Improved models of failure time for atmospheric tanks under the coupling effect of multiple pool fires

Fire accidents of chemical installations may cause domino effects in atmospheric tank farms, where a large amount of hazardous substances are stored or processed. Pool fire is a major form of fire accidents, and the thermal radiation from pool fire is the primary hazard of domino accidents. The coupling of multiple pool fires is a realistic and important accident phenomenon that enhances the propagation of domino accidents. However, previous research has mostly focused on the escalation of domino accidents induced by a single pool fire. To overcome the drawback, in this study, the failure of a storage tank under the coupling effect of multiple pool fires was studied in view of spatial and temporal synergistic process. The historical accident statistics indicated that the accident scenario of two-pool fires accounted for 30.6% in pool fires. The domino accident scenario involving three tanks is analyzed, and the typical layout of tanks is isosceles right triangle based on Chinese standard “GB50341-2014”. The thermal response and damage of a target tank heated by pool fires were numerically investigated. The volume of 500 m³, 3000 m³, 5000 m³ and 10000 m³ were selected. Flame temperature was obtained by FDS, and then was input onto the finite element model. The temperature field and stress field of target tanks were simulated by ABAQUS. The results showed that the temperature rise rate of the target tanks under multiple pool fires was higher than that under a single pool fire. The failure time of the tank under the coupling effect of multiple fires was lower than that under the superposition of multiple fires without the first stage. The stress and yield strength were compared to judge the failure of the target tank. The model of failure time for the tank under the coupling effect of pool fires was established. Through the verification, the deviation of this model is 4.02%, which is better than the deviation of 15.76% with Cozzani's model.     

Experimental study on fire suppression performance of the high pressure water mist in the engine room of an offshore platform

The total flooding application water mist system is a new type of environmentally-friendly fixed extinguishing system. The optimizing design can improve its fire extinguishing performance. At present, the water mist fire extinguishing system in the engine room of the offshore deepwater semi-submersible support platform has not attracted sufficient attention. In this paper, the water mist in the engine room of a deepwater semi-submersible support platform was studied. It contains the effect of water mist on the heat absorption and oxygen insulation of diesel pool fires. The applicable parameters of the water mist fire extinguishing system were also determined. Moreover, based on the shielding of the fire source in the engine room and the different requirements for water mist extinguishing parameters, a hierarchical multi-parameter combined high-pressure water mist fire extinguishing system was proposed. In the full-scale experimental engine room model, according to the fire extinguishing experiments for diesel pool fires with different areas, this kind of hierarchical multi-parameter water mist system is very effective on shielded and non-shielded fires. In addition, it is still effective even in a non-closed environment coupled with smoke exhausting.     

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Sodium is the main cooling medium in the circuit of fourth-generation nuclear reactors, and its leakage constitutes a severe fire hazard because of its high chemical activity. In this study, expandable graphite (EG), which is a traditional sodium fire-extinguishing agent, was modified with zinc borate (ZB) as an intercalator, and the modified EG_ZB was characterized. Moreover, the effectiveness of the modified EG_ZB in extinguishing sodium fires was tested using a self-developed fire-extinguishing experimental device. This study's results indicated that EG, EG_ZB had a smaller particle size, higher thermal stability, higher fire-extinguishing speed, and lower powder mass consumption than EG. During the fire-extinguishing process, ZnO decomposed by ZB captured free radicals and inhibited the combustion reaction. Furthermore, B₂O₃ was adsorbed on the surface of the EG layer, which strengthened covering and asphyxiation. The findings of this study provide crucial information for effectively controlling fires caused by active metals and metallo-organic compounds.     

煤矿火灾烟气流动传播过程仿真研究

煤矿发生火灾后会生成大量有毒气体并产生火风压,烟气在火灾动力的影响下出现状态紊乱,研究煤矿火灾烟气流动传播过程对控制火情有着重要意义。基于国内外研究现状,对燃烧及风流特点进行分析,建立了煤矿火灾烟气流动数学模型,并利用CFD软件进行仿真。研究表明:无通风工况下的烟气为对称流动;随着风速增加,出口处温度降低,烟气向风流入口处的流速减小。     

自供电方式的输气站发电机房火险管理

结合涩宁兰输气管道涩北首站实际情况,就发电机房发生火灾事故后的应急反应程序进行了详细论证,提出了具体的火灾防范措施和改进需求,对基于自供电输气场站的发电机房火灾事故应急工作提供了参考.     

浅谈脱硫系统的防火设计

火灾报警及消防系统是人身、设备安全的重要保证.针对脱硫系统的具体实际,对火灾报警及消防系统设计进行了探讨,并给出一定的设计参考意见.     

饮食业油烟道火灾的模糊事件树分析

对饮食业油烟道火灾事故进行事件树分析时,历史数据的缺乏常常导致无法进行事件序列的定量计算.针对这一问题,利用专家对事故的模糊评判,引入模糊事件树进行定量计算研究.在模糊集理论的基础上,结合德尔菲法和判断矩阵法, 将模糊性语言转换为三角模糊数或梯形模糊数,应用模糊数截集以及模糊数清晰化方法,对后果事件发生概率进行计算.研究表明,饮食业油烟道火灾事故概率的模糊事件树分析是切实可行的,有助对饮食业油烟道火灾的认识、预防和扑救工作.     

纵向通风下坡度隧道火灾烟气特性数值模拟研究

为探讨纵向通风情况下坡度隧道火灾烟气的温度分布、回流长度等特性参数,运用火灾动力学模拟软件FDS建立一个长为500 m的公路隧道模型,对不同坡度、不同纵向通风速率的20组火灾工况进行模拟研究,通过分析各工况的模拟结果,并结合前人在隧道火灾烟气特性研究方面的成果,得到火灾情况下隧道内烟气的纵向温度分布规律、隧道拱顶温度变化规律、温度偏移及烟气回流长度变化规律等。     

The effect of barriers on reducing thermal heat fluxes from a hydrocarbon pool fire

The radiant heat flux from a pool fire is frequently calculated using the solid flame model, where the flame envelope is approximated as a stationary cylinder whose surface emits thermal radiation at a constant rate. Radiant heat flux calculations using the solid flame model assume the target to be at a given elevation, typically at ground level, and to have an unobstructed view of the fire. The presence of obstacles (e.g., walls, buildings, etc.) or terrain features that would create shaded areas and provide shielding of a target from the fire is typically neglected in these calculations: this is a conservative approach, but it is not accurate. This paper presents a methodology to utilize the solid flame model to calculate the heat flux to a target while taking into account the presence of an obstruction between the target and the fire. The shielded solid flame method can quantitatively account for the presence of obstacles as a passive mitigation measure and allows project developers or designers to optimize their facility layout to meet safety requirements. The methodology presented in this paper uses the same correlations found in currently used solid flame models (e.g., LNGFIRE3), therefore, it remains consistent with current regulatory requirements for LNG facilities in the U.S.     

大空间火灾烟气流动的动态显示研究

讨论了火灾烟气流动过程的计算机动态模拟方法。利用Ｄｅｌｐｈｉ可视化编程工具,建立了一个融区域模拟计算和计算机动态显示于一体的火灾发展的模拟软件,并以中国科技大学的大空间建筑火灾实验厅为对象,对典型火灾羽流及烟气层的发展过程进行了动态显示。