化学发光法和DOAS测定NOx的对比研究

分析了化学发光法和差分吸收光谱法(DOAS)测定环境中氮氧化物的原理及相应分析仪器的系统结构,指出了化学发光法氮氧化物分析仪的技术瓶颈及差分吸收光谱法的难点和关键技术。并对两种方法的优缺点及发展趋势进行分析。实验表明,化学发光法与差分吸收光谱法测定的结果具有很好的相关性。     

A comparison of numerical solutions of partial differential equations with probabilistic and possibilistic parameters for the quantification of uncertainty in subsurface solute transport

Traditionally, uncertainty in parameters are represented as probabilistic distributions and incorporated into groundwater flow and contaminant transport models. With the advent of newer uncertainty theories, it is now understood that stochastic methods cannot properly represent non random uncertainties. In the groundwater flow and contaminant transport equations, uncertainty in some parameters may be random, whereas those of others may be non random. The objective of this paper is to develop a fuzzy-stochastic partial differential equation (FSPDE) model to simulate conditions where both random and non random uncertainties are involved in groundwater flow and solute transport. Three potential solution techniques namely, (a) transforming a probability distribution to a possibility distribution (Method I) then a FSPDE becomes a fuzzy partial differential equation (FPDE), (b) transforming a possibility distribution to a probability distribution (Method II) and then a FSPDE becomes a stochastic partial differential equation (SPDE), and (c) the combination of Monte Carlo methods and FPDE solution techniques (Method III) are proposed and compared. The effects of these three methods on the predictive results are investigated by using two case studies. The results show that the predictions obtained from Method II is a specific case of that got from Method I. When an exact probabilistic result is needed, Method II is suggested. As the loss or gain of information during a probability–possibility (or vice versa) transformation cannot be quantified, their influences on the predictive results is not known. Thus, Method III should probably be preferred for risk assessments.     

活性污泥模型参数结构可识别性研究方法进展

参数估计是活性污泥模型应用的前提,可识别性研究是参数估计的第一步。本文以异养菌生长模型为例,论述了目前适用于活性污泥模型参数结构可识别性研究的几种方法,可以看出这些方法都存在着某些缺陷,因此寻求两种或多种方法的耦合方法成为以后理论研究的方向。     

基于Ansys APDL的废旧印刷电路板基板破碎分析

为解决废旧印刷电路板资源化中的粗碎问题,利用Ansys APDL模块和CATIA V5三维设计模块,运用以点代线的方法对电路板受力进行了数值模拟;并根据废旧印刷电路板破碎实验,对数值模拟结果进行验证;同时利用实验测得的数据对辊齿进行数值模拟与分析,验证辊齿在破碎过程中的可靠性。结果显示,铜和复合材料在一点的应力均大于其许用应力,判断其发生了断裂;废旧印刷电路板基板在两齿辊差速运行工况下破碎效果最好,证明以点代线方法可靠;辊齿根部的应力小于其许用应力,可靠性良好。为废旧印刷电路板的粗碎方法研究提供参考。其他差速工况(如9~18 r/min)对破碎效果的影响以及齿辊直径对产量的影响仍有待研究。     

Ultrasensitive determination of carbendazim in water and orange juice using a carbon paste electrode

A carbon paste electrode was used for the electrochemical quantification of carbendazim in water and orange juice samples. Carbendazim oxidation on the electrode surface was found to be controlled by adsorption. The novel electrochemical procedure for carbendazim quantification employed differential pulse voltammetry using a carbon paste electrode under optimal conditions. Carbendazim oxidation currents were linear at concentrations of 2.84 to 45.44 µg L^?1, with a limit of detection of 0.96 µg L^?1. The proposed method was applied to carbendazim quantification in ultrapurified water, river water, and orange juice. Recovery rates in water and orange juice samples were in the 97%–101% range, indicating that the method can be employed to determine carbendazim in these matrices, with advantages including shorter analysis time and lower cost than routine methods such as chromatography or spectroscopy. The electrode showed good reproducibility, remarkable stability, and especially good surface renewability by simple mechanical polishing. The recovery rates observed were highly concordant with those obtained for high-performance liquid chromatography, having a relative standard deviation of less than 1.3%.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at λ = 254 nm. The photolysis of (α + β: 2 + 1) endosulfan, α-endosulfan and β-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 × 10^?4 s^?1; 1 × 10^?4 s^?1; and 2 × 10^?5 s^?1, respectively, and the calculated quantum yields (φ) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 × 10^{? 3} h^{? 1} to 7.0 × 10^{? 3} h^{? 1}. The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

聚类GO术语在基因表达差异研究中的应用

针对基因功能分类体系基因本体(Gene Ontology,GO)特殊的有向无环图特点,改进传统的用单个GO术语检测基因差异表达信号的缺陷,设计出"聚类GO术语提升差异表达检测(ScaGO)"算法.通过简单的输入对照和实验组表达谱上的全部基因表达信号,来研究一些比较新的差异表达功能组,有助于进一步解释基因差异表达的生物学意义,如疾病发病机制、药物作用机理等.将ScaGO和基于单GO术语差异分析法应用到急性淋巴细胞性白血病数据集和酵母Rap1 DNA绑定突变体差异表达数据集上,结果显示,ScaGO能比基于单GO术语差异分析法发现一些新的与差异表达相关联的功能类基因,对于指导实验具有积极意义.图1表3参21