芳纶在阻燃防护服中的应用及检测

本文介绍了间位芳纶和对位芳纶的性能,并对利用其性能制作的阻燃防护服进行了检测。     

芳纶1313纤维的特点及其在个体防护服装领域的应用

对芳纶1313纤维的发展历程、性能特点、生产加工、产品应用等各个方面进行了详细的阐述。芳纶1313纤维是一种性能优异的阻燃耐热纤维,在安全生产领域有着广阔的应用前景。自问世以来历经半个多世纪的发展,其在安全生产领域的应用价值已经得到广泛的认可。由于芳纶1313纤维具备一系列的突出优点,同时也存在某些缺陷,因此建议扬长避短,充分发挥这种纤维的种种优点,同时通过纤维改性、改进和优化生产工艺等方法,充分发挥其在安全生产领域的应用,使之产生应有的社会效益和经济效益。     

超高效液相色谱-串联质谱法测定污水中14种有机磷酸酯阻燃剂

建立了超高效液相色谱-串联质谱(UPLC-MS/MS)联用法同时测定污水中14种有机磷酸酯阻燃剂(OPEs)的分析方法.样品采集后,经GF/C膜过滤,HLB固相萃取小柱净化后进样分析.以BEH C18色谱柱为分离柱,乙腈和水混合液为流动相(0.2 mL min-1)梯度洗脱,15 min内可完成14种OPEs的分离.在电喷雾正离子模式下,采用多反应监测模式(MRM)进行质谱测定.在加标浓度为1.0μg·L-1时,14种OPEs在污水处理厂进水和出水中的回收率分别为52.1%—119%、43.6%—114%,相对标准偏差(RSD)分别为1.2%—16.2%、0.4%—9.2%,方法的检出限(LOD)在0.3—6.0 ng·L-1间.方法精密度好,准确度高,可满足同时对污水样品中的14种OPEs进行定性及定量分析的要求.     

移动电极电除尘器除尘效率的计算

移动电极静电除尘器通过清灰刷除掉阳极板上收集的粉尘,阳极系统为移动电极（即作回转运动的集尘极）阳极板呈带条状,固定在链条上,随链轮转动。移动电极静电除尘器有效克服了困扰常规电除尘器对高比电阻粉尘的反电晕及振打二次扬尘等问题,大幅度提高了除尘效率。提供常规固定电极除尘区与移动电极除尘区联合使用的除尘器除尘效率计算公式。     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Determination of cobalt by air-assisted liquid–liquid microextraction

Abstract

A rapid and selective technique for extraction, preconcentration and determination of trace amounts of cobalt in water and pharmaceutical samples by air-assisted liquid–liquid microextraction combined with flame atomic absorption spectrometry is proposed. 1-Nitroso-2-naphthol is used as a complexing agent and 1-octanol as an extraction solvent. Parameters relevant for analytical effectivity, i.e. pH of sample solution, concentration of complexing agent, volume of extraction solvent, and number of extraction cycles are optimized using a Box–Behnken design. At optimum conditions, a dynamic linear range of 5–600?µg L^?1 is obtained, with a limit of detection of 1.2?µg L^?1. The method is used for determination of Co(II) in environmental water and pharmaceutical samples.     

Hazardous halogenated substances formed during combustion processes

The results of the emissions from combustion processes and/or from fire accidents show the risk to man and his environment and thus the need for strict legislation and critical analysis of unwanted compounds. These substances or their thermolysis products are often due to incomplete combustion or may result from the interaction of various substances.

In the following we report the formation of octachlorostyrene (OCS) and of high‐toxic substances such as polybrominated dioxins (PBrDD's), dibenzofurans (PBrDF's) by the combustion.

In order to determine a possible source of the non‐manufactured compound OCS, we conducted several model experiments in a combustion chamber at various temperatures from 400 °C to 800 °C. The thermolysis of chlorinated solvents like chloroform or of chlorinated aromatice like pentachlorobenzene produced—among other chlorinated substances—OCS as one of the major products.

Analogous combustion experiments with polyester plastics containing decabromodiphenylether as flame retardant and antimony trioxide as Synergist led to PBrDD's and PBrDF's. Here antimony trioxide seems to play an important role because in absence of this oxide, PBrDD's and PBrDF's were not found in our experimental conditions.     

超大跨度渡槽脉动风频率特性分析

贵州龙场渡槽是我国目前最大的拱跨渡槽,其脉动风频率特性分析对设计工作具有极其重要的指导作用。计算了龙场渡槽在有水、无水工况下的前20阶自振频率,分析了相应的振型;采用极值Ⅰ型概率分布函数,计算得到龙场渡槽所在地的50年一遇最大设计风速为17.6m/s;针对1986～2010年间的3次强风风速和50年一遇最大设计风速,计算了龙场渡槽所在地典型高程处的脉动风功率谱密度。研究表明:在同一高度,随着年平均最大风速的增加,功率谱密度最大值逐渐增大,其对应的频率也在增大;对于同一风速,随着高度的增加,功率谱密度的最大值逐渐增大,其对应的频率也在增大。通过比较龙场渡槽自振频率与脉动风功率谱密度显著值所对应的频率,认为龙场渡槽在上述风速下不会发生共振现象。     

基于GA-ELM浆体管道输送临界流速预测模型研究

针对浆体管道输送临界流速预测难度大、精确度低等技术难题,提出了基于极限学习机(ELM)的临界流速预测模型,用训练集对模型进行训练,以验证集预测值的均方误差作为适应度函数,利用遗传算法(GA)对ELM模型参数进行优化,应用优化得到的ELM模型对预测集进行预测。以某矿山为例,模型参数优化结果如下:隐含层节点数L为400,输入权值ai、偏置向量bi最优组合下预测结果适应度为0.0201。采用优化的ELM模型对预测集进行预测,预测结果的最大相对误差x=3.96%,平均相对误差y=1.58%,对比BP神经网络(x=12.95%)和SVM模型(x=3.19%),表明ELM模型更加精确、高效。     

水平弯管内硫沉积数值模拟研究

元素硫在集输管道中沉积会引起堵塞和腐蚀问题,而弯管是集输管道中较易出现硫沉积的部位之一。为此,采用数值模拟的方法研究水平弯管内的硫沉积问题,首先利用雷诺应力模型对流场进行模拟,其次采用Lagrange颗粒轨道模型对硫颗粒进行模拟追踪,研究不同因素对硫颗粒在弯管中沉积率的影响。结果表明:弯管内壁会出现负压区和低速区,气流速度和弯曲比会对流场产生影响;硫颗粒在弯管中的沉积率随流速、粒径和弯曲比的增大而增大;硫颗粒沉积是重力和离心力共同作用的结果,其中离心力是导致弯管中沉积率增大的重要原因。