气候变化视角下的我国沿海地区防潮设计标准研究 ——以福州滨海新城为例

分析了福州滨海新城所面临的洪潮灾害风险和海堤建设规划情况.从全球气候变化导致福建沿海海平面上升的影响出发,介绍了国外沿海城市在考虑气候变化背景下如何确定海堤设计标准和我国防潮堤设计标准确定方法,分析了我国防潮堤现行设计标准存在的问题和风险,并对未来福州滨海新城防潮堤设计标准改进提出了建议,可供我国沿海地区相关问题参考.     

MODIFIED WATER QUANTITY RECEIVING MODEL FOR FLORIDA CONSERVATION AREAS1

ABSTRACT: The Conservation Areas in South Florida have been considered as one of the major water storage areas to provide a water supply for the Everglades National Park and Lower East Coast (LEC). Due to the increasing water demands of the area, additional backpumping of the surplus runoff from the LEC area into the Conservation Areas has been considered as one of several alternative plans. The Receiving Water Quantity (EPA, 1971) model has been adapted and modified to be applicable in the Conservation Areas to investigate the possible impact of additional inflow under various backpumping cases. The modification of the model included Manning's roughness coefficient, depth of flow, width of hypothetical channels through marsh areas, rainfall input, seepage rate, etc. The use of the Monte Carlo technique for area computations was found to be easy and time saving both in area and weighting rainfall input to each node. Comparison of results generated by this modified model with the recorded values in Conservation Areas 1 and 2A indicated that the model not only can be a very good evaluation tool to simulate the hydraulic regime of the Conservation Areas system but also a proper tool for investigating the impact of additional inflow resulting from the backpumping related to the water use planning and management.     

磨料浆液除锈机理的研究

本文将冲蚀机理引入金属除锈工艺。通过分析冲蚀的单元作用机理、冲击过程中能量平衡及影响冲蚀的诸因素，阐明了金属除锈的机理。利用刚性粒子冲击塑性材料的模型推导出了除锈效率较高的最佳射流入射角。在钢板除锈应用过程中先以９０°入射角冲击钢板，使钢板上的脆性表层很快形成赫兹裂纹，并且容易脱落，再以１６．４８°的入射角冲蚀钢板，效果理想。     

长江中、下游印支运动性质问题

本文以地层学的观点分析了长江中、下游地区早期中生代地层沉积及构造特征后,指出地层分布上虽存在“脱节”与“分离”,构造形态上存在差异和不协调,但在总体上又是统一和相成的,同于处一个构造体系之中。作者认为本区印支期地壳运动是一种和缓的、以升降作用为主的运动;地壳变形主要表现为隆起与拗陷。早期地壳上升(相当于金子运动)—由浅海逐渐变为陆地,晚期地壳上升(相当于南象运动)一形成了沉积间断和风化剥蚀,其中并发生构造运动的东向迁移和沉积作用的北向迁移。     

B级钢侧架圆角细节耐久性力学模型研究

根据Paris公式推导出适用于B级钢圆角细节耐久性分析的 ,在一定裂纹尺寸范围内的裂纹扩展速率公式及其检验方法 ,笔者模拟货车B级钢转 8A侧架的导框弯角内侧 (A区 )的圆角细部进行耐久性实验 ;以试验数据的检验证明 ,在 0 .4～ 4mm的尺寸范围内 ,选用的断裂力学模型是合理的 ;同时为建立合理的检修周期和寿命体系提供理论模型和安全评价基础。     

水位高程变化对湿地土壤微生物代谢功能的影响研究——以蚌湖为例

在淡水湖泊生态系统中,水位高程的变化会对整个生态系统产生重要的影响。本研究以鄱阳湖最具代表性的碟形湖——蚌湖为实验地点,研究了水位高程对于湖泊湿地土壤微生物代谢功能的影响。在实验中沿水位高程及植被带演替布设6个样地,利用Biolog-Eco技术探究不同水位高程样地土壤微生物群落代谢功能的多样性及分布规律。结果表明:随着样地水位高程的降低,土壤含水量逐渐升高,地表植被的覆盖率逐渐减少,土壤有机养分出现先减小后增大的趋势;而土壤微生物对碳源代谢活性随着高程的降低依次减弱,且优先利用的碳源种类和碳源利用率也有显著不同。通过dbRDA排序分析表明:土壤微生物群落功能多样性沿高程呈现区域性分布特征,相邻的两样地土壤微生物碳源代谢功能更为相近。影响湿地土壤微生物碳源代谢功能的主要因子为土壤含水量、土壤有机质含量、pH、NH_4-N和地表植被类型。本研究结果可为合理管理和保护鄱阳湖湿地生态系统提供科学的指导。     

重庆地下热水径流特征研究

重庆地下热水资源丰富,但对其径流特征缺乏研究,盲目开采致使许多温泉泉流量减小、水温降低,甚至断流、枯竭。为指导地下热水的科学开采,文章对重庆地下热水的常规化学组分及同位素组分特征进行了研究,分析了地下热水补给、径流条件,指出大气降水为其补给源,补给区在重庆以北大巴山及华莹山背斜华莹山和铜锣峡背斜北端的岩溶露头区,嘉陵江组(T1j)为其储水层,地下热水主要沿背斜T1j地层由北往南流,同一背斜地下热水由北到南为一个统一的热水系统。     

Airborne Dust Particle Counting Techniques

The paper briefly describes an electro-optical system for counting of dust particles, which is based on the scattering phenomena.Utilizing the scattering of light by various size particles present in the environment, various particle counting techniques have been developed in order to measure the scattered intensity of light. Light scatters in all directions but much more in the so-called near forward direction 17^∘ off axis, at 163^∘ from the light source in the visible range.On the basis of two techniques, the right angle and forward angle scattering, opto-mechanical systems have been developed which measure scattered intensity and particulate matter. The forward scattering Nephelometer is more sensitive and therefore is more suitable for pollution monitoring than the right angle scattering Nephelometer. Whereas the right angle scattering Nephelometer has the utility in extremely low concentration in ppb level owing to the excellent light trap efficiency in comparison to forward scattering Nephelometer. In this paper measurement techniques and measurement results associated with design and development of a real time particle analyser are also discussed.     

Modeling Streams and Hydrogeomorphic Attributes in Oregon From Digital and Field Data1

Abstract: Managers, regulators, and researchers of aquatic ecosystems are increasingly pressed to consider large areas. However, accurate stream maps with geo‐referenced attributes are uncommon over relevant spatial extents. Field inventories provide high‐quality data, particularly for habitat characteristics at fine spatial resolutions (e.g., large wood), but are costly and so cover relatively small areas. Recent availability of regional digital data and Geographic Information Systems software has advanced capabilities to delineate stream networks and estimate coarse‐resolution hydrogeomorphic attributes (e.g., gradient). A spatially comprehensive coverage results, but types of modeled outputs may be limited and their accuracy is typically unknown. Capitalizing on strengths in both field and regional digital data, we modeled a synthetic stream network and a variety of hydrogeomorphic attributes for the Oregon Coastal Province. The synthetic network, encompassing 96,000 km of stream, was derived from digital elevation data. We used high‐resolution but spatially restricted data from field inventories and streamflow gauges to evaluate, calibrate, and interpret hydrogeomorphic attributes modeled from digital elevation and precipitation data. The attributes we chose to model (drainage area, mean annual precipitation, mean annual flow, probability of perennial flow, channel gradient, active‐channel width and depth, valley‐floor width, valley‐width index, and valley constraint) have demonstrated value for stream research and management. For most of these attributes, field‐measured, and modeled values were highly correlated, yielding confidence in the modeled outputs. The modeled stream network and attributes have been used for a variety of purposes, including mapping riparian areas, identifying headwater streams likely to transport debris flows, and characterizing the potential of streams to provide high‐quality habitat for salmonids. Our framework and models can be adapted and applied to areas where the necessary field and digital data exist or can be obtained.     

Studying soil organic matter using 13C CP-MAS NMR: the effect of soil chemical pre-treatments on spectra quality and representativity

¹³C CP-MAS NMR spectroscopy is a technique that has proved to be useful in studying soil organic matter (SOM). Nevertheless, NMR spectra exhibit a weak signal and have very low resolution due to: the low natural abundance of ¹³C (1.1 % of C) in SOM, the generally low SOM content of soils, and the presence of paramagnetic impurities. This paper studies the effects of soil chemical pre-treatments on ¹³CP-MAS NMR spectra quality and spectra representativity i.e. soil C mass balance.

After chemical pre-treatment to increase total organic carbon (TOC) content and C/Fe ratio, eight soils characterized by different levels of organic carbon content and C/Fe ratios were studied using ¹³CP-MAS NMR. Moreover, where chemical treatments were not applicable due to high carbon losses, the number of ¹³CP-MAS NMR scans was increased in order to obtain satisfactory spectra.

Results show that chemical pre-treatment of soils with C/Fe > 1 caused high C losses. Bulk soils were therefore studied by increasing the number of ¹³CP-MAS NMR scans. Acceptable spectra were obtained from 8K scans (1K = 1024 transient). On the other hand, even when a large number of scan (32K) are used, soil with C/Fe < 1 cannot be studied. As these soils are characterized by low C losses after HCl treatments (range of 2.9–25.4%), a pre-treatment of at least 1.39 mol l⁻¹ HCl removes excess Fe and at the same time increases C/Fe ratio resulting in 32K scans providing good spectra.