查干淖尔生态治理恢复期鸟类调查分析

鸟类是自然环境好坏的重要指示物种。为了解查干淖尔生态治理后的环境效果,2014年8月采用实地调查、文献调查、访谈调查等方法对查干淖尔生态治理效果及其鸟类分布等进行了调查。结果表明,2008年＂查干淖尔干湖盆治理项目＂启动后,鸟类数量逐年增加,查干淖尔生态环境逐步得以恢复。调查期间,共记录到鸟类112种,隶属于17目32科。     

Implementation of Waste Electrical and Electronic Equipment Directive in Finland: Evaluation of the collection network and challenges of the effective WEEE management

Further to the European Waste Electrical and Electronic Equipment (WEEE) Directive, setting up efficient collection schemes is necessary to ensure the recovery targets set. Following the subsidiary principle, the WEEE Directive defines only the general requirements for mandatory collection and recycling objectives. The modalities of the logistics and the organisation of the take-back schemes are left to the choice of Member States. In this paper, the implementation of the WEEE Directive and the development of the WEEE recovery infrastructure in Finland are described and the challenges to the effective management of the WEEE recovery system in Finland are expressed. It can be said that the implementation of the WEEE Directive has succeeded in Finland and, at the same time, the legislative basis has been enacted. In addition, a functional WEEE recovery infrastructure has been built and, the collection requirements of the WEEE Directive have been exceeded in a relatively short time. However, the paper outlines that some inefficient practices still exist, particularly in the registration and WEEE collection stages. It is concluded that raising awareness would lead to a more environmentally sound behaviour and would, ultimately, improve WEEE recovery efficiency.     

Mechanical recycling of EOL concrete into high-grade aggregates

Recycling End of Life (EOL) concrete into high-grade aggregate for new concrete is a challenging prospect for the building sector because of the competing constraints of low recycling process cost and high aggregate product quality. A further complicating factor is that, from the perspective of the environment, there is a strong societal drive to reduce bulk transport of building materials in urban environments, and to apply more in situ recycling technologies for Construction & Demolition Waste. The European C2CA project investigates a combination of smart demolition, grinding of the crushed concrete in an autogenous mill to increase the liberation of cement mortar from the surface of aggregates and a novel dry classification technology called ADR to remove the fines. The feasibility of this recycling process was examined in a demonstration project involving 20,000 tons of EOL concrete from two office towers in Groningen, the Netherlands. Results show that the +4 mm recycled aggregate compares favorably with natural aggregate in terms of workability and the compressive strength of the new concrete, showing 30% higher strength after 7 days.     

镉污染土壤对潜在能源植物生长的影响

利用重金属污染土壤种植能源植物是一种同时解决环境问题和能源问题的新理念,但目前相关研究成果并不多。通过盆栽试验研究人工镉污染土壤中象草Pennisetumpurpureum和亚香茅Cymbopogonnardus两种植物植株的生长状况和两种植物对土壤镉的吸收和富集能力。结果表明,当外源可溶性镉加入到土壤后,其主要是以生物有效性较高的状态存在。土壤镉对象草和亚香茅生长的影响作用有很大的不同,亚香茅比象草具有更强的镉耐受力,其生物量受镉污染影响小。两种植物植株镉含量均随土壤镉添加量的增加而增加。除高镉处理象草外,植物地下部分含镉量比地上部分高很多。高镉处理象草地下部分含镉量比地上部分低的现象可能反映出根系已积累了太多的镉,因而加速了向地上部的转移,从而加剧了植物中毒的程度。赤泥添加剂具有降低土壤酸度,减少植物对镉的吸收和增加象草和亚香茅生物量的作用。     

Fe2+EDTA溶液络合-铁还原脱除烟气中NO

提出了“Fe2 螯合剂络合-铁粉还原-酸吸收”回收法脱除烟气中NO的新工艺,重点研究了模拟烟气中O2体积分数对NO络合量的影响,以及铁粉用量、铁粉粒径、搅拌速度对NO脱除效率的影响,确定了最佳的铁粉脱氮工艺条件,并对铁粉和铁屑的脱氮效果进行了比较。结果表明,烟气中O2的体积分数从0%增加到4.2%,NO络合量下降90.2%;NO脱除效率随铁粉用量和反应器搅拌速度的增加而增加,随铁粉粒径的增加而降低;过程的最佳工艺参数为,铁粉用量0.8g,铁粉粒径≤0.077mm,搅拌速度900r·min-1,在此条件下,对O2体积分数为5%的模拟烟气在搅拌反应器中可取得90%以上的NO脱除效率;用铁粉在1台搅拌反应器中取得的NO脱除效率和用铁屑在2个鼓泡反应器串联时所取得的效率相当。     

对秦皇岛市发展生物质能源产业的思考

秦皇岛市具有丰富的生物质能源资源和种植能源作物等发展能源产业的有利条件,应根据各县区的自然条件和生物质资源状况,科学制定生物质能源产业发展规划,并通过推动技术创新与科技进步、加强宣传引导和政策扶持等措施,促进能源产业的快速、健康发展.     

Validation of a hybrid life-cycle inventory analysis method

The life-cycle inventory analysis step of a life-cycle assessment (LCA) may currently suffer from several limitations, mainly concerned with the use of incomplete and unreliable data sources and methods of assessment. Many past LCA studies have used traditional inventory analysis methods, namely process analysis and input-output analysis. More recently, hybrid inventory analysis methods have been developed, combining these two traditional methods in an attempt to minimise their limitations. In light of recent improvements, these hybrid methods need to be compared and validated, as these too have been considered to have several limitations. This paper evaluates a recently developed hybrid inventory analysis method which aims to improve the limitations of previous methods. It was found that the truncation associated with process analysis can be up to 87%, reflecting the considerable shortcomings in the quantity of process data currently available. Capital inputs were found to account for up to 22% of the total inputs to a particular product. These findings suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependent upon data quality and availability. The use of input-output data assists in improving the system boundary completeness of life-cycle inventories. However, the use of input-output analysis alone does not always provide an accurate model for replacing process data. Further improvements in the quantity of process data currently available are needed to increase the reliability of life-cycle inventories.     

An approach to optimise nutrient management in environmental sanitation systems despite limited data

The material flow analysis method can be used to assess the impact of environmental sanitation systems on resource consumption and environmental pollution. However, given the limited access to reliable data, application of this data-intensive method in developing countries may be difficult. This paper presents an approach allowing to develop material flow models despite limited data availability. Application of an iterative procedure is of key importance: model parameter values should first be assessed on the basis of a literature review and by eliciting expert judgement. If model outputs are not plausible, sensitive input parameters should be reassessed more accurately. Moreover, model parameters can be expressed as probability distributions and variable uncertainty estimated by using Monte Carlo simulation. The impact of environmental sanitation systems on the phosphorus load discharged into surface water in Hanoi, Vietnam, is simulated by applying the proposed approach.     

太阳能污泥干化在欧洲的应用

太阳能污泥干化指的是利用太阳能为主要能源对污水处理厂污泥进行干化和稳定化的污泥处理技术。该技术运用太阳能,借助传统温室干燥工艺,具有低温干化、运行费用低廉、操作简单、运行安全稳定、干化后的污泥仍保留原有的农用价值等特点。该文主要介绍了该工艺的工作原理及流程,工艺设计参数及其与传统热干化技术相比的优缺点,并简要介绍了该工艺在欧洲市场上的商业应用。     

Off-grid: community energy and the pursuit of self-sufficiency in British Columbia's remote and First Nations communities

Remote or off-grid communities in Canada primarily rely on diesel generators for the provision of their electricity. Often surrounded by potential renewable resources, they are characterised as the low-hanging fruit of greenhouse gas mitigation strategies. While much is said about the promises of community energy projects, as well as technologies and policy mechanisms for addressing the needs of these communities, little attention has been paid to what communities, themselves, might want for their energy projects and what the implications of those desires might be for both technology development and community energy policies. This paper aims to fill this gap by exploring the on-going energy pursuits of a number of remote First Nations communities in British Columbia. It identifies a desire for community self-sufficiency as a primary motivation for engaging with energy projects on the part of the communities and discusses the various meanings and implications of self-sufficiency in the context of community energy projects. These meanings and implications primarily include the two dimensions of material self-sufficiency and political self-determination, the latter of which suggests a view of community energy projects as processes of decolonisation among First Nation communities in British Columbia. It then suggests that the pursuit of this goal is somewhat incongruent with the approach that government and industry have taken in addressing community energy, especially the way in which remote communities are viewed as the low-hanging fruit of various sustainability projects.