常温下IC反应器启动过程中的颗粒污泥性能研究

在常温下用自配葡萄糖废水启动IC反应器,研究了厌氧颗粒污泥的形成过程和特性。IC反应器进水浓度为3 000 mg COD/L,水温为14.5～26℃,25 d内形成了颗粒污泥。结果表明,随着运行时间和容积负荷的增加,颗粒污泥粒径逐渐增大。反应器启动完成后,反应器中2 mm的颗粒污泥增加到6.6%,0.3 mm的颗粒从57.7%减少到39.4%;VSS浓度从24.7 g/L上升到48.2 g/L;VSS/SS从34.4%增加到72.8%。颗粒污泥的沉降速度与颗粒粒径成正比,0.3～3 mm的颗粒污泥的沉降速度介于34.05～109.75 m/h之间,具有良好的沉降性能。初始接种污泥几乎没有产甲烷活性,与第30 d的初期颗粒污泥相比,成熟的颗粒污泥的产甲烷活性提高了46.7%。     

水力旋流器速度场的PDPA测试研究

应用相位多普勒粒子分析仪(PDPA)对液液水力旋流器模型的内部流场进行了测试,分析了旋流器内部速度场的特点。通过进口流量的变化,测试了该模型的不同截面上的速度场分布情况。测试结果表明:随着流量的增大,旋流器轴截面上的速度都增大,旋流变大,有利于连续相和分散相的分离;旋流器中连续相和分散相速度分布趋势相同,但在管芯处,两者速度滑移明显。     

Organochlorines, brominated flame retardants and mercury levels in six seabird species from the Gulf of St. Lawrence (Canada): Relationships with feeding ecology, migration and molt

Concentrations of organochlorines (OCs), brominated flame retardants (BFRs) and mercury (Hg) were measured in eggs of six seabird species breeding in the Gulf of St. Lawrence, Canada. Stable nitrogen (δ¹⁵N) and carbon (δ¹³C) isotopes were used as ecological tracers to measure trophic level and connectivity with benthos, respectively. Concentrations, patterns as well as ecological tracers varied significantly between species. The sum of polychlorinated biphenyls (ΣPCBs) was the most important group measured in all seabird species based on concentration followed generally by the sum of chlorinated pesticides (ΣCPs), the sum of brominated flame retardants (ΣBFRs) and finally total Hg (THg). ΣPCBs, ΣCPs and ΣBFRs increased with trophic level, whereas THg did not. Only ΣBFRs increased with a higher connectivity with the benthos. Seabird species resident to the Great Lakes-St. Lawrence ecosystem showed higher Hg and BFR levels than migratory species. Molt patterns were used to explain variations of contaminant levels.     

Biomagnetic monitoring of industry-derived particulate pollution

Clear association exists between ambient PM₁₀ concentrations and adverse health outcomes. However, determination of the strength of associations between exposure and illness is limited by low spatial-resolution of particulate concentration measurements. Conventional fixed monitoring stations provide high temporal-resolution data, but cannot capture fine-scale spatial variations. Here we examine the utility of biomagnetic monitoring for spatial mapping of PM₁₀ concentrations around a major industrial site. We combine leaf magnetic measurements with co-located PM₁₀ measurements to achieve inter-calibration. Comparison of the leaf-calculated and measured PM₁₀ concentrations with PM₁₀ predictions from a widely-used atmospheric dispersion model indicates that modelling of stack emissions alone substantially under-predicts ambient PM₁₀ concentrations in parts of the study area. Some of this discrepancy might be attributable to fugitive emissions from the industrial site. The composition of the magnetic particulates from vehicle and industry-derived sources differ, indicating the potential of magnetic techniques for source attribution.     

侧开缝对竖通道内旋转热流场影响的实验研究

为了掌握竖通道两侧开缝对于通道内热流场的影响,在一32cm(长)×32cm(宽)×200cm(高)的竖通道内进行了旋转热流场实验研究,对比了在不同热源条件下,竖通道侧开缝宽度为3.0cm和3.5cm时,侧开缝底部5cm高区域被遮挡前后通道内热流场的变化。实验结果表明,与遮挡前相比,遮挡通道侧开缝底部对火焰燃烧和热流场的运动状态都会产生影响。遮挡通道侧开缝底部区域,会在一定程度上限制外界冷空气进入通道内,从而减弱通道内的火焰旋转程度,致使燃料燃尽的耗时更长,平均火焰高度降低,其影响程度随着燃料池增大而减弱;遮挡侧开缝底部区域后,造成通道内下部区域中心轴线处的温度降低,最大影响区域在50cm高度附近,而在150cm高度以上基本没有影响;平均火焰高度与燃料池直径之比的无量纲量H/Φ与Peclet数之间的比例系数近似为1.732,并且是否遮挡侧开缝底部区域对于两者之间比例关系的影响不大。     

分散填料曝气塔多相流态分析与传氧性能表征

针对分散填料曝气塔中多相流的流态与传氧过程,实验了布气方式以及海绵和陶粒2种填料对于体系的气含率εg、流态以及气-液传质性能的影响。在表观气速U范围(0.01～0.18 m/s)内观察到81孔布气板(Φ1 mm)体系出现3个明显相区,孔数过少(25孔),或者孔间距较小(225孔)均没有明显过渡区,在湍流区(U>0.118 m/s)3种布气板的气含率没有明显差别。海绵填料体积分数εs<25%时体系的气含率没有明显变化,35%时气含率下降且过渡区提前出现。在非均相区,海绵填料明显提高了体系的传质系数KLa。陶粒填料降低了气含率,固含率对εg的影响差别不明显,同时降低了多相流体系的KLa,且随着固含率的增加KLa降低。对比多种操作条件,单位体积空气传氧能力KLa/εg无明显差别,但在81孔布气板的过渡区KLa/εg出现一个明显的极小区间,说明过渡区传氧效率较低。在特定的实验操作条件下,KLa/εg较为稳定,这为深入理解两种气泡群体的共存体系在传氧性能方面各自的权重,提供了重要的量化参考。     

2,5,6,9,10-Pentabromocyclododecanols (PBCDOHs): a new class of HBCD transformation products

Pentabromocyclododecanols (PBCDOHs) are potential environmental transformation products of hexabromocyclododecanes (HBCDs). They are also potential stage one metabolites of biological HBCD transformations. Herein, we present analytical evidence that PBCDOHs are also constituents of technical HBCDs and flame-proofed polystyrenes (FP-PSs). PBCDOHs are possibly formed during the synthesis of technical HBCD, presumably during the bromination of cyclododecatrienes in aqueous isobutanol together with isobutoxypentabromocyclododecanes (iBPBCDs), which have been identified in these materials recently. Of the 64 stereoisomers possible, eight pairs of enantiomers, named α-, β-, γ-, δ-, ε-, ζ-, η-, and θ-PBCDOHs were separated with a combination of normal-, reversed- and chiral-phase LC. Crystal structure analysis revealed the stereochemistry of the α-PBCDOH pair of enantiomers, which was assigned to (1S,2S,5R,6S,9S,10R)-2,5,6,9,10-pentabromocyclododecanol and its enantiomer. Mass spectrometric data are in accordance with the expected isotope patterns. On a C₁₈-RP-column, the polar PBCDOHs eluted before the HBCD and iBPBCD classes of compounds. PBCDOHs were also found in FP-PS materials. The stereoisomer patterns varied considerably in these materials like those of HBCDs and iBPBCDs. Expanded polystyrenes were rich in late-eluting stereoisomers, similar to technical HBCD mixtures. Extruded polystyrenes contained more of the polar, faster-eluting isomers. The presented chromatographic and analytical methods allow a stereoisomer-specific search for PBCDOHs in biota samples, which might have experienced metabolic HBCD transformation reactions. Besides this potential source, it has to be recognized that PBCDOHs are by-products in technical HBCDs and in flame-proofed polystyrenes. Therefore, it is likely that PBCDOHs and iBPBCDs are released to the environment together with HBCD-containing plastic materials.     

Contamination and potential sources of polybrominated diphenyl ethers (PBDEs) in water and sediment from the artificial Lake Shihwa, Korea

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in water and sediment collected from the artificial Lake Shihwa and surrounding creeks. Total concentrations of 23 PBDE congeners in water and sediment ranged from 0.16 to 11.0 ng L⁻¹ and from 1.3 to 18 700 ng g⁻¹ dry weight, respectively. The concentrations of BDE 209 in water and sediment were 1-2 orders of magnitude higher than the total concentrations of other PBDE congeners. The concentrations of total PBDEs and BDE 209 in sediments were the highest compared to previously reported worldwide levels. The highest concentrations of PBDEs in water and sediments were found in creeks near industrial complexes. The PBDE concentrations gradually decreased with increasing distance from the creeks to the inshore and then offshore regions of the lake. BDE 209 was a major congener, accounting for 80% of the total PBDEs in water and sediment, consistent with a high consumption of deca-BDE for the brominated flame retardant market in Korea. Non-parametric multidimensional scaling ordination showed that surrounding creeks are major pathways of PBDE contamination associated with deca-BDE technical mixtures used in industrial complexes around Lake Shihwa. A significant correlation between total organic carbon and total PBDE concentration was found in sediments, and the correlation coefficients for individual PBDE congeners relatively increased from lower to higher brominated congeners.     

纳滤膜在垃圾渗滤液深度处理中应用

利用纳滤膜技术处理MBR二级处理后出水,研究纳滤膜在垃圾渗滤液应用中回收率及进出水COD变化情况。工程试验结果表明:当MBR出水COD小于800 mg/L～900 mg/L,纳滤膜出水COD小于100 mg/L;纳滤系统直通式运行回收率40%～50%;内循环式运行回收率75%～80%,浓缩段回收率9.3%～11.8%,总回收率80.4%～82.0%;根据膜面运行流速要求,进膜的流量需大于8 m3/h;进膜压力、进水流量和循环流量是影响膜通量大小的关键因素。     

W火焰炉低氮燃烧改造可行性研究

对黔北电厂1～4号W火焰锅炉实际运行状态进行分析,得出NO。排放浓度偏高的主要原因,并提出1—4号机组W火焰炉低氮改造的方案,即在拱下燃烧室内组织大回流长火焰燃烧方式,并通过SOFA风形成炉内深度空气分级低氮燃烧。同时针对1、2号炉和3、4号炉各自特性提出具体的改造方案,保证在锅炉效率不降低的条件下,1～4号W火焰锅炉的NOx排放浓度不高于850mg／m3,从而为W火焰锅炉低氮燃烧改造提供可行性方案,保证W火焰锅炉下一步烟气脱硝的顺利进行。