DEM AGGREGATION FOR WATERSHED MODELING1

ABSTRACT: The widely available USGS 7.5‐minute Digital Elevation Model (DEM) has a cell size of approximately 30 m × 30 m. This high resolution topographic information is impractical for many applications of distributed hydrologic and water quality models. In this study, cells were aggregated into coarse‐resolution areal units, termed grids, and a method to approximate flow direction for coarse‐resolution grids from 30 m DEM cells was developed. The method considers the flow path defined from the fine‐resolution DEM in determining a grid's flow direction and makes flow directions for grids closely follow the flow pattern suggested by the DEM. The aggregation method was applied to a DEM of Goodwater Creek, a nearly flat watershed that is located in central Missouri. The drainage networks derived for different levels of cell aggregations showed that grid aggregates of the Goodwater Creek watershed provided an adequate representation of the landscape topography.     

倾角和循环流量对平板型光催化反应器性能的影响

考察了平板倾角和循环流量对平板反应器流动特性和性能的影响 ,并讨论了以太阳光为辐射光源时平板型反应器的最佳倾角问题 .研究表明 ,平板上液体体积 (V)和水膜厚度 (b)与倾角 (β)、循环流量 (Q)分别存在定量关系 .入射辐射条件相同时 ,在悬浮催化剂体系中 ,平板倾角越小 ,循环流量越大 ,反应器性能越高 ;在固定催化剂体系中 ,平板反应器 (长 1m,宽 0.48m)的性能最佳时的循环流量为 500L/h、倾角为 10°,相应雷诺数为 286.无论在悬浮催化剂还是固定催化剂体系中 ,周期性地辐射能提高反应速率 .     

汶川地震极重灾区地形起伏度特征及其与生态环境受损关联分析

采用DEM数据对汶川地震极重灾区地形起伏度特征分析,海拔高度和地形起伏度总体上是南西高,北东低。5km×5km单元地形起伏度〉1000m的区域面积占27．98％。0．5km×0．5km单元〉100m的区域面积占50．63％。在8．0级主震和6．4级余震震中之间典型区段剖面0．5km间隔分析中,南西段起伏度大于北东段,南西段起伏度〉200m区段占全段14．84％,北东段仅占6．64％。地震导致生态环境受损程度的差异与地形起伏度的差异在空间分布上有一定的重合,具有高起伏度的南西段生态系统破坏面积占总破坏面积的88．55％,新增水土流失面积占新增总面积的70．99％。地震灾区地形起伏度是生态环境遭受严重破坏致灾关联因素之一。     

结构面分布特征对隧道围岩变形影响的数值模拟分析

结构面对隧道围岩变形及稳定性起着决定性作用。运用三维离散元方法(3DEC)研究结构面分布特征,重点是结构面线密度1/λ、强度和倾角对隧道围岩变形的影响,总结了结构面分布与围岩变形特征的关系。结果表明,在结构面强度较低的情况下,结构面线密度对隧道变形的影响较大,其影响可分为两种情况:①λ≤0.2时,围岩的弯曲变形大于沿结构面的剪切变形,属于应力型大变形;②0.2<λ≤0.4时,沿结构面的剪切变形大于围岩的弯曲变形,属于结构型大变形。结构面倾角主要影响围岩大变形发生的位置。将数值模拟结果与国内工程实例实测变形资料相对比,发现一致性较好。本研究结果对隧道支护结构的设计以及施工设计具有借鉴意义与指导作用。     

GIS环境下大区域工程场地地震液化势的二维概率评价方法

用具有概率意义的饱和砂土抗液化强度经验公式来对大区域场地进行地震液化势二维概率评价;在GIS软件ArcGIS的支持下,将取样钻孔处的液化势评价结果等价于数字高程模型(Digital Elevation Model,DEM)中的高程,利用ArcGIS空间分析模块中的Kriging插值法估计大区域场地的地震液化范围。研究表明:将Kriging法应用于岩土工程地质特征的统计推断,有助于揭示勘探孔以外的地层信息,对于大区域场地地震液化范围的判别是一个较好的手段;利用ArcGIS空间分析模块中的Kriging法,通过已勘察点的信息(液化势)来估计未勘测点的土层液化势,能够较好地区划出场地地震液化势的空间分布特征。     

基于双高速摄影的着靶姿态测量方法

目的 获取物体在三维空间中的飞行着靶姿态.方法 提出一种基于2台高速相机双光轴交汇的测量方法,即利用2台相机同步拍摄,获得各自物体的姿态角度,根据相机光轴方位、相机与目标物体的空间位置关系,推导出物体着靶角的数学表达式,结合实际应用需求,获得几种特殊情形下的简化形式.结果 把该方法应用于跌落试验的实测分析,迅速且准确地...     

硬机翼喷气运输飞机污染问题分析

针对硬机翼飞机因污染发生事故率较高的事实,通过对多起硬机翼喷气飞机起飞阶段由于污染而失速坠毁事故的分析,研究现代硬机翼喷气飞机失速特性、对污染的敏感程度和敏感原因,进一步讨论各种防范机翼污染引起失速的措施。最后针对硬机翼飞机对污染敏感的特点,建议适航部门提高新型硬机翼飞机适航标准,硬机翼飞机运营人采取措施严格杜绝飞机带污染起飞。     

用计算机模拟送进角与辗轧角对Accu-Roll轧机变形区的影响

在建立Accu-Roll轧机变形区模型的基础上,开发出计算机模拟软件,可方便地通过变形区纵剖面计算机图象显示分析工艺参数对变形区的影响,从而为合理地选取与优化工艺参数提供依据。     

The internal barriers of rotation for the 209 polychlorinated biphenyls

The internal barrier of rotation (Erot) was calculated for all 209 polychlorinated biphenyls (PCBs) by using a semi-empirical method, viz. the Austin Model 1 (AMI) Hamiltonian. The difference in total energy between a forced planar state and an optimised twisted structure was defined as Erot. The Erot values were in the range of 8.33 to 483 kj/mol, and were significantly influenced by the number of chlorine atoms inortho position. An additional structural characteristic of the PCBs influencing Erot ofortho substituted congeners was substitution by chlorine atoms in vicinalmeta positions, which is assumed to prevent outward bending ofortho substituents. This so-called buttressing effect contributed with 4 to 31 kj/mol per added chlorine atom. In conclusion, the internal barrier of rotation, calculated for all 209 PCBs, provides an important structure dependent physico-chemical parameter for multivariate modelling of future quantitative structure-activity and structure-property relationships (QSARs/QSPRs).     

Migration of saline solutions in variably saturated porous media

Migration of concentrated NaNO3 solutions in homogeneous packs of pre-wetted silica sands was investigated using a light transmission system. Solutions of 5 molal NaNO3 were found to migrate downward 24-62% faster than pure water, in an unstable, fingered manner. This behavior was attributed primarily to a surface tension induced, non-zero apparent contact angle between the imbibing and the resident fluids. For saline solutions of similar surface tension to that of pure water (achieved by the addition of 2% methanol), the migration rates and plume shapes were comparable to that of water, demonstrating that density was not the primary source of the observed differences in migration patterns. At depths where resident saturation increased above residual, the migration process appeared to occur via film flow with slight changes in saturation (<4%), rather than in a series of abrupt jumps, as observed at shallower depths. A method for contact angle scaling was used to illustrate the effects of non-zero contact angles on capillary pressure-saturation curves.