Nestling provisioning in polygynous great reed warblers (Acrocephalus arundinaceus): do males bring larger prey to compensate for fewer nest visits?

Most studies of social polygyny in birds have examined male provisioning on the basis of the number of feeding visits. This may be misleading if males compensate for infrequent visits by bringing larger prey at each visit. We investigated nestling provisioning in the socially polygynous great reed warbler, Acrocephalus arundinaceus, in south Central Sweden in 1996–1997. We collected data on rate of feeding visits, prey size and the amount of biomass delivered by males and females. Males had lower rates of feeding visits and provided smaller prey to nestlings in secondary than in monogamous and primary nests. Secondary females had higher rates of feeding visits and brought larger prey than monogamous and primary females. These results confirm that secondary females face a potential cost of polygyny through a lower rate of male feeding, and that this cost was reinforced by the significantly lower male provisioning rate (biomass h^–1) at secondary nests. Secondary females compensated for the lack of male assistance by increasing their rate of feeding and bringing larger prey. As a result, offspring in nests of secondary females received as much food as did those in nests of primary females. Prey load size increased with the parent’s proportion of feeding visits, suggesting that parents use different feeding strategies depending on their amount of responsibility for nestling provisioning. We suggest that parents which take the main responsibility for nestling feeding have to forage further away from the nest, and based on optimal-foraging theory, they should then on average bring larger prey to their nest. Received: 4 April 1999 / Received in revised form: 12 October 1999 / Accepted: 23 October 1999     

优质稻的穗肥施用技术研究

优质稻田间穗肥试验表明,在叶色转赤的基础上,施穗肥一般以复合肥112.5~150.0 kg/hm2加氯化钾37.5 kg/km2为宜; 施穗肥比不施穗肥增产10.7%~15.5%。施穗肥的效果还与肥料中的氮钾比例有关,N∶K2O以1∶0.7~1.0较适宜。     

Application of a “closed-can” technique for measuring radon exhalation from mine samples of Punjab, Pakistan

Using the closed-can technique, radon exhalation rate measurements have been carried out for shale and coal samples collected from various mines located in the Chakwal and Makarwal areas of Pakistan. For the two areas, the measured average values of the exhalation rates from shale are 1.45±0.13 and 0.67±0.25 Bq m⁻² h⁻¹ and for coal are 1.0±0.03 and 0.65±0.32 Bq m⁻² h⁻¹, respectively. These values are much lower than the measured exhalation rates from alum-shale-based Nordic concrete which has values in the 50–200 Bq m⁻² h⁻¹ range. The lower values of the measured exhalation rates from the shale and coal deposits in the Chakwal and Makarwal areas are indicative of their lower uranium contents and mine workers in these areas do not face any abnormal health hazard due to radon since the exhalation rates have been found to be on the low side.     

A study on the factor market distortion and the carbon emission scale effect of two-way FDI

Based on the data of 30 Chinese provinces for the period from 2004 to 2015, this paper expounds the carbon emissions effect of two-way foreign direct investment (FDI) from the perspective of scale effect and factor market distortions. This study uses Kaya identity to decompose carbon emission and construct simultaneous equations model to empirically examine the factor market distortion and the carbon emission scale effect of two-way FDI. The results show that the inward foreign direct investment (IFDI) increase regional carbon emission through scale effect and also exacerbates factor market distortion in China, whereas the outward FDI trends reduce carbon emission and reduces factor market distortions in China. The study also shows that human capital, research and development (R&D), trade openness, and capital accumulation are important determinants of two-way FDI. Therefore, the study proposes that IFDI policies should focus on acquiring green technologies. In addition, the domestic enterprises should be encouraged to participate in global business.     

Income and distance-decay effects on willingness to pay estimated by the contingent valuation method

This study suggests a methodology for enhancing accuracy in evaluating amenity by the contingent valuation method when household's willingness to pay (WTP) is dependent to its income and the distance between a respondent's residence and the location of a target facility. Using a linear city model, this study demonstrates the influences of income and distance-decay effects on WTP. Simulations are performed to check the validity of the model, as well as to predict consequences when income and distance-decay effects are not properly treated. Finally, the suggested methodology is applied to two real cases. The estimation results from a structural model show that the calculated total benefit varies largely when income and distance-decay effects exist and are ignored. Also, an ad hoc model generates significantly different estimates from the utility difference model this study adopted. The difference in estimates suggests that the total benefit has to be estimated by a structural model.     

Analysis of uncertainty consideration in environmental assessment: an empirical study of Canadian EA practice

Identifying and communicating uncertainty is core to effective environmental assessment (EA). This study evaluates the extent to which uncertainties are considered and addressed in Canadian EA practice. We reviewed the environmental protection plans, follow-up programs, and panel reports (where applicable) of 12 EAs between 1995 and 2012. The types of uncertainties and levels of disclosure varied greatly. When uncertainties were acknowledged, practitioners adopted five different approaches to address them. However, uncertainties were never discussed or addressed in depth. We found a lack of suitable terminology and consistency in how uncertainties are disclosed, reflecting the need for explicit guidance, and we present recommendations for improvement. Canadian Environmental Impact Statements are not as transparent with respect to uncertainties as they should be, and uncertainties in EA need to be better considered and communicated.     

石化装置安全仪表系统KooN表决结构的误跳车率定量分析

为了更准确量化安全仪表系统的误跳车率,基于联锁回路SIF中传感器、逻辑解算器、执行机构引发误跳车的不同失效机理和模型,考虑共因失效对误跳车率的影响,提出1种更符合实际并适用于异型KooN结构的新子系统误跳车率计算模型（STR of Non-identical Redundant System,SNRS）。针对SIF回路的误跳车率计算,建立了1种分析安全联锁SIF回路误跳车率（Reliability based Spurious Trip,RST）的计算框架。研究结果表明:以某聚丙烯装置第三反应器保护系统为例,将SNRS和RST方法与目前主流的多种计算方法进行数值计算对比,验证了方法的有效性,能够有效进行定量分析。     

基于尾涡强度的无人机与民机纵向安全间隔评估研究

为了解决无人机频频入侵机场净空,与民航客机发生危险接近的问题,以碰撞风险为量化指标,对无人机与民机需要保持的纵向安全间隔进行评估研究。分析民机尾涡流场对无人机运行的影响,利用Crow近场涡强度消散理论,得到实际尾迹影响区改进Reich碰撞模板,据此建立CNS/GPS性能环境下的纵向间隔评估模型,通过Matlab进行间隔值求解。研究结果表明:模型可以较为准确地反映民机起飞初始爬升阶段无人机尾随运行时导航性能和尾涡迹对所需最小间隔值的影响,并得到给定安全目标水平的计算结果。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.