湍流对粉尘云电火花点火过程的影响

随着现代工业的发展,粉尘爆炸事故发生的频率也逐年增加,因此,对粉尘云点火敏感程度进行测量和计算就变得十分重要。粉尘云最小点火能是粉尘爆炸重要的特性参数之一,是采取粉尘爆炸防护的基础。最小点火能在测量的过程中受到多个敏感条件的影响,其中湍流则是最复杂的影响因素之一。文中对实验过程中粉尘云的湍流进行了定义,并分析了湍流对粉尘云最小点火能影响的内在原因;同时对通过数值模拟计算粉尘云最小点火能过程中的湍流计算给出了数学模型。从实验和数学模型两个方向对湍流进行了全面描述,对粉尘云电火花点火过程中湍流影响的分析结论,可有效的指导实验。     

基于两相流模型数值研究可燃颗粒燃烧爆轰的特性

粉尘爆炸是工业爆炸灾害的重要形式。建立可燃颗粒非均相系统的燃烧爆轰模型,基于Eulerian-Eulerian数值描述方法,采取有限差分方法编制非均相系统燃烧和爆轰发展的数值模拟程序,对封闭空间内两相非定常爆轰过程进行研究。数值分析可燃颗粒尺度、颗粒浓度对非均相系统燃烧、爆轰特性的影响。结果表明:在一定的范围内,当可燃颗粒的体积分数为10%,粒径0.5mm时,流场的燃烧爆轰效应最强。即10.6ms时刻,流场压力值达到28MPa,温度高达2600K,颗粒燃烧效率最高。     

旬东煤矿井下永久避难硐室构建研究

避难硐室的构建研究对硐室安全避险功能的实现具有重要意义。根据旬东井下人员分布及巷道布置情况,确定利用4-2采煤区现有巷道构建100人规模永久避难硐室;根据巷道尺寸、人均面积及设备体积等,计算得硐室有效宽度为4.6m,高度为3.5m,总长度为63.4m,人均面积为1.2m2;通过气密试验,测定0.135MPa避险区内外压差可达1980Pa;通过分析人员避险需求,确定旬东永久避难硐室生命保障系统由防火防爆系统、密闭缓冲系统、气幕隔绝系统、供氧系统、制冷除湿系统及附属系统组成。     

电梯门区故障案例软件研发及其风险研究

电梯门区故障是电梯整体主要故障之一。基于目前电梯门区常见故障或者已经发生的事故,本文系统性地建立电梯门区故障案例库并进行其软件研发;根据故障案例库中已知的案例信息得到故障类型风险的相关信息,进行风险分析;将故障案例中实际出现的故障类型组合种类归纳后,计算出每种组合的危害程度,按照危害程度值进行降序排列;软件系统根据用户输入的设备信息给出风险较高的故障组合和相应的预防措施。     

Dynamic approach to risk management: Application to the Hoeganaes metal dust accidents

Several major accidents caused by metal dusts were recorded in the past few years. For instance, in 2011, three accidents caused by iron dust killed five workers at the Hoeganaes Corp. facility in Gallatin, Tennessee (USA). In order to prevent such accidents, a dynamic approach to risk management was defined in this study. The method is able to take into account new risk notions and early warnings and to systematically update the related risk. It may be applied not only in the design phase of a system, but also throughout the system lifetime as a support to a more precise and robust decision making process. The synergy of two specific techniques for hazard identification and risk assessment was obtained: the Dynamic Procedure for Atypical Scenarios Identification (DyPASI) and the Dynamic Risk Assessment (DRA) methods. To demonstrate its effectiveness, this approach was applied to the analysis of Gallatin metal dust accidents. The application allowed collecting a number of risk notions related to the plant, equipment and materials used. The analysis of risk notions by means of this dynamic approach could have led to enhanced hazard identification and dynamic real-time risk assessment. However, the approach described is effective only if associated to a proper safety culture, in order to produce an appropriate and robust decision making response to emerging risk issues.     

Quantitative risk analysis of fire and explosion on the top-side LNG-liquefaction process of LNG-FPSO

Since the massive use and production of fuel oil and natural gas, the excavating locations of buried energy-carrying material are moving further away from onshore, eventually requiring floating production systems like floating production, storage and offloading (FPSO). Among those platforms, LNG-FPSO will play a leading role to satisfy the global demands for the natural gas in near future; the LNG-FPSO system is designed to deal with all the LNG processing activities, near the gas field. However, even a single disaster on an offshore plant would put the whole business into danger. In this research, the risk of fire and explosion in the LNG-FPSO is assessed by quantitative risk analysis, including frequency and consequence analyses, focusing on the LNG liquefaction process (DMR cycle). The consequence analysis is modeled by using a popular analysis tool PHAST. To assess the risk of this system, 5 release model scenarios are set for the LNG and refrigerant leakages from valves, selected as the most probable scenarios causing fire and explosion. From the results, it is found that the introduction of additional protection methods to reduce the effect of fire and explosion under ALARP criteria is not required, and two cases of the selection of independent protection layers are recommended to meet the SIL level of failure rate for safer design and operation in the offshore environment.     

Experimental study on the suppression of gas explosion using the gas–solid suppressant of CO2/ABC powder

Gas explosion is the leading accident in underground coal mining in China. Using the self-improved 20 L spherical experimental system, the impacts of 8% CO₂, ABC powder at various concentrations and mixture of them on the suppression of mine gas explosion were investigated. The results indicate that cooperative synergism exists between ABC powder and CO₂. Their combination has a better effect than each of the two components acting alone, especially for the gas of larger concentration. When 0.25 g/L ABC powder was mixed with 8% CO₂, the explosion limits were reduced by about 55%, the time to reach the peak explosion pressure was prolonged 3.56 times on average. Meanwhile, the maximum explosion pressure declined on an average of 59.4% and the maximum explosion overpressure rising rate decreased on an average of 91.1%. A combination of 0.20 g/L ABC powder and 8% CO₂ completely suppressed 11% gas explosion. The explosion suppression mechanism of CO₂ and ABC powder were probed theoretically. CO₂ plays a key part in the whole explosion processes, and it can effectively suppress the forward reaction between gas and oxygen. While it is during the middle-later period of explosion processes that ABC powder plays a critical role. The particles decomposed from heated ABC powder such as nitrogen and phosphor will react with free radicals rapidly. Besides, atoms as N, P are capable of participating in chain reaction and reacting with active groups, significantly suppressing the gas explosion.     

基于20L球形爆炸装置的甲烷煤尘混合爆炸实验

利用实验室自行设计的20L球形爆炸装置,对煤尘及甲烷煤尘混合物的爆炸特性进行了研究。结果表明:无论有无甲烷,煤尘的最大爆炸压力随煤尘浓度增加呈现先升高后降低的变化趋势,并且均在在煤尘浓度为600g/m3时均达到最大值。同时,甲烷的加入明显提高了煤尘最大爆炸压力值,而且随着甲烷浓度的增加,最大爆炸压力增幅先增加后降低,在甲烷5%时增幅最大。煤尘的爆炸持续时间随煤尘浓度增加呈现先降低后升高的特点,甲烷存在时有同样规律,但是有甲烷时爆炸持续时间明显降低,而且随着甲烷含量的增加,煤尘的爆炸持续时间降低幅度不断增加,在甲烷5%以后趋于稳定。实验结果对生产实践有一定的指导作用。     

水平管道内障碍物数量对瓦斯爆炸过程的影响研究

为了研究水平管道内障碍物数量对瓦斯爆炸的影响,利用自制的水平管道式气体爆炸试验装置,选用阻塞率为60%的圆环型障碍物,在常温常压下对管道内障碍物数量分别为1片、3片、5片和7片时瓦斯(试验气体为甲烷与空气的混合物,下同)爆炸过程进行试验研究。结果表明:瓦斯的爆炸压力及其上升速率均随障碍物数量的增加呈先增后减的变化规律,而火焰传播速度则随着障碍物数量的增加单调递增,但递增幅度逐渐减小。在密闭置障管道内瓦斯的爆炸压力及其上升速率随测试位置长径比的增大先减小后增大,而火焰传播速度则随测试位置长径比的增大单调递减。     

气瓶内附油脂充氧过程爆炸实际油脂量计算

通过热力学计算,充氧12 MPa时,导致氧气瓶爆炸需要的最小油脂量为66.4~79.6 g。同一气瓶在不同的充装压力下发生爆炸,所需要的最小油脂放热量不同,即所需要的油脂量不同。同一气瓶充装压力越高,瓶内的气体压缩能越高,导致气瓶爆炸所需要的最小油脂量就越少。实际求解碎片运动的动力学方程,得到碎片的初动能Ek,并推断气瓶实际爆炸能量。