FMEA and consideration of real work situations for safer design of production systems

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.     

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

Pulling force prediction using neural networks

Purpose. In ergonomics and human factors investigations, pulling force (PF) estimation has usually been achieved using various types of biomechanical models, and independent approximation of PF was done with the help of upper extremity joints. Recently, multiple regression methods have gained importance for task-relevant inputs in predicting PF. Artificial neural networks (ANNs) also play a vital role in fitting the data; however, their use in work-related biomechanics and ergonomics is inadequate. Therefore, the current research aimed to accomplish comparative investigation of ANN and regression models by assessing their capacity to predict PF values. Methods. Multipositional PF data were acquired from 200 subjects at three different handle heights and body locations. ANN and regression models were formed using a random sample of three subsets (75% training, 15% selection, 10% validation) for proving the outcomes. Results. The comparison of ANN and regression models shows that the predictions of ANN models had a profoundly explained variance and lower root mean square difference values for the PF data at three handle heights. Conclusions. These outcomes advise that ANNs offer a precise and robust substitute for regression methods, and should be considered a useful method in biomechanics and ergonomics task assessments.     

The social side of spatial decision support systems: Investigating knowledge integration and learning

Spatial decision support systems (SDSS) represent a step forward in efforts to account for the spatial dimension in environmental decision-making. The aim of SDSS is to help policymakers and practitioners access, interpret and understand information from data, analyses and models, and guide them in identifying possible actions during a decision-making process. Researchers, however, report difficulties in up-take of SDSS by the intended users. Some suggest that this field would benefit from investigation of the social aspects involved in SDSS design, development, testing and use. Borrowing insights from the literature on science-policy interactions, we explore two key social processes: knowledge integration and learning. Using a sample of 36 scientific papers concerning SDSS in relation to environmental issues, we surveyed whether and how the selected papers reported on knowledge integration and learning. We found that while many of the papers mentioned communication and collaboration with prospective user groups or stakeholders, this was seldom underpinned by a coherent methodology for enabling knowledge integration and learning to surface. This appears to have hindered SDSS development and later adoption by intended users.     

基于工效学的高海拔制氧装置制氧效果评价方法研究

目的研究不同制氧装置和供氧方式对装备人员工效的综合影响。方法从不同吸氧方式对高海拔地区装备人员生理、心理、体能和作业效率等方面的改善效果进行研究。结果吸氧后装备人员的血氧饱和度上升到12%左右、心率减缓10%,体力提高5%左右,工作效率提高13%左右。结论高海拔地区吸氧可以提高从总体上提高装备人员的作业能力,长时间持续低浓度吸氧比间隔式高浓度吸氧对人员的生理、体能和工作效率的改善效果更好。     

基于安全人机工程学的楼梯设计

结合安全人机工程学、房屋建筑学等相关知识,在考虑人的生理和心理特征、人—楼梯—环境的综合宜人性的基础上,对建筑的楼梯设计中楼梯类型、踏步宽度、踢面高度、楼梯宽度、踏步防滑、休息台、楼梯坡度、扶手以及楼梯颜色等进行了安全人机工程分析,并提出了楼梯设计的具体要求和建议。     

Update on selective reduction

Over the past 25 years fetal reduction has been utilized to reduce the risks of higher-order multiple pregnancies that have resulted from overly successful infertility therapies. The demographics of multiple pregnancy patients have evolved over the past decade, with increasing proportions coming from IVF as opposed to ovulation induction, being older and a higher proportion with donor eggs. Genetic diagnosis prior to reduction is becoming more common and is very safe in experienced hands. For all starting numbers, including twins, reduction to a lower number of fetuses reduces fetal losses, prematurity, and infant mortality and morbidity. Copyright © 2005 John Wiley & Sons, Ltd.     

Public opinion and interest group positions on open-space issues in Albuquerque,New Mexico,USA: Implications for resource management

The purpose of this research was to elicit and compare the open-space preferences of citizens and openspace experts in Albuquerque, New Mexico, USA. A randomly selected sample of 492 citizens and 35 open-space experts participated in a telephone survey during May 5–18, 1986. The following hypothesis was tested and used as a guideline for the study:HO1: There is no significant difference between respondents' status and preference for open space in Albuquerque, New Mexico.The hypothesis was rejected. Findings confirmed respondents' status affected preference for open space. Of the eight issues on which the citizen and expert groups were compared, five recorded significant differences in response profiles. The open-space expert group was significantly more supportive of using open space to accommodate offroad vehicle facilities, wildlife preserves, a citywide recreational trail, and a trail system along the arroyos and city ditches. The citizen sample was significantly more supportive of using open space to accommodate overnight camping facilities. Both groups equally supported using open space to accommodate an outdoor amphitheater, outdoor education facilities, and rafting, kayaking, and canoeing facilities.The finding indicated that expert preferences did not represent an aggregate of citizen preferences for managing open-space resources. Understanding both expert and citizen positions will facilitate decision-making processes and help resolve environmental disputes.     

A better future for upland landscapes?

The Countryside Commission's report, “A Better Future for the Uplands”, contains recommendations that seek a better balance between conservation and farming and conservation and forestry: recommendations that concern the uplands as landscape. This paper considers the recommendations under three headings — those which seek to reduce conflict, those which seek to reinforce the voluntary approach to conflict resolution, and those which seek to extend control. The paper concludes with a consideration of the likely effectiveness of the measures proposed.