模拟医疗废物在管式电阻炉上的热解特性研究

在管式电阻炉上对由聚丙烯、面巾纸、纱布、医用脱脂棉、一次性口罩、医用乳胶手套等按一定比例组成的模拟医疗废物在氮气气氛进行了热解研究。重点探讨了10K／min，20K／min，30K／min和40K／min等不同升温速率对热解产物分布、产气特性和热解过程的影响。结果表明，随着温度升高，模拟废物的热解产生气体的主要成分逐渐由CO2和CO转变为C3H6、CH4、C2H6、C2H4和C3H8。同时，热解处理对模拟废物的减量化效果比较明显，固体残留率仅为5．61％～7．02％。而且，加热速率对模拟医疗废物热解过程的影响较大。     

高炉瓦斯泥的回收与利用

通过对济钢高炉瓦斯泥进行分离回收与综合利用的系统试验研究,作者推荐采用浮—重联合流程分离回收其中的炭和铁。试验获得如下指标:炭精矿品位80％,回收率50％;铁精矿品位60％,回收率45％;次铁精矿品位45％,回收率11.5％。经济和社会效益明显。     

萝北县矿山企业的环境问题与整治对策

萝北县矿产资源丰富,矿山开采遍布北部山区,对环境造成一定的破坏.本文分析了环境破坏的原因,提出了整治对策.     

土地荒漠化的成因、危害及防治对策

土地荒漠化是指在干旱、半干旱和某些半湿润、湿润地区,由于气候变化和人类活动等各种因素所造成的土地退化,它使土地生物和经济生产潜力减少,甚至基本丧失.我国是全球荒漠化面积较大、分布较广、危害较严重的国家之一.近年来由于采取了一系列有效的治理措施,荒漠化和沙化整体扩展的趋势已得到初步遏制,但形势依然严峻.     

窄小场地条件下柴油发电机噪声综合治理

介绍一例窄小场地条件下柴油发电机噪声综合治理工程。通过对机房实行整体封闭隔声与吸声、以消声道兼作通风道强制通风、以消声器加垃圾道消除排气噪声等综合措施 ,使柴油发电机噪声完全达到标准。     

“成型-烧结”碎磷矿的黄磷生产工业性试验

将中小黄磷企业长期堆存的碎磷矿 (粒径 <5mm) ,经过“粘接成型 烧结”及理化指标检测后 ,按烧结矿∶块矿 =1∶1入炉进行工业性试验 ,试验表明该烧结矿可用于黄磷电炉生产 ,该法是降低黄磷生产成本 ,减少环境污染 ,使资源得到合理利用的有效途径之一     

碳酸盐岩地表岩溶与红粘土

从红粘土的分布特征、土体构造特征及土性特征入手,系统研究红粘土的成因,包括研究碳酸盐岩地表岩溶与红粘土的相互作用、红粘土的物质来源、土中矿物的种类和形成条件;着重分析碳酸盐岩地表岩溶的作用、特点对红粘土形成的重要影响;认为碳酸盐岩地表岩溶作用和红土化作用是红粘土特殊成因中的两种最重要的地质作用,而前者不仅是控制红粘土性质的主要因素,还影响成土后期的土质演化过程。红粘土特殊性的本质源于特殊的成因。     

干法高炉煤气净化在唐钢一炼铁厂3~#高炉易地大修中的应用

详细介绍了唐钢３＃高炉干法煤气净化系统。该系统与湿式高炉煤气净化系统相比，提高了煤气质量，节能效果显著，具有广泛的推广使用价值。     

层燃—流化床焚烧城市垃圾技术

首次提出的层燃－流化床燃烧技术是适合我国国情的城市垃圾处理技术，可使预处理过程达到最简化并保证燃烧过程的稳定必和彻底性，给出了层燃－流化床双床焚烧炉的结构和工作原理。     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.