CE-QUAL-W2模型在上海市大型饮用水水库中的应用

通过二维纵向横向平均水动力学和水质模型（CE-QUAL-W2模型）来模拟上海大型饮用水水库的水质状况。模型初步模拟了该水库中不同深度水层的水质状况,使用2011年1月到2011年11月单月（包含一年四季代表性）的数据对模型主要参数进行校正。结果显示,水质状况的模型计算值与实测值比较接近,与实际情况较吻合,AME和RMS值较好,预测该水库的水质是Ⅰ～Ⅱ类。通过本文对该（CE-QUAL-W2模型）的应用得出的结果显示,该模型也适合模拟一些具有湖泊特性的河流,尤其适用于对水体的水质评估。     

深埋岛式地铁车站突发事件时人员疏散模拟研究

在地铁安全性分析中,人员安全疏散是一个关键的考核指标。笔者首先介绍基于规范的人员疏散设计、基于火灾工程学的性能化人员疏散设计思路及计算方法;以某市轨道交通S号线深埋车站为系统原型,通过人员疏散动力学模型对深埋车站的人员疏散过程(1 200人)进行计算机模拟;研究突发事件时,深埋站点内人员能否安全疏散。     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.     

储油罐区防火堤受力情况分析

利用ANSYS有限元分析软件,对防火堤受液态物质冲击时受力状况进行模拟,并对防火堤在冲击载荷下的受力情况进行了分析,指出防火堤在事故状态下的脆弱部分,对油库的安全设计、评价和日常维护具有参考价值。     

Large eddy simulation and experimental study of the effect of wire mesh on flame behaviours of methane/air explosions in a semi-confined pipe

Preventing the propagation of flames in a pipeline is an effective measure for avoiding gas explosion accidents and reducing losses. To evaluate the effect of wire mesh, acting as a porous media, experimental and simulation studies are conducted to determine the influence of the wire mesh on the dynamics of premixed methane/air flame propagation in a semi-closed pipe. Four different kinds of wire mesh with different numbers of layers are chosen in the experiments and simulation, and the mechanism of wire mesh quenching of the flame is investigated. The experimental and simulation results are consistent. Flames are quenched when 4 layers of 40-mesh or 3 layers of 60-mesh wire mesh are used; however, once the flame propagates through the wire mesh, the risk of methane combustion may increase. The wire mesh becomes the key factor causing flame folds and acceleration, and the greater the number of layers or the larger the mesh size is, the more obvious the folds after the flame passes through the wire mesh. Moreover, the combination of heat absorption and disruption of the continuous flame surface by the mesh causes flame quenching. Wire mesh can effectively attenuate the flame temperature during premixed flame propagation in a pipe, and the attenuated maximum rate reaches approximately 79% in the case of adding 3 layers of 60-mesh wire mesh.     

长江河口硅和磷生源要素质量浓度的变化特征

根据近年来长江河口区域内大通水文站的记录和近期在长江入海河口区上海段多个采样点的生源要素质量浓度实测数据,比较水中可溶性硅酸盐和磷酸盐的质量浓度,分析在长江入海河口区水中硅和磷元素含量的主要变化特征.结果表明,长江水中的硅酸盐和磷酸盐从长江入海河口进入大海的过程中,其质量浓度有降低的趋势,它们在长江入海河口的多年的质量浓度变化趋势是相反的.长江入海河口区域上游的磷酸盐质量浓度升高幅度较大,而硅酸盐变化不大,硅酸盐、磷酸盐质量浓度在长江河口区进入海洋的过程中迅速降低.      

街道峡谷内汽车排放污染物浓度分布的观测与数值模拟

在上海某典型街道峡谷内按一定的空间布点,在一定时段内同时对各布点进行采样并做一氧化碳浓度分析,同时记录车辆种类、车流量、气象条件等,分析街道峡谷内污染物浓度的分布.运用风向频率加权(WDFW)方法,结合大气流动和污染物扩散的CFD模型进行数值模拟计算.结果表明,数值模拟结果和现场观测结果较吻合,建筑物低的一侧污染物浓度远高于建筑物高的一侧污染物浓度,两侧的污染物浓度随着高度的增加而降低.     

Assessing the Effects of Alternative Setback Channel Constraint Scenarios Employing a River Meander Migration Model

River channel migration and cutoff events within large river riparian corridors create heterogeneous and biologically diverse landscapes. However, channel stabilization (riprap and levees) impede the formation and maintenance of riparian areas. These impacts can be mitigated by setting channel constraints away from the channel. Using a meander migration model to measure land affected, we examined the relationship between setback distance and riparian and off-channel aquatic habitat formation on a 28-km reach of the Sacramento River, California, USA. We simulated 100 years of channel migration and cutoff events using 11 setback scenarios: 1 with existing riprap and 10 assuming setback constraints from about 0.5 to 4 bankfull channel widths (bankfull width: 235 m) from the channel. The percentage of land reworked by the river in 100 years relative to current (riprap) conditions ranged from 172% for the 100-m constraint setback scenario to 790% for the 800-m scenario. Three basic patterns occur as the setback distance increases due to different migration and cutoff dynamics: complete restriction of cutoffs, partial restriction of cutoffs, and no restriction of cutoffs. Complete cutoff restriction occurred at distances less than about one bankfull channel width (235 m), and no cutoff restriction occurred at distances greater than about three bankfull widths (∼700 m). Managing for point bars alone allows the setbacks to be narrower than managing for cutoffs and aquatic habitat. Results suggest that site-specific “restriction of cutoff” thresholds can be identified to optimize habitat benefits versus cost of acquired land along rivers affected by migration processes.     

我国典型土壤对病毒等温静态吸附的数值模拟

通过室内等温静态批量平衡吸附实验,采用3种常见的等温线（Freundlich方程、Langmuir方程和Temkin方程）对2种病毒（MS2和X174）在2种处理（非灭菌和灭菌）条件下的6种土壤（红壤土、红粘土、乌栅土、黄泥土、沙质潮土和壤质潮土）中的吸附行为进行了回归拟合.实验结果和模拟结果均表明,土壤性质、病毒性质、土壤中的土著微生物对病毒在土壤中吸附行为均具有重要的影响.红粘土对MS2和X174的平均吸附比例几乎能达到100％,而2种潮土（沙质潮土和壤质潮土）相对较弱;总体来看土壤对X174的吸附能力高于MS2,但灭菌后的土壤对MS2的吸附能力却高于X174.在数值模拟中,Freundlich方程和Langmuir方程均具有理想的相关性.Freundlich方程能够表现出病毒浓度对其在土壤中吸附行为的影响;尽管Langmuir方程能够应用于土壤对病毒吸附能力的比较,但本研究中不能应用Langmuir方程来计算土壤对病毒的最大吸附量.     

基于WARMF模型的杭埠-丰乐河流域水文模拟研究

研究了WARMF模型在杭埠-丰乐河流域(巢湖流域最大支流)的水文模拟适应性能并进行了流域水文系统分析.利用AVSWAT2000模型将流域划分为37个子流域,利用流域地貌-土壤分布对应关系、土壤剖面结构、地下水位埋深等条件,确定了子流域的平面分组与剖面土层结构,较大程度上降低了流域模型参数校准的难度与不确定性.利用2000～2003年的水文观测数据,在参数灵敏度分析基础上,对模型水文参数进行了校准与检验.结果表明,WARMF在研究区具有较好的适应性能.WARMF模型与AVSWAT2000模型的水文模拟结果对比表明,WARMF模型具有更好的日拟合性能.基于模型的模拟结果,在空间尺度上定量分析了流域从降水开始到入湖的水循环过程,在时间尺度上分析了年内降雨、径流的分布及其对应关系.流域概化、模型的校准与检验以及流域水文时空变化的系统分析方法等对流域水文、环境的模拟研究与系统分析具有探索意义.