冲刷,保证催化剂的使用寿命。最后,为了合理布置吹灰器,对优化结构下粉尘颗粒在烟道内的运动情况进行了仿真分析研究,为设计提供了依据。     

一种毒气事故避难所效果评估方法

目前我国针对公众防护只有疏散这一单一方法,现实情况下往往疏散不利导致大量人员伤亡,而同时避难策略由于缺乏理论和评估依据,往往难以推广。为了更好的全面保障毒气泄漏事故周边居民的生命安全,提出一套避难场所的效果评估方法。该方法主要包括房屋气密性测试、屋外浓度场计算、屋内浓度场计算分析、屋内致死概率分析。并举出实际应用案例,展现该方法的多种数据支撑作用。最终给出该方法对于制定避难策略过程中关键影响因素。该方法的提出为高含硫气田、化工园区周边公众防护策略的实施,提高其周边居民安全具有重要意义。     

交通事故现场物证点线系列直角坐标测绘定位方法

为了研究满足交通事故现场记录图的技术性、证据性要求的交通事故现场测绘方 法,针对现有现场图定位方法的不足,重点从交通事故证据审查的视角,提出物证定位 观点,分析其技术构成并构建内容体系;在此基础上,依据技术标准基本要求,运用平面 坐标定位原理,以交通事故现场物证定位思想为基础,研究开发交通事故现场点线系列 直角坐标测绘定位方法及其具体应用技术。研究表明:物证定位是能够将现场元素定位 和现场道路定位协同考虑的一种交通事故现场物证固定技术,以其基本思想与原理可以 开发交通事故现场点线系列直角坐标测绘定位方法;该方法有多种变换方法可适用不同 情况的交通事故现场测绘;应用该方法绘制的现场记录图,可以满足现场记录图技术性 及证据性的双重要求。     

土地资源的多级网格数据结构建立与应用研究

传统的基于行政区的土地统计数据不能完全表现区域内部土地利用的空间分异特征,以武汉市为实验区,对基于网格的统计信息算法STING(Statistical Information Grid-based method)进行扩展,以景观多样性指数为定量化指标对实验区进行四叉树划分生成不均匀多级网格,建立一种拟合了行政区划界线的不均匀的多级网格结构来存储、管理和分析土地数据。并以此多级网格数据结构为平台计算和生成实验区人口密度空间分异渲染图,初步抽取了人口分布与土地利用之间的关系。实验表明,基于多级网格的统计方法能更好地表达土地利用及其相关数据的空间分异性,利于对土地资源数据的进一步挖掘以抽取所需知识。     

龙首矿采场通风方案的研究

简介了龙首矿井的通风系统,通过十年的通风实践和调整,实现了机械化采场通风方案,同时,研讨了下向胶结充填采矿法采场的通风机理,并给以论证。     

Estimation of Cumulative Frequency Distribution for Carbon Monoxide Concentration from Wind-Speed Data, in Buenos Aires (Argentina)

In this article we apply and test a methodology to estimate cumulative frequency distribution for air pollutant concentration from wind-speed data. We use the inverse relationship after Simpson et al. (Atmospheric Environment, 19, 75–82, 1985) between the opposing percentile values in the statistical distributions for air pollutant concentrations and wind-speed data. This relationship is valid, irrespective of the statistical distributions of both variables, if an inverse relationship between them is also applicable. The available data are five years of 8-h average carbon monoxide concentration and 8-h mean wind-speed, observed in Buenos Aires (Argentina). The performance of the obtained empirical expressions in estimating cumulative frequency distributions for 8-h CO is statistically evaluated. The results show that it is possible to obtain an acceptable cumulative frequency distribution for 8-h CO concentration at the site if the cumulative frequency distribution for wind-speed is known. Q–Q plots show a good agreement between estimated and observed values. From our data, the mean relative error of the estimations was found to be as much as 8.0%.     

ENHANCEMENTS OF NONPOINT SOURCE MONITORING OF VOLATILE ORGANIC COMPOUNDS IN GROUND WATER1

ABSTRACT: The U.S. Geological Survey (USGS) has compiled a national retrospective data set of analyses of volatile organic compounds (VOCs) in ground water of the United States. The data are from Federal, State, and local nonpoint‐source monitoring programs, collected between 1985–95. This data set is being used to augment data collected by the USGS National Water‐Quality Assessment (NAWQA) Program to ascertain the occurrence of VOCs in ground water nationwide. Eleven attributes of the retrospective data set were evaluated to determine the suitability of the data to augment NAWQA data in answering occurrence questions of varying complexity. These 11 attributes are the VOC analyte list and the associated reporting levels for each VOC, well type, well‐casing material, type of openings in the interval (screened interval or open hole), well depth, depth to the top and bottom of the open interval(s), depth to water level in the well, aquifer type (confined or unconfined), and aquifer lithology. VOCs frequently analyzed included solvents, industrial reagents, and refrigerants, but other VOCs of current interest were not frequently analyzed. About 70 percent of the sampled wells have the type of well documented in the data set, and about 74 percent have well depth documented. However, the data set generally lacks documentation of other characteristics, such as well‐casing material, information about the screened or open interval(s), depth to water level in the well, and aquifer type and lithology. For example, only about 20 percent of the wells include information on depth to water level in the well and only about 14 percent of the wells include information about aquifer type. The three most important enhancements to VOC data collected in nonpoint‐source monitoring programs for use in a national assessment of VOC occurrence in ground water would be an expanded VOC analyte list, recording the reporting level for each analyte for every analysis, and recording key ancillary information about each well. These enhancements would greatly increase the usefulness of VOC data in addressing complex occurrence questions, such as those that seek to explain the reasons for VOC occurrence and nonoccurrence in ground water of the United States.     

水力旋流除砂器处理油田采出砂技术

我国部分油田原油生产出砂严重，经常造成集输处理系统的严重磨损和堵塞，储油罐严重积砂，不能实现密闭。储油罐清砂完全靠人工完成，劳动强度大，而且造成环境污染。在海上平台，若采出砂含油量不达标排入海洋，则会给海洋带来严重的污染，因此，采出砂处理是急待解决的问题。文章根据国内外采出砂处理技术调研，介绍了水力旋流器除砂技术原理及工艺和在国外应用实例以及该技术在我国油田的开发应用情况。