基于最小能量原理的平衡图调节法在矿井通风系统优化中的应用

根据最小能量原理,采用平衡图调节法解决矿井通风网络中风压不平衡的问题,建立矿井通风网络优化模型。根据矿山基本情况和平衡图原理绘制出通风网络"平衡图",采用不同的变换方法使得"平衡图"真正达到平衡,进而得出不同的优化调节方案,并进行风压平衡的验证。应用最小能量原理选出能耗最低的调节方案。并且,运用基于最小能量原理的平衡图调节法解决了矿山的实际问题,结果表明,运用该方法能形象直观地反映出风量、风压及功率之间的关系,在解决通风网络中风压不平衡问题的同时,既形象直观,又使得经济费用最低,保证矿山安全高效生产。     

井下采煤影响矿区坡面形态及侵蚀的数值模拟分析

针对井下采煤产生的大范围岩移必然最终改变原有地表形态并影响坡面侵蚀特征及规律这一特殊性,从井下与地表相结合的新视角,结合彬长矿区水土流失特征和典型煤矿采矿条件,以采厚、地表坡面坡度等因素为变量,构建了20个不同类型的数值模型,通过数值模拟方法研究并揭示井下采煤对地表坡面形态及侵蚀的影响规律。结果表明,第一,地表坡面坡度会随采厚增加而呈现增大的趋势,且自然坡度越大,坡度变化量越大;相同采厚条件下,坡度增大率与坡面自然坡度整体上呈负相关。第二,地表坡面坡长会随采厚增加而呈现减小的趋势,且自然坡度越小,坡长变化量越大;随采厚增加,地表坡面坡长减小率与自然坡度呈先正相关后负相关的关系,自然坡度为26.57°是拐点。第三,采厚的增加会提高地表坡面产流产沙的强度,加剧坡面侵蚀,这种效应在坡度较小的坡面更加显著;井下采煤引起地表坡面坡度的增大是产生这一规律的主因。     

Trends in occupational injuries and fatality in Turkey

Introduction. The aim of this study was to evaluate the trend of occupational injuries in Turkey using epidemiologic criteria such as incidence mortality and fatality/all injuries recorded – rates. Materials and methods. Safety and health data were obtained from the Annual Statistic Books of the Social Insurance Institution (1988–2006) and Social Security Institution (2007–2011) of Turkey. Results. The results from the official data showed that although total employment is increasing the number of occupational injuries and incidence and mortality rates are decreasing. The results also demonstrate that occupational fatality/all injuries recorded – rate is increasing. The fatality/all injuries recorded – rate per 1000 injuries increased to 25.5 in 2011 from 8.6 in 1988. Each work day an average of five people died because of occupational injuries. Discussion and conclusions. The fatality/all injuries recorded – rate (the number of fatal cases per 1000 occupational injuries) is an important indicator of the injury rate for a country. Systems of occupational injury and illness surveillance constitute a critical resource for the management and reduction of occupational injuries and illness.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.     

Underground parallel pipelines domino effect: An analysis based on pipeline crater models and historical accidents

This paper focuses on the analysis of the possibility of domino effect in underground parallel pipelines relying on historical accident data and pipeline crater models. An underground pipeline can be considered as safe following an accident with an adjacent gas or liquefied pipeline when it remains outside the ground crater generated. In order to prevent the domino effect in these cases, the design of parallel pipelines has to consider adequate pipeline separations based on the crater width, which is one of the widely used methods in engineering applications. The objective of this work is the analysis of underground petroleum product pipelines ruptures with the formation of a ground crater as well as the evaluation of possible domino effects in these cases. A detailed literature survey has been carried out to review existing crater models along with a historical analysis of past accidents. A FORTRAN code has been implemented to assess the performance of the Gasunie, the Batelle and the Advantica crater models. In addition to this, a novel Accident-Based crater model has been presented, which allows the prediction of the crater width as a function of the relevant design pipeline parameters as well as the soil density. Modifications have also been made to the Batelle and Accident-Based models in order to overcome the underestimation of the crater width. The calculated crater widths have been compared with real accident data and the performance evaluation showed that the proposed Accident-Based model has a better performance compared to other models studied in this work. The analysis of forty-eight past accidents indicated a major potential of underground parallel pipelines domino effect which is proven by two real cases taken from the literature. Relying on the investigated accidents, the crater width was smaller than or equal to 20 m in most cases indicating that the definition of underground pipeline separations at around 10 m would be sufficient to ensure a small probability of the domino effect.     

Retrospective future proofing of a copper mine: Quantification of errors and omissions in ‘As-built’ documentation

The electrical instrumentation control systems (EICS) ‘As-built’ documentations of a copper mine were found to possess a significant errors and omissions, which hindered the asset owner’s ability to undertake effective and efficient operations and maintenance. A Systems Information Model (SIM) was used to retrospectively create a connected system to ensure all physical equipment and the associated connections that were constructed are modelled in an object-orientated database. In creating the SIM, the existing errors and omissions in the ‘As-built’ documentation were quantified, and cost savings that could be achieved for a future planned copper mine, with a similar design, were identified. The limitations of using conventional computer-aided-design (CAD) to design and document EICS are discussed. It is recommended that retrospectively creating a SIM can provide owners and operators with significant productivity benefits as well as ensure the asset’s integrity. The case study presented provides asset owners and operators with the empirical evidence to challenge conventional thinking surrounding the design, engineering and documentation of EICS using CAD and alternatively consider the use of SIM.     

煤矸石堆场Fe、Mn迁移累积效应研究

通过对贵州织金典型煤矿区矸石堆场周边地表水体及耕地进行调查与采样分析,探讨了煤矸石堆场Fe、Mn元素迁移对周边地表水体及耕地累积效应的影响。研究结果表明:受煤矸石堆场酸性排水的影响,煤矸石堆场周边溪沟水Fe、Mn含量分别达0.81~32.14mg/L、1.17~8.42mg/L,超过"集中式生活饮用水地表水源地标准"限值的3~107、12~84倍。堆场周边旱作土中Fe、Mn含量分别达63 530~85 990mg/kg、243.1~910.1mg/kg,水稻土达46 940~75 810mg/kg、144.5~409.1mg/kg,Fe、Mn累积指数旱作土分别达1.61、2.97,水稻土分别达1.24、1.33。随着与堆场距离的增大,水稻土Fe、Mn含量逐步降低,在500m范围内Fe降低了35%,Mn降低了61%,而旱作土变化规律不明显。     

氧化亚铁硫杆菌生物浸出铅锌硫化矿尾矿及浸出过程中重金属形态分析研究

研究嗜酸性氧化亚铁硫杆菌(Acidithiobacillus ferrooxidans,A.f)对铅锌硫化矿尾矿重金属离子的生物浸出和重金属形态变化有助于了解生物浸出作用的过程变化.通过考察生物浸出体系中不同的矿浆浓度对pH值和浸出尾矿重金属的影响,探究生物浸出过程的重金属形态变化情况.结果表明,生物浸出作用对pH值和尾矿重金属的浸出影响巨大,随着矿浆浓度的增加,pH值下降速率呈现先升高后降低、重金属浸出率也呈现先增加后降低的趋势,最佳的生物浸出矿浆浓度为50 g·L~(-1),Fe和Zn的最佳浸出率分别为85.45%和97.85%.重金属形态分析表明,生物浸出作用对尾矿重金属形态变化产生巨大的影响,随着浸出时间的延长,重金属形态逐渐改变,首先易迁移的重金属被生物浸出,然后稳定的重金属也逐渐被生物浸出.     

煤炭开采对生态系统功能的胁迫作用:模型·实证

为研究煤炭开采对生态系统功能的胁迫作用,基于系统动力学原理构建一般情况下煤炭开采对生态系统功能胁迫作用的系统动力学模型,分析不同情境下煤炭开采对生态系统功能的胁迫作用特征,并以淮河流域典型煤炭资源型城市——淮南市为例进行实证研究. 结果表明:煤炭开采对生态系统功能有胁迫作用,政府是重要影响因素;不同情境下煤炭开采对生态系统功能的胁迫作用不同,表现为情境一(理想状态)<情境二(良性状态)<情境三(一般状态)<情境四(停滞状态)<情境五(糟糕状态);生态治理投资系数和煤炭开采技术投资系数的比值越大,则煤炭开采对生态系统功能的胁迫作用越小. 实证结果通过有效性检验,表明该研究建立的系统动力学模型具有可靠性. 当前淮南市生态治理投资和煤炭开采技术投资的比值为0.511,表明淮南市生态系统功能系统和煤炭开采系统处于一般状态. 研究显示,政府在维持生态系统功能稳态中发挥着一定作用. 煤炭开采对生态系统功能的胁迫作用特征:当生态治理投资系数和煤炭开采技术投资系数的比值为0时,生态系统功能系统和煤炭开采系统处于糟糕状态;当比值为(0,1)时,处于一般状态;当比值为1时,处于良性状态;当比值大于1时,两大系统进入理想状态.      

粉煤灰-铝土矿改性制备铝铁复合混凝剂的除磷性能及混凝机理研究

化学混凝法是城市污水处理深度除磷的有效方法,目前常用混凝剂主要存在成本高、除磷效率低且用量大等缺点.本研究采用常压酸浸法,以低成本的铝土矿和粉煤灰为主要原料制备无机复合混凝剂,并对其进行除磷应用及机理研究,结果表明:1自制混凝剂对生活污水中TP去除率达99.58%,出水TP含量为0.012 mg·L-1,优于GB18918—2002一级A标准.2 X-射线衍射和红外光谱结果显示,混凝剂中的Fe—OH、Al—OH、H—OH等基团能与水中的磷酸根作用生成沉淀达到除磷目的,该沉淀在沉降过程中还能吸附不易沉淀的含磷悬浮物,发挥网捕卷扫作用.3采用Ferron逐时络合比色法分析铝铁形态结果显示,混凝剂含有64.14%低聚态铝铁,能中和水中胶体的表面电荷致使胶体脱稳;11.27%中聚态铝铁可吸附在胶体表面,降低其表面电荷,同时以较高的分子量发挥吸附架桥作用;24.59%高聚态铝铁在沉淀过程中可包夹部分胶体粒子,以较大表面积发挥卷扫作用.4分形维数研究结果显示,絮体分形维数在1.2~2.8之间,分形特征较好,能有效发挥絮体的吸附架桥作用.5 Zeta电位分析结果显示,混凝剂本身带正电荷,能与水中带负电荷的胶体物质发生中和,从而压缩双电子层,使胶体粒子脱稳而从水中去除.混凝剂除磷过程是压缩双电层、电中和、吸附架桥和网捕卷扫多种机制共同作用的动态变化过程.