倾斜工作面底板破坏深度计算方法研究

煤层倾角是影响底板破坏带深度的一个重要因素,为深入研究煤层倾角对底板破坏带深度的影响,采用断裂力学理论建立了煤层倾角对底板破坏带深度影响的计算模型,得出由于煤层倾角的存在,倾斜工作面上部破坏带深度小于下部破坏带深度。收集我国大量的突水案例与煤层倾角统计数据,以及破坏带深度与煤层倾角统计数据,从突水案例数据可以看出倾斜工作面下部由于底板破坏造成的突水次数明显多于上部,从破坏带深度与煤层倾角变化趋势可以看出随着倾角增大破坏带深度也在增大。统计得到数据的结论与应用断裂力学模型分析得到的结论一致。最后对建立的破坏带深度计算模型井下质量检验,检验结果显示该计算模型的精度较高,符合现场应用的要求。     

Cap-and-trade properties under different hybrid scheme designs

This paper examines the key design mechanisms of existing and proposed cap-and-trade markets. First, it is shown that the hybrid systems under investigation (price floor using a minimum price guarantee, price collar, allowance reserve, options offered by the regulator, and offset relaxation) can be decomposed into a combination of an ordinary cap-and-trade scheme with European- or American-style call and put options. Then, we quantify and discuss the advantages and disadvantages of the proposed hybrid schemes by investigating whether pre-set objectives (enforcement of permit price bounds and reduction of the compliance costs for relevant companies) can be accomplished while maintaining the original environmental targets. Plain vanilla options are proposed as an alternative that reconciles the otherwise conflicting policy objectives.     

A novel radiant floor system: Detailed characterization and comparison with traditional radiant systems

ABSTRACT

Radiant floor systems have the potential to reduce energy consumption and the carbon footprint of buildings. This study analyzed a novel radiant panel configuration comprising a metal plate with small spikes that can be pressed into cement board or wood. The behavior of this configuration was simulated for different materials for the metal plate, spike dimensions, and varying spacing between spikes. An annual energy simulation model compared the radiant panel configuration with the traditional concrete-based system. Simulations were run under heating dominant, cooling dominant, and neutral conditions; significant cost savings and greenhouse gas emission reduction were seen across all scenarios.     

Mercury distribution around the Spolana chlor-alkali plant (central Bohemia, Czech Republic) after a catastrophic flood, as revealed by bioindicators

The current mercury concentrations in moss Hypnum cupressiforme, in forest floor humus and in oak and pine bark were determined in a 10-km radius around a chlor-alkali plant affected by a flood in 2002. Similar distribution patterns of Hg had accumulated in four bio-indicators, irrespective of different Hg concentrations in the analysed biological matrices. No accumulation of extremely Hg-contaminated materials was found in the flooded parts. The bio-indicators, used alone or in combination, can be recommended for effective and reliable determination of Hg contamination levels around Hg sources.     

JM隔振垫块的研发及工程应用

JM系列隔振垫块是我国20世纪90年代初研制的用于"浮筑楼板"技术的新型隔振产品,首先用于广播电台和电视台的浮筑套房。目前已广泛应用于建筑、机械、交通等多个领域,是隔绝振动与固体声的理想产品。本文从产品的研究开发到工程实践进行了较为详尽的描述。     

考虑人体舒适度的大型火车站房楼盖振动控制研究

近年来,各地纷纷兴建大型火车站房,这类建筑中的楼盖大多为大跨、轻质和低阻尼结构,本文基于人体舒适度考虑,对这些大跨楼盖进行振动舒适度的分析.首先,建立某大型火车站房的整体有限元模型,研究这类建筑中大跨楼盖的振动特性;随后,对楼盖在各种不利工况人群荷载作用下的振动舒适度进行分析;最后,在已有研究的基础上,提出了大跨楼盖多...     

Subjective assessments of floor slipperiness before and after walk under two lighting conditions

A gait experiment was performed. The participants were tested under shoes, floors, surface and lighting conditions. They gave floor slipperiness ratings before and after a gait trial. The perceived sense of slip (PSOS) was collected. It was found that the perceived floor slipperiness (PFS) before walking was affected significantly by the lighting, floor and surface conditions. Relative low PFS values were recorded under wet and detergent-contaminated conditions in the normal daylight condition as compared with those in the dimmed condition. The PFS after the gait was significantly affected by the floor and surface conditions. The PSOS was highly correlated with the PFS after trial. The regression analyses results indicated that both the coefficient of friction (COF) of the floor and lighting were primary predictors of the PFS before a gait. The COF and walking speed were the primary predictors of the PFS after a gait.     

基于Winkler模型的沿空留巷底板变形力学分析

沿空留巷顶板岩层垮落到底板时,会影响底板的受力和变形,进而导致底臌,底臌的产生将直接影响采煤工作开展。为了对巷道底板的变形机理进行研究,根据空留巷底板受力特点,将巷道底板视为弹性地基梁,建立顶板岩层垮落在巷道底板上的不均匀荷载作用下的Winkler弹性地基梁力学模型,通过对高阶微分方程求解,分析巷道底板任一处的挠度、转角、弯矩及剪力的分布规律,并结合内力分布规律对底板破坏机理进行分析。结合工程实践,提出了防止底板变形的措施,为类似工程的设计及施工提供参考。     

Slipping on pedestrian surfaces: methods for measuring and evaluating the slip resistance

Tripping, slipping and falling accidents are among the types of accident with a high incidence. This article describes the requirements concerning slip resistance, as well as the state of the art of slip resistance measurement standards in the European Community and the USA. The article also describes how risk assessment can be performed in the field.     

Recycling of Malaysia’s electric arc furnace (EAF) slag waste into heavy-duty green ceramic tile

Recently, various solid wastes from industry such as glass waste, fly ash, sewage sludge and slag have been recycled into various value-added products such as ceramic tile. The conventional solutions of dumping the wastes in landfills or incineration, including in Malaysia are getting obsolete as the annual huge amount of the solid wastes would boost-up disposal cost and may cause permanent damage to the flora and fauna. This recent waste recycling approach is much better and greener as it can resolve problems associated with over-limit storage of industrial wastes and reduce exploration of natural resources for ceramic tile to continuously sustain the nature. Therefore, in this project, an attempt was made to recycle electric arc furnace (EAF) slag waste, obtained from Malaysia’s steel making industry, into ceramic tile via conventional powder compaction method. The research work was divided into two stages. The first stage was to evaluate the suitability of EAF slag in ceramic tile by varying weight percentage of EAF slag (40 wt.%, 50 wt.% and 60 wt.%) and ball clay (40 wt.%, 50 wt.% and 60 wt.%), with no addition of silica and potash feldspar. In the second stage, the weight percentage of EAF slag was fixed at 40 wt.% and the percentage of ball clay (30 wt.% and 40 wt.%), feldspar (10 wt.% and 20 wt.%) and silica (10 wt.% and 20 wt.%) added was varied accordingly. Results obtained show that as weight percentage of EAF slag increased up to 60 wt.%, the percentage of apparent porosity and water absorption also rose, with a reduction in tile flexural strength and increased porosity. On the other hand, limiting the weight percentage of EAF slag to 40 wt.% while increasing the weight percentage of ball clay led to a higher total percentage of anorthite and wollastonite minerals, resulting in higher flexural strength. It was found that introduction of silica and feldspar further improved the flexural strength due to optimization of densification process. The highest flexural strength, lowest apparent porosity and water absorption of EAF slag based tile was attained at the composition of 40 wt.% EAF slag – 30 wt.% ball clay – 10 wt.% feldspar – 20 wt.% silica. The properties of ceramic tile made with EAF slag waste (up to 40 wt.%), especially flexural strength are comparable to those of commercial ceramic tile and are, therefore, suitable as high flexural strength and heavy-duty green ceramic floor tile. Continuous development is currently underway to improve the properties of tile so that this recycling approach could be one of the potential effective, efficient and sustainable solutions in sustaining our nature.