曝气-电解生态浮床的净化效果与机理分析

为强化生态浮床对重污染河道水体的净化能力,采用曝气-电解生态浮床联合技术增强生态浮床的净化功能.试验考察了电流密度、曝气量和处理时间对模拟的高氮磷重污染水体的净化潜力,分析了电解反应对填料细菌群落结构组成和浮床水生植物黄菖蒲（Iris pseudacorus）生长的影响.结果表明：在进水NH₃-N浓度为10 mg·L^-1,PO₄^3--P浓度为0.8 mg·L^-1,电流密度为0.74 mA·cm^-2,水力停留时间为3 d的条件下,相比于电解生态浮床和传统的生态浮床,曝气-电解生态浮床有利于水体中NH₃-N的去除（p<0.001）,其NH₃-N浓度下降至（0.92±0.24）mg·L^-1,而电解生态浮床处理的水体NH₃-N浓度为（6.85±0.17）mg·L^-1,传统生态浮床处理水体中NH₃-N浓度高达（8.09±0.40）mg·L^-1,曝气促进了水体中NH₃-N向NO₂^--N和NO₃^--N的转化.电解有利于水体中PO₄^3--P的去除,电解生态浮床处理水体中的PO₄^3--P浓度下降至（0.43±0.02）mg·L^-1,曝气-电解生态浮床处理的水体中PO₄^3--P下降至（0.46±0.02）mg·L^-1,可见,电解促进了PO₄^3--P的去除.从对I.pseudacorus生理生化指标变化分析可知,曝气有利于减弱电解反应对I.pseudacorus的损伤;对基质生物膜的16S rDNA分析可知,电解反应增加了浮床基质中自养反硝化微生物数量.因此,曝气-电解生态浮床是一种有效的净化重污染水体的方法.     

棉布厚度对辐射式电暖器引燃能力影响研究

实验研究了棉布厚度对辐射式电暖器的引燃能力影响情况。实验用电暖器上加热管向外辐射热通量占电器功率之间的比例(辐射率η值)为65%。辐射式电暖器可以使棉布发生阴燃燃烧,当单面工作功率为400 W的电暖器紧贴棉布且全过程全覆盖的前提下棉布阴燃的临界厚度在0.18 mm～0.48 mm之间,当棉布厚度超过0.48 mm时将发生阴燃,但薄棉布通常难以直接发生有焰燃烧。对于用棉布开始阴燃时间表征的电暖器引燃能力,随着棉布厚度的增大,电暖器对棉布的引燃能力将减弱。     

Occupational exposure to electric and magnetic fields during tasks at ground or floor level at 110 kV substations in Finland

The aim was to investigate occupational exposure to electric and magnetic fields during tasks at ground or floor level at 110?kV substations in Finland and to compare the measured values to Directive 2013/35/EU. Altogether, 347 electric field measurements and 100 magnetic field measurements were performed. The average value of all electric fields was 2.3?kV/m (maximum 6.4?kV/m) and that of magnetic fields was 5.8?µT (maximum 51.0?µT). It can be concluded that the electric and magnetic field exposure at ground or floor level is typically below the low action levels of Directive 2013/35/EU. The transposition of the directive will not create new needs to modify the work practice of the evaluated tasks, which can continue to be performed as before. However, for workers with medical implants, the exposure may be high enough to cause interference.     

除尘器灰斗电加热器供配电节能降耗方案优化

对目前广泛使用的除尘器灰斗电加热器的供配电系统进行了分析,提出了电控设备投资更省、供配电系统运行更节能经济的优化方案,并通过工程实例进行了分析验证。     

Understanding traffic crash under-reporting: Linking police and medical records to individual and crash characteristics

Objective: This study aligns to the body of research dedicated to estimating the underreporting of road crash injuries and adds the perspective of understanding individual and crash factors contributing to the decision to report a crash to the police, the hospital, or both.

Method: This study focuses on road crash injuries that occurred in the province of Funen, Denmark, between 2003 and 2007 and were registered in the police, the hospital, or both authorities. Underreporting rates are computed with the capture–recapture method, and the probability for road crash injuries in police records to appear in hospital records (and vice versa) is estimated with joint binary logit models.

Results: The capture–recapture analysis shows high underreporting rates of road crash injuries in Denmark and the growth of underreporting not only with the decrease in injury severity but also with the involvement of cyclists (reporting rates of about 14% for serious injuries and 7% for slight injuries) and motorcyclists (reporting rates of about 35% for serious injuries and 10% for slight injuries). Model estimates show that the likelihood of appearing in both data sets is positively related to helmet and seat belt use, number of motor vehicles involved, alcohol involvement, higher speed limit, and females being injured.

Conclusions: This study adds significantly to the literature about underreporting by recognizing that understanding the heterogeneity in the reporting rate of road crashes may lead to devising policy measures aimed at increasing the reporting rate by targeting specific road user groups (e.g., males, young road users) or specific situational factors (e.g., slight injuries, arm injuries, leg injuries, weekend).     

我国大陆地区电器电子产品报废量预测研究

随着我国电器电子产品的报废量不断增长,准确预测报废量及其分布对回收网络体系规划研究十分关键.本文利用Gompertz模型及保有量系数法对我国电器电子产品报废量进行建模,在验证预测模型及结果准确性的前提下,对全国31个省2003—2020年电视机、电冰箱、洗衣机、空调及电脑的报废量进行预测,并对5种家用电器报废总量构成、时间序列及空间分布进行分析.结果表明,到2020年,我国5种家用电器报废量将达到20.3亿台,广东省以1794万台报废量列居全国首位,上海市以1083台·km~(-2)的报废密度列居首位;按现有回收处理规模,2014年全国仍存在103万t待处理缺口.最后对废旧电器电子产品拆解处理产能布局提出了合理化建议,为我国的家用电器回收网络规划提供参考.     

电光源产品升级研究

本文罗列了近年来电光源产品的一些重要技术壁垒，并对这些壁垒进行了统计和分析，提出我国生产企业只有引进先进理念，变“被动应付”为“主动抵御”，才能实现电光源产品升级的观点。文章从四个方面详细阐述了技术壁垒的应对措施和产品升级设计的理念，希望对电光源生产企业提高产品质量有一定的启发。     

High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas–liquid fluidized bed reactor

In this research a gas–liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas–liquid fluidized bed reactor was running at 280–320 °C, where hot N₂ was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N₂ to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 °C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N₂ gas was set around 0.47–0.85 Nm³ kg^?1 for the molten PVC. Larger N₂ flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N₂ flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas–liquid fluidized bed reactor for dechlorination.     

Thermal valorization of post-consumer film waste in a bubbling bed gasifier

The use of plastic bags and film packaging is very frequent in manifold sectors and film waste is usually present in different sources of municipal and industrial wastes. A significant part of it is not suitable for mechanical recycling but could be safely transformed into a valuable gas by means of thermal valorization. In this research, the gasification of film wastes has been experimentally investigated through experiments in a fluidized bed reactor of two reference polymers, polyethylene and polypropylene, and actual post-consumer film waste. After a complete experimental characterization of the three materials, several gasification experiments have been performed to analyze the influence of the fuel and of equivalence ratio on gas production and composition, on tar generation and on efficiency. The experiments prove that film waste and analogue polymer derived wastes can be successfully gasified in a fluidized bed reactor, yielding a gas with a higher heating value in a range from 3.6 to 5.6 MJ/m³ and cold gas efficiencies up to 60%.     

喷射床电沉积法处理含铜废水的试验研究

以实验室模拟含铜废水为研究对象,采用恒电流喷射床微粒电沉积法对其进行条件试验.结果表明,在pH=3.0、沉积液质量浓度为1 g/L、恒电流为10 A、阴极微粒粒径为1.8 mm、沉积液温度为20℃、鼓入氮气的条件下,铜离子的最大去除率为87.64％,平均电流效率可以达到81.53％,较同等条件下平板电极提高了63％.喷射床微粒电极采用的阴极微粒电极具有较大的比表面积,微粒的喷射循环能够有效地消除沉积过程中出现的浓差极化现象,鼓入氮气可以明显降低沉积液中的溶解氧浓度,从而抑制沉积的金属铜返溶,因此,喷射床微粒电沉积法在处理含铜废水时能够获得较高的电沉积率和电流效率.