ASSESSMENT OF ANTHROPOGENIC LOADS ON LANDSCAPES AS A TOOL TO DETERMINE THE POTENTIAL FOR SUSTAINABLE REGIONAL DEVELOPMENT: CASE STUDY FROM AZERBAIJAN

In order to determine the potential for sustainable regional development of the Caspian coastal zone, a study was made for the Khachmaz–Absheron zone of Azerbaijan. An evaluation was performed to assess the anthropogenic load on landscapes. Using the 8-point scale offered by Isachenko [2001, Ecological Geography of Russia, Saint Petersburg University Press, Saint Petersburg] for the indicators of agricultural, industrial, urban and integral anthropogenic loads, we did a preliminary ranking of the provinces in the Khachmaz–Absheron zone of Azerbaijan for the each indicator taken separately. Vital statistics were used as a supplementary indicator of environmental conditions in the region. By comparing the data for provinces with each other and the data on Azerbaijan average, we have classified the provinces into 4 groups according to specific combinations of the indicators. Each group of provinces has distinctive environmental conditions and features for sustainable development. The classification makes it possible to develop certain recommendations for the regional sustainable development. Measures to be implemented within the Azerbaijan State Program on Social and Economic Development of Regions are also discussed. In the Khachmaz province, production of ecologically pure products is highly recommended. Special attention should be given to the development of tourism and recreational institutions in the Khachmaz, Khizi and Devechi provinces. Recommendations for these provinces include further development of industry on the basis of modern safe technologies. The irrigation and drainage networks should be reconstructed. The reconstruction will make it possible to reduce water loss and to increase the productivity of agriculture. In the Absheron province, Baku and Sumgait cities environmental systems are overloaded, and so the works at highly polluting enterprises must be stopped, the enterprises have to be re-equipped (old filters must be changed first of all) or relocated from the area (a decrease of environmental risk should be in the focus of attention). For improving of air quality, green areas should increase. There is a need to reduce urban traffic density and to reconstruct highways. Use of old vehicles must be forbidden or restricted, and transition to environmentally friendly fuel should be supported in every way possible. It is necessary to bring the waste management system and sanitary landfills up to international standards, and to improve the water supply and sewerage systems.     

ATIS环境下驾驶员认知负荷研究进展

为构建更加符合驾驶员认知特性的出行信息环境,提高驾驶员出行信息服务水平,对ATIS环境下驾驶员认知负荷研究进展进行系统分析与评述.首先阐述了认知负荷的理论基础,随后分析了ATIS环境下驾驶员认知负荷的影响因素,同时分类解析了驾驶员内在认知负荷、外在认知负荷与相关认知负荷的产生根源,并对认知负荷的形成机理进行了分析;系统评述了驾驶员认知负荷的测量方法,最后基于驾驶员信息认知负荷提出了ATIS优化对策.结果表明:年龄、性别、受教育程度、月收入、出行经验是影响驾驶员认知负荷的主要因素;道路交通标志的版面设计与驾驶员的标志视认时间关联密切;驾驶过程中拨打手机及使用车载终端均会分散驾驶员注意力,增加驾驶员的信息认知负荷;较高的车速与音频播放等环境会对驾驶员的信息认知能力提出更高要求.     

Lower Leg Injury Reference Values and Risk Curves from Survival Analysis for Male and Female Dummies: Meta-analysis of Postmortem Human Subject Tests

Objective: Derive lower leg injury risk functions using survival analysis and determine injury reference values (IRV) applicable to human mid-size male and small-size female anthropometries by conducting a meta-analysis of experimental data from different studies under axial impact loading to the foot–ankle–leg complex.

Methods: Specimen-specific dynamic peak force, age, total body mass, and injury data were obtained from tests conducted by applying the external load to the dorsal surface of the foot of postmortem human subject (PMHS) foot–ankle–leg preparations. Calcaneus and/or tibia injuries, alone or in combination and with/without involvement of adjacent articular complexes, were included in the injury group. Injury and noninjury tests were included. Maximum axial loads recorded by a load cell attached to the proximal end of the preparation were used. Data were analyzed by treating force as the primary variable. Age was considered as the covariate. Data were censored based on the number of tests conducted on each specimen and whether it remained intact or sustained injury; that is, right, left, and interval censoring. The best fits from different distributions were based on the Akaike information criterion; mean and plus and minus 95% confidence intervals were obtained; and normalized confidence interval sizes (quality indices) were determined at 5, 10, 25, and 50% risk levels. The normalization was based on the mean curve. Using human-equivalent age as 45 years, data were normalized and risk curves were developed for the 50th and 5th percentile human size of the dummies.

Results: Out of the available 114 tests (76 fracture and 38 no injury) from 5 groups of experiments, survival analysis was carried out using 3 groups consisting of 62 tests (35 fracture and 27 no injury). Peak forces associated with 4 specific risk levels at 25, 45, and 65 years of age are given along with probability curves (mean and plus and minus 95% confidence intervals) for PMHS and normalized data applicable to male and female dummies. Quality indices increased (less tightness-of-fit) with decreasing age and risk level for all age groups and these data are given for all chosen risk levels.

Conclusions: These PMHS-based probability distributions at different ages using information from different groups of researchers constituting the largest body of data can be used as human tolerances to lower leg injury from axial loading. Decreasing quality indices (increasing index value) at lower probabilities suggest the need for additional tests. The anthropometry-specific mid-size male and small-size female mean human risk curves along with plus and minus 95% confidence intervals from survival analysis and associated IRV data can be used as a first step in studies aimed at advancing occupant safety in automotive and other environments.     

Injuries in Full-Scale Vehicle Side Impact Moving Deformable Barrier and Pole Tests Using Postmortem Human Subjects

Objective: To conduct near-side moving deformable barrier (MDB) and pole tests with postmortem human subjects (PMHS) in full-scale modern vehicles, document and score injuries, and examine the potential for angled chest loading in these tests to serve as a data set for dummy biofidelity evaluations and computational modeling.

Methods: Two PMHS (outboard left front and rear seat occupants) for MDB and one PMHS (outboard left front seat occupant) for pole tests were used. Both tests used sedan-type vehicles from same manufacturer with side airbags. Pretest x-ray and computed tomography (CT) images were obtained. Three-point belt-restrained surrogates were positioned in respective outboard seats. Accelerometers were secured to T1, T6, and T12 spines; sternum and pelvis; seat tracks; floor; center of gravity; and MDB. Load cells were used on the pole. Biomechanical data were gathered at 20 kHz. Outboard and inboard high-speed cameras were used for kinematics. X-rays and CT images were taken and autopsy was done following the test. The Abbreviated Injury Scale (AIS) 2005 scoring scheme was used to score injuries.

Results: MDB test: male (front seat) and female (rear seat) PMHS occupant demographics: 52 and 57 years, 177 and 166 cm stature, 78 and 65 kg total body mass. Demographics of the PMHS occupant in the pole test: male, 26 years, 179 cm stature, and 84 kg total body mass. Front seat PMHS in MDB test: 6 near-side rib fractures (AIS = 3): 160–265 mm vertically from suprasternal notch and 40–80 mm circumferentially from center of sternum. Left rear seat PMHS responded with multiple bilateral rib fractures: 9 on the near side and 5 on the contralateral side (AIS = 3). One rib fractured twice. On the near and contralateral sides, fractures were 30–210 and 20–105 mm vertically from the suprasternal notch and 90–200 and 55–135 mm circumferentially from the center of sternum. A fracture of the left intertrochanteric crest occurred (AIS = 3). Pole test PMHS had one near-side third rib fracture. Thoracic accelerations of the 2 occupants were different in the MDB test. Though both occupants sustained positive and negative x-accelerations to the sternum, peak magnitudes and relative changes were greater for the rear than the front seat occupant. Magnitudes of the thoracic and sternum accelerations were lower in the pole test.

Conclusions: This is the first study to use PMHS occupants in MDB and pole tests in the same recent model year vehicles with side airbag and head curtain restraints. Injuries to the unilateral thorax for the front seat PMHS in contrast to the bilateral thorax and hip for the rear seat occupant in the MDB test indicate the effects of impact on the seating location and restraint system. Posterolateral locations of fractures to the front seat PMHS are attributed to constrained kinematics of occupant interaction with torso side airbag restraint system. Angled loading to the rear seat occupant from coupled sagittal and coronal accelerations of the sternum representing anterior thorax loading contributed to bilateral fractures. Inward bending initiated by the distal femur complex resulting in adduction of ipsilateral lower extremity resulted in intertrochanteric fracture to the rear seat occupant. These results serve as a data set for evaluating the biofidelity of the WorldSID and federalized side impact dummies and assist in validating human body computational models, which are increasingly used in crashworthiness studies.     

高温职业危害风险分级与分级管理研究

为进一步研究高温作业职业危害风险强度,探讨高温作业环境条件下环境温度与劳动强度对劳动者健康的影响及其联合作用。采用高温环境模拟仓实验与建筑行业露天高温作业现场调研和测试相结合的方法,以高温环境和心血管体能负荷值(%CVL)作为高温作业危害风险分级的主要参照指标。提出了高温作业职业危害风险分级的技术方法和针对不同程度高温职业危害风险管理措施的具体建议,为保护高温作业劳动者安全与健康提供科学依据。     

地表载荷对硬岩区埋地管道应力应变影响分析

为研究地表载荷对硬岩区埋地管道力学性能的影响,建立了管-土耦合三维数值模型,分析了地表载荷大小、作用面积、管道压力、管道径厚比及回填土弹性模量对管道应力分布、塑性应变、椭圆度的影响。结果表明:地表压载作用下,高应力区首先出现在管道顶部且呈椭圆形;随着地表载荷及其作用面积的增大,管道高应力区逐渐扩大,管道截面左右两侧也出现应力集中;随着回填土弹性模量、管道壁厚及内压的增加,管道顶部高应力区及最大等效应力均减小。塑性应变首先出现在管顶,且塑性区随地表载荷、载荷作用长度增加而增大,随回填土体弹性模量及管道壁厚增大而逐渐减小;当内压为0~4MPa时,管道塑性应变及塑性区随内压的增大而减小。管道椭圆度随回填土体弹性模量、管道内压、壁厚增加而逐渐减小,随地表压载增大而增大。     

Mini-review on river eutrophication and bottom improvement techniques,with special emphasis on the Nakdong River

Water quality in rivers is vital to humans and to maintenance of biotic and ecological integrity. During the Four Major Rivers restoration of South Korea, remarkable attempts have been made to decrease external nutrient loads and moveable weirs were designed to discharge silt that may deposit in pools. However, recently eutrophication of the Nakdong River, which was limited to the lower reaches, is seen to be spreading upstream. The reduction of external nutrient loads to rivers is a long-term goal that is unlikely to lead to reductions in algal blooms for many years because of the time required to implement effective land management strategies. It would therefore be desirable to implement complementary strategies. Regulating the amount of water released is effective at preventing algae blooms in weir pools; so, the relationship between discharge, stratification and bloom formation should be understood in this regard. However, pollutants are likely to accumulate in the riverbed upstream from release points. Thus, to control phosphorus levels, total phosphorus density should be lowered by applying in-river techniques as well. As many ecosystem properties are controlled by multiple processes, simultaneous river bottom improvement techniques, such as combined dissolved oxygen supply and nutrient inactivation, are likely to be effective. The purpose of this review is to present a series of technological approaches that can be used to improve the river bottom area and hence sediment nutrient release, and to illustrate the application of these techniques to the Nakdong River.     

The effects of sediment-laden waters on irrigated lands along the lower Yellow River in China

Expansion of irrigation in the Yellow River (Huang He in Chinese) Basin of China is a major accomplishment of the post-revolutionary period in China. Irrigation reliance on the Yellow River was anticipated to not only supply greater reliability of water for crops, but also to improve the productivity of aeolian, saline and alkali soils because of the high sediment loads in the river. Irrigation expansion also was a significant factor in affecting human modification of the landscape ecosystem in the lower reaches of the Yellow River. Based on field investigation and sampling of the amount and distribution of used suspended sediment load in irrigated areas, this paper analyzes the impact of the suspended sediment on soil texture, fertility and salinity and the consequences to the landscape ecosystem. Results indicate that soil quality has indeed been improved through irrigation and related deposition of sediment, but some local problems created by long periods of irrigation should not be ignored in the future.     

热电池失效分析及等效加速贮存试验技术

目的建立基于实测环境载荷的热电池等效加速贮存试验技术,掌握其在环境载荷作用下的性能退化规律。方法在分析热电池组成和所受环境载荷情况的基础上,分析热电池的主要失效模式,设计基于实测环境数据的等效加速贮存试验,开展热电池等效加速贮存试验,分析热电池性能和热图像的变化情况,利用粒子滤波算法对电池剩余电容量进行预测。结果随加速循环次数(时间)的增加,热电池的电容量下降。热图像表明,热电池经过等效加速贮存试验后,其放电过程表面温度要高于初始放电表面温度。粒子滤波算法能够有效模拟电容量的退化过程,电池剩余电容量预测结果与试验结果误差在10%以内。结论等效加速贮存试验得到了热电池的性能退化规律,从而为热电池的贮存试验提供一种解决方案。     

滇中高原水库外源污染负荷贡献解析与环境容量核算

为探究高原型水库上游流域的污染负荷来源及其贡献率,并计算水库的水环境容量,以云南高原柴石滩水库为研究对象,应用排污系数法估算了水库上游流域污染来源,运用水文和水质同步监测资料计算入库污染负荷,采用富营养化模型核算了不同水质目标情景下水库TN和TP的最大容量.结果表明：(1)柴石滩水库及其以上流域主要特征污染物为TN和TP;(2)水库上游流域的COD和TP主要来源于农村面源污染,贡献率分别为49.40%和50.11%; NH⁺₄-N和TN主要来源于城镇生活污染,贡献率分别为45.76%和33.77%;农村面源污染贡献中,陆良县COD和TP贡献率最大,分别为34.82%和36.82%;城镇生活污染贡献中,麒麟区COD、 NH⁺₄-N、 TN和TP贡献率最大,均高达65%.(3)COD、 NH⁺₄-N、 TN和TP污染负荷入河量分别为28 050.90、2 465.16、4 680.54和870.93 t·a^-1,TN和TP污染负荷入库量分...