斜管沉淀池应用中存在问题的探讨

斜管沉淀池是目前广泛使用的污水物化处理工艺。针对实际应用所遇到的问题，如沉淀池进口布水不均匀，致使出水水质下降，从沉淀的基础理论，通过水力学的分析，较深入地说明了斜管沉淀池矾花泛起，水质恶化的原因。并提出了应用斜管沉淀池应注意的事项。     

农药废水的“物化+生化”处理技术研究

生产久效磷和亚磷酸三甲脂产生的废水是高浓度、毒性大的有机农药废水 ,采用适当的物化手段作为预处理可以降低废水的CODCr和毒性 ,提高废水的可生化性 ,再经过以光合细菌为主的接触氧化处理 ,整个系统CODCr的去除率达到 99% ,出水CODCr降低至 2 0 0mg/L。     

利用神经网络及数值模拟获取变压边力控制曲线

在应用Dynaform、Autoform等板料数值模拟软件的过程中 ,通常需要对压边力施力曲线进行各种预先的设定 ,但如何选定施力模式一直是一个比较棘手的问题 ,在文中利用数值模拟及MATLAB中的神经网络工具箱得出了压边力的最优控制曲线     

萜烷作为溢油指物（或指标）的研究

用毛细管GC-MS对溢油中的萜烷进行分析，结果表明，在一年多的风化过程中，作为溢油指示物（或指标）的萜烷及其比值参数，受风化影响很小。     

周边式二次沉淀池流态的计算模拟研究

通过计算模拟二沉池流态,解决了二沉池流态测定的难题,该模拟方法速度快、精度高、不需要实型池.通过对实际池的计算发现,周边式二沉池上溢流集中在靠池周边的区域,以垂直向上的流线为主,池中心上部存在着较大的水流死区,由此解释了该类型池澄清能力小的原因.     

方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

制革废水治理方法的研究

对制革废水进行了实验研究，提出了制革废水的处理方法．即首先对铬鞣废水进行单独处理，回收鞣革液，再采用聚合硅酸系混凝剂和聚丙烯酰胺（ＰＡＭ）来处理混合废水的新方法．     

铁炭内电解法处理染料废水的试验

文章采用铁屑一活性炭内电解法作为光合细菌生化处理染料废水的预处理方法，考查了3个主要影响因素（铁炭比、停留时间、初始pH值）。结果表明，最佳的处理条件为：铁炭比为7：3，pH值为5，停留时间为60min。在上述最佳处理条件下，对初始COD为6790mg／L的染料废水处理效率可以达到66．1％，并且废水经预处理后可生化性得到大大提高，有利于后续生化处理的进行。