通风速率及源项特性对室内甲醛扩散规律的影响

采用Airpak软件模拟研究在通风速率、源项强度和源项面积多因素作用下的室内甲醛扩散规律。结果表明,在室内甲醛初始为零时,源项散发甲醛后,在2000 s内室内甲醛浓度升高较快,之后处于平衡状态。在通风速率加倍时甲醛最高浓度降低56%,源项强度减半时甲醛最高浓度降低16%,源项散发面积减少37%时甲醛最高浓度降低24%。说明通风速率对室内甲醛浓度的影响最大,其次依次为源项散发面积和源项强度。     

Effects of moisture and particle size distribution on flame propagation of L-lysine sulfate powder

Lysine is an essential amino acid for human body, and lysine sulfates are at risk of fire and explosion during the production and processing. However, there is no public report on the lysine sulfate powder explosion hazard research. In this paper, the effects of moisture, mass concentration and particle size on the flame propagation behaviors of L-lysine sulfate powder were studied in a vertical pipe. The results showed that the flame propagation could be divided into 3 stages: free propagation, acceleration and attenuation, in which the acceleration was owed to the positive feedback of combustion reaction, gas expansion and turbulence. Moisture content could promote the flame propagation of L-lysine sulfate powder to a certain extent, but it had a strong inhibitory effect on the explosion when the moisture content was too large. The flame propagation velocity increased with the decrease of the average particle size of powder,.With the increase of the particle concentration, the flame propagation velocity of powder explosion increased first and then decreased, that was, there was an optimal concentration of powder explosion, and the powder was more sensitive to the change of concentration in the range of low concentration.     

硅油改性尿素基膨胀型阻燃剂的制备与表征

为提高膨胀型阻燃剂的阻燃性能与耐久性能,在水性聚氨酯树脂、聚磷酸铵、聚丙烯酰胺和磷酸铝的基础配方上,通过加入不同掺量的尿素以及不同掺量的硅油,对此阻燃体系配方进行耐久性优化设计,制备出尿素-硅油改性且具有一定耐水性的膨胀型阻燃涂层。通过锥形量热仪测试分析表征其阻燃性能来确定尿素-硅油的最佳掺量;并测量阻燃涂层的水接触角。结果表明:当掺加2 wt%的尿素时样品的阻燃效果最佳,掺量过多时会降低水接触角,影响样品耐水性;当掺加0.5 wt%的硅油时,样品的阻燃效果最佳,且随着掺量增多水接触角逐渐增大。     

Sorption of aromatic organophosphate flame retardants on thermally and hydrothermally produced biochars

• TPhP showed faster and higher sorption on biochars than TPPO. • Pyrochars had higher sorption capacity for TPPO than hydrochar. • Hydrophobic interactions dominated TPhP sorption by biochars. • The π-π EDA and electrostatic interactions are involved in sorption. Aromatic organophosphate flame retardant (OPFR) pollutants and biochars are commonly present and continually released into soils due to their increasingly wide applications. In this study, for the first time, the sorption of OPFRs on biochars was investigated. Although triphenyl phosphate (TPhP) and triphenylphosphine oxide (TPPO) have similar molecular structures and sizes, TPhP exhibited much faster and higher sorption than TPPO due to its stronger hydrophobicity, suggesting the dominant role of hydrophobic interactions in TPhP sorption. The π-π electron donor–acceptor (EDA) interactions also contributed to the sorption process, as suggested by the negative correlation between the sorption capacity of the aromatic OPFRs and the aromatic index (H/C atomic ratios) of biochar. Density functional theory calculations further showed that one benzene ring of aromatic OPFRs has no electrons, which may interact with biochar via π-π EDA interactions. The electrostatic attraction between the protonated P = O in OPFRs and the negatively charged biochar was found to occur at pH below 7. This work provides insights into the sorption behaviors and mechanisms of aromatic OPFRs by biochars.     

基于COMSOL软件下办公建筑室内通风分析

自然通风不需动力设备,不消耗动力,是一种经济节能的通风方式。建筑通风应优先利用自然通风。窗户尺寸、开窗面积比例,窗户高度都是自然通风的影响因素。本研究利用COMSOL Multiphysics的CFD模块,以数值模拟的方式对不同窗户尺寸、开窗面积比例、窗户高度的办公建筑进行室内自然通风模拟,分析自然通风对这些办公建筑内的气流和温度的影响,得出窗户尺寸为900 mm×1500 mm,窗台高1100 mm,满窗通风的方案最符合办公室自然通风要求,该分析结果可为建筑设计提供参考依据。     

鱼类样品中有机磷阻燃剂分析方法的优化研究

建立了鱼类组织样品中有机磷阻燃剂（OPFRs）的分析方法,优化了萃取条件、净化条件、液相色谱条件和质谱检测参数。确定了生物样品经冷冻干燥后,以1∶1（V/V）的正己烷/二氯甲烷混合溶液进行加速溶剂萃取,利用氨基固相萃取柱进行净化,以1∶1（V/V）的正己烷/二氯甲烷、二氯甲烷和9∶1（V/V）的二氯甲烷/甲醇为洗脱液,最后用超高效液相色谱-串联质谱同时对9种OPFRs进行定性定量检测。结果表明,各物质的基质加标回收率均为56.5%~108%,方法的测定下限为0.016~0.104 ng/g （以脂重计）,满足了生物样品中OPFRs的分析检测要求。利用该方法测定了北京和广州市养殖和野生鲫鱼肌肉组织样品,主要的OPFRs同族体为磷酸三正丁酯（TNBP）、磷酸三乙基己基酯（TEHP）、磷酸三（1-氯-2-丙基）酯（TCIPP）和磷酸三氯乙基酯（TCEP）,质量比为5.94~33.7 ng/g（以脂重计）,显示出良好的适用性。     

油污土壤中柴油去除的影响因素

以柴油为污染物,通过一维砂柱实验模拟油污土壤中柴油去除过程,从油水界面张力(IFT)角度分析溶液pH、淋滤速度和表面活性物质对除油效果的影响。结果表明,延长油水接触时间、升高或降低蒸馏水pH值均使油水界面张力下降,低淋滤速度下单位孔隙体积水中石油浓度较大,而水溶液pH的变化对除油效果影响不明显。十二烷基硫酸钠(SDS)和乙醇使油水界面张力显著下降,因此表面活性物质的除油效率明显高于蒸馏水,乙醇溶液的除油效率随着体积浓度的增加而升高。从石油释放动力学方程计算的柴油累积释放量看,50%乙醇除油效率最高,8 mmol/L SDS溶液次之,在淋洗初期柴油去除效果最为明显,而在中期和后期除油率增加幅度逐渐减小。     

送风速度对置换通风热力分层影响的研究

用热力分层理论及CFD数值模拟两种方法,来研究送风速度对置换通风热力分层的影响,并将所得结果与模拟结果进行了对比分析。结果表明,随着送风速度的增大,热力分层高度增加;由于热力分层处存在一个极不稳定的过渡层,所以两种方法得到的热力分层高度存在相对误差,同时提出人处于坐姿时热力分层高度的最低值,建议取热力分层高度Z≥1.35 m。     

不同实验标准对几种常见阻燃剂粉尘可爆性影响研究

为研究阻燃剂粉尘可爆性,依据不同实验标准所采用的哈特曼管和20 L球爆炸实验系统,对几种常见阻燃剂粉尘可爆性进行了初步研究。结果表明:按不同标准实验,四溴双酚A、三聚氰胺、二乙基次膦酸铝、赤磷和对二丁基氧化锡均为可爆性粉尘;三氧化二锑、钛白粉、碳酸钙、氢氧化铝和二氧化硅均为不可爆性粉尘;氰尿酸三聚氰胺、球形硅树脂粉以及膨胀石墨的粉尘可爆性结果不一致。对于某些阻燃剂,点火源的起始能量对粉尘可爆性结果有较大影响;某些阻燃剂对爆炸具有抑制效应,抑制程度同物质本身的性质和浓度有关系。     

GP/APP膨胀阻燃体系对硅橡胶复合材料阻燃及抑烟性能的影响

为了探究石墨粉 (GP) 与聚磷酸铵 (APP) 膨胀阻燃体系对硅橡胶复合材料的阻燃及抑烟特性的影响,采用锥形量热仪 (CCT)、热重分析仪 (TG) 及极限氧指数测试仪 (LOI) 对阻燃硅橡胶复合材料进行表征。研究结果表明:与单独添加膨胀阻燃剂APP的阻燃硅橡胶相比,添加GP/APP膨胀阻燃体系可有效提升燃烧过程中形成的膨胀碳层的致密度,降低阻燃硅橡胶复合材料的热释放速率及总烟释放量,提高阻燃硅橡胶复合材料高温阶段的热稳定性,提升阻燃硅橡胶复合材料的燃烧成炭率和质量保持率; 使阻燃硅橡胶复合材料的氧指数值增大。