Characteristics of the Predator–Prey Interactions and the Horizontal Distribution of Macrozoobenthos in Small Lakes of Different Types

The horizontal distribution and quantitative characteristics of macrozoobenthos were studied in small lakes of the Darwin Nature Reserve (southern Vologda oblast). The aggregation index varied in the open areas of acid lakes, which indicated that communities of small acid water bodies were unstable. The aggregation was the lowest in the open area of a neutral lake. In acid lakes, the number and biomass of macroinvertebrates were the highest near the coasts. In the neutral lake, conversely, these values were maximum in open areas and low near the coast due to a strong pressure of predatory invertebrates and fish. An aggregating effect of invertebrate predators was observed near the coasts of lakes of different types.     

山东省主要河流中抗生素污染组成及空间分布特征

采用固相萃取-液相色谱/串联质谱法研究了山东省境内四大流域主要河流中抗生素污染组成及空间分布特征,涉及我国用量最大的6类共20种抗生素。结果表明:20种抗生素均有检出,且大环内酯类、喹诺酮类和四环素类抗生素整体检出浓度较高。就流域而言,半岛诸河流域抗生素污染较小,平均总质量浓度61.4 ng/L;海河流域、小清河流域和淮河流域相对较为严重,平均总质量浓度分别为232、175、118 ng/L。抗生素空间分布呈现一定的规律,检出浓度较高的点位主要集中在人口密集区下游,抗生素污染与周边生活污水、养殖企业废水和城市污水处理厂排水密切相关,而且抗生素组成可从一定程度上反映出污染来源。     

地表水环境遥感监测关键技术与系统

介绍了地表水环境遥感监测的关键技术与系统及其典型应用,其代表性机理模型和应用示范成果主要来自于中国科学院遥感与数字地球研究所的高光谱遥感团队在最近几年中取得的一些研究进展,主要包括建立了基于改进双峰法的水体分布自动化遥感提取方法,实现了简单、高效和高精度的水体提取;提出了大型湖泊长时序水量估算方法,并以青藏高原湖区为例,重建了典型湖泊面积、水位和水量序列;发展了基于“软分类”的典型内陆水体叶绿素a浓度反演方法,构建了基于生物光学模型的高度浑浊水体悬浮物浓度遥感反演半解析方法,提高了反演方法的区域和季节适用性;构建了基于水色指数的大范围湖库营养状态和透明度遥感监测方法,实现了全球大型湖库营养状态遥感监测,以及全国大型湖库透明度遥感监测;在此基础上,开发了地表水环境遥感监测系统,提高了水环境遥感监测效率,促进了卫星遥感在水环境监测中的高精度业务化应用。     

Impacts of Changes in Precipitation Amount and Distribution on Water Resources Studied Using a Model Rainwater Harvesting System

Water supply reliability is expected to be affected by both precipitation amount and distribution changes under recent and future climate change. We compare historical (1951‐2010) changes in annual‐mean and annual‐maximum daily precipitation in the global set of station observations from Global Historical Climatology Network and climate models from the Inter‐Sectoral Impact Model Intercomparison Project (ISI‐MIP), and develop the study to 2011‐2099 for model projections under high radiative forcing scenario (RCP8.5). We develop a simple rainwater harvesting system (RWHS) model and drive it with observational and modeled precipitation. We study the changes in mean and maximum precipitation along with changes in the reliability of the model RWHS as tools to assess the impact of changes in precipitation amount and distribution on reliability of precipitation‐fed water supplies. Results show faster increase in observed maximum precipitation (10.14% per K global warming) than mean precipitation (7.64% per K), and increased reliability of the model RWHS driven by observed precipitation by an average of 0.2% per decade. The ISI‐MIP models show even faster increase in maximum precipitation compared to mean precipitation. However, they imply decreases in mean reliability, for an average 0.15% per decade. Compared to observations, climate models underestimate the increasing trends in mean and maximum precipitation and show the opposite direction of change in reliability of a model water supply system.     

Comparative evaluation of sizing of metal hydride (MH) hydrogen storage tank filled with different alloys

This study presents a comparative analysis of sizing of metal hydride tank filled with different alloys. Alloys include solid solutions and intermetallic compounds of the generic families AB₅, AB₂, AB, A₂B. The effects of the different alloys on the sizing of metal hydride hydrogen storage tanks are complicated and depend on many factors. In this paper, a thermoeconomic optimization analysis with a simple algebraic formula was presented for the estimation of optimum metal hydride tank surface area for heat transfer enhancement. The optimum area of the metal hydride tank filled with commercially available different alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) was evaluated and compared by the developed method. The optimum net savings and the value of payback were determined for four alloys. It is found that mathematical model can be employed for the determination of optimum metal hydride tank design and increasing net savings according to alloy types. The optimum areas of the tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) were calculated as 0.136, 0.130, 0.133, and 0.173 m², respectively. The optimum net savings for tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) are about 461.0, 409.3, 419.6, and 979.6 $ and the values of payback are about 1.98, 2.1, 2.17, and 1.37 years, respectively. Excessive area of the metal hydride tank would not be as economical as the optimum tank area. Thermal management of metal hydride tank must be designed for optimum points calculated at which maximum savings occur.     

Evaluating the impact of uncertainty and variability on the value chain optimization of a forest biomass power plant using Monte Carlo Simulation

Mathematical programming models have been used to optimize the design and management of forest bioenergy supply chains. A deterministic mathematical model is beneficial for making optimum decisions; however, its applicability to real-world problems may be limited because it does not capture all the complexities, including uncertainties in the parameters, in the supply chain. In this paper, a combination of Monte Carlo Simulation and optimization model is used to evaluate the impact of uncertainty in biomass quality, availability and cost, and electricity prices on the supply chain of a forest biomass power plant. The optimization model is a deterministic mixed integer non-linear model with monthly time steps over a 1-year planning horizon. Variability in biomass quality, i.e. moisture content (MC) and higher heating value (HHV), based on the historical data of a real case study is studied in detail and fitted probability distributions are used in the model, while for electricity prices different scenarios are considered. The results show that the impact of variability in the MC on profit is higher than that of uncertainty in HHV. It is observed that the annual profit ranges between $13.3 million and $17.9 million in the presence of all possible uncertainties while its average is $15.5 million. Uncertainty in biomass availability and cost and electricity price results in the risks of having annual profit of less than $14 million and low monthly storage levels.     

Suitable error evaluation criteria selection in the wind energy assessment via the K-means clustering algorithm

In this paper, wind energy potential of four locations in Xinjiang region is assessed. The Weibull distribution as well as the Logistic and the Lognormal distributions are applied to describe the distributions of the wind speed at different heights. In determining the parameters in the Weibull distribution, four intelligent parameter optimization approaches including the differential evolutionary, the particle swarm optimization, and two other approaches derived from these two algorithms and combined advantages of these two approaches are employed. Then the optimal distribution is chosen through the Chi-square error (CSE), the Kolmogorov–Smirnov test error (KSE), and the root mean square error (RMSE) criteria. However, it is found that the variation range of some criteria is quite large, thus these criteria are analyzed and evaluated both from the anomalous values and by the K-means clustering method. Anomaly observation results have shown that the CSE is the first one should be considered to be eliminated from the consequent optimal distribution function selection. This idea is further confirmed by the K-means clustering algorithm, by which the CSE is clustered into a different group with KSE and RMSE. Therefore, only the reserved two error evaluation criteria are utilized to evaluate the wind power potential.     

家庭农场土地征收补偿问题研究

随着未来家庭农场数量的逐渐增加与经营土地面积的不断扩大,与快速城镇化相伴随的土地征收区域不可避免会与家庭农场经营的土地范围相交叉或重叠。家庭农场主通过整合作为集体经济组织成员分得的承包地和市场化交易获得的承包地实现土地适度规模经营,因此,在家庭农场土地被征收时,应确保家庭农场主获得科学合理的补偿标准,并妥善处理家庭农场主与拥有不同类型农地权利的众多相关主体之间的利益分配关系。本文采用文献资料法和理论分析法,区分点状征地、线状征地和面状征地三种不同情况,分析了家庭农场土地征收的后期生产经营影响,在土地承包关系"长久不变"的政策框架下,深入剖析了家庭农场土地征收涉及的农地权利类型。然后,构建起家庭农场土地征收补偿标准理论模型,以及家庭农场主、政府、集体经济组织、农民等权利主体之间的收益分配理论模型。具体而言,家庭农场主根据自有土地、通过土地流转获得的土地、通过土地退出获得的土地所占的比重以及不同类型土地权利所对应的价值标准分得相应的征地补偿收益;政府通过税收参与征地补偿收益分配;集体经济组织凭借土地所有者身份依法分得相应比例的补偿收益;农民获得的征地补偿收益为承包经营权价值扣除其让渡给家庭农场主的农地权利价值后的剩余部分。最后,本文从四个方面提出了相应的对策和建议:1做好家庭农场发展规划;2提高征地补偿标准并将间接损失纳入补偿范围;3建立家庭农场规模化经营土地的征收补偿收益分配机制;4保障抵押权人(金融机构)对征地补偿享有优先受偿权。     

湿法脱硫系统对烟气中可吸入颗粒物特性影响的实验研究

采用荷电低压颗粒冲击器对4套湿法烟气脱硫(WFGD)系统进出口颗粒物进行在线检测和采样分析,获得烟气中PM10、PM2.5质量浓度以及粒径分布特征,并通过场发射扫描电镜(FESEM)和元素能谱对飞灰颗粒的形貌特征和主要元素含量进行分析。实验结果表明,由于脱硫塔喷淋浆液的洗涤作用,WFGD系统对飞灰颗粒有一定的脱除效果,但喷淋浆液产生的小液滴以及石灰石/石膏颗粒被携带进入烟气,导致WFGD系统对烟气中颗粒物质量浓度及粒径分布影响较大。WFGD系统对飞灰颗粒组成成分也有一定影响,以WFGD系统B为例,出口飞灰颗粒中Ca和S的质量分数从进口的1.60%、2.81%上升到出口的6.12%、10.92%。FESEM观察结果表明,脱硫后小颗粒在脱硫浆液的促进作用下团聚凝并,形成大颗粒,呈现致密的不规则块状、层状或絮状结构。     

Ce-Sn-W-O_x催化剂的配伍优化及脱硝影响因素

采用共混热解法制备系列Ce-Sn-W-Ox复合氧化物,用于NH3选择性催化还原NO。通过正交实验优化CeSn-W-Ox配方,采用环境扫描电镜(ESEM)、X-射线衍射仪(XRD)等表征分析催化剂的微观形貌和固相结构,确立Ce-Sn-WOx最佳配比及结构形貌。结果表明,以粒度为5~8 mm的堇青石瓷片担载分散Ce-Sn-W-Ox,进行NH3-SCR脱除NO,当Ce/Sn/W元素摩尔比为1∶0.8∶0.6时,Ce Sn0.8W0.6Ox/堇青石NH3-SCR脱除NO效果最好。当空速为7 200 h-1,催化剂在252~426℃内脱除NO效率均大于94%。重点考察了反应空速(GHSV)、水蒸气(H2O)、SO2等对Ce Sn0.8W0.6Ox/堇青石NH3-SCR脱除NO活性的影响。研究表明,空速低于10 000 h-1时,催化剂脱硝活性受空速影响小;单独通入5%H2O对催化剂脱硝活性基本没有影响;单独通入429 mg/m3SO2导致催化剂活性略有降低;同时通入429 mg/m3SO2和5%H2O,催化剂脱硝活性下降至85.33%,除去SO2和H2O后,催化剂活性又能明显回升。