GC/MS法测定生物样品中多溴联苯醚类化合物

本研究建立了多溴联苯醚（PBDEs）生物样品分析方法,获得了优化的前处理条件、气相色谱和质谱检测条件.对定性定量方法及实验条件必须满足的要求进行了评价.通过质量控制（quality control, QC）对整个方法进行了验证.结果证明,本研究所建立的分析方法满足生物样品PBDEs测定的要求,回收率在50.5%～112.3%之间,回收率相对标准偏差在5.3%～9.9%之间,方法检测限在7.1～161.8 pg/g之间.在建立的方法基础上,测定了部分养殖和野生鱼类样品,测得的野生鳜鱼和鲫鱼以及2个养殖鲈鱼样品的结果分别为1.53、1.11、5.31和6.15 ng/g(干重),其中主要的同族体为BDE47.     

生物法处理含油钻井废水的影响因素研究

以含油钻井废水原浆为处理对象,研究了生物法处理过程中的相关影响因素.实验结果表明,氮、磷源是影响钻井废水中石油烃降解的重要因素,最佳氮、磷源及其加入量分别为(NH4)2SO4100 mg/L和KH2PO460 mg/L.在30～36℃,接种量15%,pH=6～8条件下处理72 h后可使钻井废水中的石油烃含量由805.6 mg/L下降到17.6 mg/L.     

外循环厌氧处理工艺中布水和三相分离的改进研究

污水处理中的布水设备和三相分离设备存在很多缺点,通过旋流配水装置和传统配水装置、小间距斜板三相分离装置和传统三相分离装置的比较试验,研究了旋流配水装置和小间距斜板三相分离装置的性能.研究结果表明:在相同膨胀率的条件下,旋流配水装置所需的回流量小,能耗相对较少;在水力上升流速为8 m/h时,采用旋流配水装置进水时,污泥分布曲线较平缓,污泥在高度上分布较均匀,而采用传统配水装置进水时,污泥主要分布在反应器底部,污泥浓度分布不均匀;在上升流速相同的情况下,采用小间距三相分离装置的反应器出水携带的颗粒污泥浓度较小;在相同的进水COD浓度时,小间距三相分离装置分离的沼气量较多.改进的布水和三相分离装置的性能明显优于传统的布水和三相分离装置.     

采油废水处理方法与技术研究进展

采油废水具有成分复杂、可生化性差、含盐量高等特点,直接排放可对环境造成严重影响。对近年来国内外采油废水的特点和处理技术方法研究进展进行了综述,分析各类处理方法的特点,并提出了今后研究方向。     

改进的灰色关联投影法在大气环境质量评价中的应用

大气环境质量评价具有多指标的特点,且各指标的属性、重要程度和可比性都不相同,使得方案比选具有明显的不确定性。通过采用适应不同环境的分辨系数和基于信息熵的权重计算,来改进灰色关联投影方法,使得大气环境质量评价更加客观、公正和准确。最后用实例论证该方法是有效可行的。     

基于可拓学石化装置失效后果严重度评估方法研究

石化企业中,石化装置的安全运行对保证企业的安全生产起到关键作用,其一旦失效发生事故,将导致巨大的人员伤亡及财产损失。因此,开展石化装置失效后果严重性的评价研究,对保证石化企业的安全生产具有重要意义。本文根据物元可拓性理论,结合石化装置失效后果的严重性情况,运用可拓评判方法建立石化装置失效后果严重度的综合评判模型,给出了评价步骤,最终确定设备失效后果的严重程度。研究结果表明,该方法可应用于多层次的工程风险评价问题,从而为石化工程项目风险管理提供了一种有效的分析方法。     

高危作业有害因素预防控制水平预警模型

针对职业卫生领域出现的急慢性职业病及突发性化学中毒等事件,本文采用预防控制水平指标体系,用因子分析法构建了单项有害因素的预警模型。在此基础上,利用加权平均法给出了多项有害因素的综合预警模型,其中,应用层次分析法确定各个有害因素的权重。高危作业有害因素预警模型的提出为高危作业有害因素防治提供了量化的科学依据。     

航空公司安全目标控制的研究与改进

通过对航空公司安全目标控制现状的分析,得出了前馈控制中维修隐患查找不力,现场控制中员工自控和领导监督缺乏针对性、安全目标激励作用大打折扣、规章手册不利于查找,以及公司的反馈控制名存实亡等问题。并提出改进意见：针对维修隐患查找提出了新的查找机制;对员工安全指标排序,作为控制和监督的依据;引进目视管理,增强安全目标的激励作用;建议为维修员工提供能够快速查找相关手册项目的设备;使用滚动计划法制定安全计划,并借用其反馈框架,引入因果图查找产生偏差的原因。     

Modeling of air quality with a modified two-dimensional Eulerian model： A case study in the Pearl River Delta （PRD） region of China

A modified two-dimensional Eulerian air quality model was used to simulate both the gaseous and particulate pollutant concentrations during October 21-24, 2004 in the Pearl River Delta （PRD） region, China. The most significant improvement to the model is the added capability to predict the secondary organic aerosols （SOA） concentrations because of the inclusion of the SOA formation chemistry. The meteorological input data were prepared using the CALMET meteorological model. The concentrations of aerosol-bound species such as NO3^-, NH4^＋, SO4^2-, and SOA were calculated in the fine particle size range （〈2.5 μm）. The results of the two-dimensional model were compared to the measurements at the ground level during the PRD Intensive Monitoring Campaign （IMC）. Overall, there were good agreements between the measured and modeled concentrations of inorganic aerosol components and O3. Both the measured and the modeled results indicated that the maximum hourly O3 concentrations exceeded the China National Air Quality Standard. The predicted 24-h average SOA concentrations were in reasonable agreement with those predicted by the method of minimum OC/EC ratio.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.