动态渗透压力法研究水处理滤料的润湿性

润湿性是水处理滤料的一个十分重要的表面性质.以Washburn方程为原理,用动态渗透压力法研究了无烟煤、铝矾土陶瓷及磁铁矿滤料的亲油亲水润湿性.实验结果表明,方法的重现性较好,误差在10%以内.当滤料的粒径范围在0.6～0.9mm之间时.以该法测得无烟煤、铝矾土陶瓷及磁铁矿滤料的亲油亲水比(LHR)值依次为2.511、1.748和1.317,说明无烟煤滤料的亲油性最好,铝矾土陶瓷次之,而磁铁矿的亲油性最差.XPS和FTIR分析结果表明,无烟煤、铝矾土陶瓷及磁铁矿滤料润湿性差别主要归因于其表面化学结构的不同.     

国外自然环境试验站网管理现状分析

介绍了国外自然环境试验站网及其管理技术概况,分析了国外军用和民用自然环境试验站网的共同点和差异。结果表明,国外的自然环境试验站网近几年有不断扩大的趋势,同时重点在我国周边布局;国防自然环境试验被发达国家看成军队乃至国家的宝贵财富,通过财政和政策等手段给予支持,同时鼓励军民两用。站网管理的主要手段有认证认可、优化配置、充分利用软硬件、注重标准化、加强宣传、开展合作等。     

基于神经网络的闸阀模糊可靠度计算

为提高闸阀可靠度计算准确性,将模糊准则引入闸阀可靠性设计,将闸阀应力与阀体通径、内压之间隐式关系显式化,并基于神经网络构建地震工况下闸阀数学模型;利用蒙特卡洛法,计算闸阀在常规方法下的可靠度;利用正态型隶属函数描述闸阀强度的模糊性,计算闸阀在考虑模糊强度时的可靠度;对比强度的模糊性对可靠度计算结果的影响,分析不同隶属函数下的闸阀模糊可靠度。与传统随机可靠度计算方法相比,该方法对不确定性描述更合理,理论上对可靠度的计算更加准确。     

Sustainability Appraisal in neighbourhood planning in England

The preparation of strategic environmental assessment (SEA) inclusive sustainability appraisals (SAs) for neighbourhood plans (NPs) in England may be required when significant environmental effects are expected to arise from an NP. In this paper, we report on the result of a Ph.D. project, conducted between 2012 and 2015, in which all 15 NP SEA inclusive SAs that had been completed at the time were evaluated. In this context, the quality of SA practice was found to differ substantially. SAs were prepared either ‘in-house’ (i.e. by neighbourhood planning steering groups) or by consultants. The quality of SAs was found to be associated with their overall perceived degree of influence on the underlying NPs. Whilst the focus of this paper is on practice in England, findings are expected to be of interest to a wider international audience, in particular to those experimenting with voluntary neighbourhood/local level plan SA/SEA.     

Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

Dynamic contact angle effects on gas-liquid behaviors in the cathode of proton exchange membrane fuel cell with stirred tank reactor design

Liquid water management is still a critical issue in the improvement of proton exchange membrane fuel cell (PEMFC) performance. In this work, for the first time, the liquid water behavior and transport inside the cathode of a PEMFC with a stirred tank reactor (STR) design, rather than the conventional PEMFC flow channel design, are numerically studied. The dynamic contact angle (DCA) is applied to multiple wall boundaries in the numerical model through a user-defined-function (UDF) code, i.e., STR-DCA model. Another numerical model with the static contact angle (SCA) and same operating conditions, i.e., STR-SCA model, is also developed for comparison. The volume of fluid (VOF) method is employed in the simulation to track the gas-liquid interface. The results show that the liquid water distribution and transport are significantly different between these two models, indicating the remarkable effects of DCA on the simulation results. It is also verified the capability of STR-PEMFC to reduce the liquid water flooding, showing the potential of this channel-less type fuel cell in the further development.     

巷道冲击地压模拟试验及其过程动态演示

以巷道冲击地压灾害为典型案例,通过对巷道类冲击地压事故机理的分析,设计了一项巷道冲击地压试验装置,通过视频剪辑和动画制作技术,实现了对冲击地压试验的全程记录,并利用分频、字幕说明等形式对冲击地压试验动态过程进行了演示和说明。结果表明,该试验装置结合了巷道冲击地压发生原理,以动画方式演示,具有直观、简洁、易于理解的特点,为揭示冲击地压过程及其发生机制提供了一种新方法。     

基于PCA-FPP-BP神经网络的高层建筑火灾安全评价

为解决高层建筑构造复杂、人员密度大、火灾触发因素繁多而造成高层建筑火灾安全评价困难的问题,本文提出基于PCA-FPP-BP神经网络的高层建筑火灾安全评价模型。首先运用主成分分析(PCA)对构建的高层建筑火灾安全评价指标降维处理,筛选主要信息;接着基于三角模糊数构建模糊评判矩阵,利用模糊优先规划(FPP)求解指标的权重值,减少主观的影响;最后考虑到指标间关系错综复杂彼此交叉和反馈的特性,选择BP神经网络对高层建筑火灾安全进行评价。通过工程案例证明该评价模型的实用性以及可靠性。     

基于广义概念的城市燃气管道泄漏精确定位

为了准确地检测城市燃气管道泄漏,提出了一种基于广义概念的管道泄漏检测定位方法。声发射技术对于管道泄漏的检测、定位是一个极好的工具,但由于泄漏源的传播容易受到周围背景噪声以及复杂工况的影响,其定位误差较大。基于时延估计的互相关信号处理方法被广泛用于管道泄漏检测定位,但由于泄漏应力波传播通道的动态特性,使得源信号在传播过程中会产生波形变化,给互相关函数峰值位置的确定带来困难。由此引入广义相关分析方法,通过对信号进行前置滤波,在一定程度上减少了传播通道动态特性因素对泄漏点定位的不利影响,得到了更为准确的时延估值。在此基础上,通过模拟实验,编写Matlab神经网络代码,构造GRNN模型,进一步预测定位。结果表明,GRNN预测的声发射检测值、互相关定位值以及广义相关定位值,相比之前定位精度分别得到提高,其中基于广义相关的延时估计方法定位最为精确,将该方法用于工程实际中,可以更加精确地定位出泄漏点。     

基于互联网+的轨道交通动力设备安全管理系统的研究

根据我国轨道交通设备安全管理的需求,提出基于互联网+的轨道交通动力设备安全管理系统平台的框架,运用J2EE开发工具,采用嵌入式高速数据采集技术、故障诊断技术,构建形成集成化、网络化和信息化的轨道交通动力设备安全管理系统。完善智能的设备安全管理系统,能有效提高轨道交通动力设备的安全监管力度,保障设备安全。