中国东部春季一次强冷锋活动空气污染输送过程分析

利用CMAQ(4.7.1)和HYSPLIT后向轨迹模式,结合长岛和洪泽湖站点污染物观测数据,对2011年3月31日—4月3日影响我国东北部地区的一次典型强冷锋天气空气污染过程进行模拟分析,验证表明模式能较好地模拟此次强冷锋过程. 由结果可知,此次强冷锋前后污染物浓度呈先升后降又上升的现象. 在冷锋移动过程中,锋前出现一条高浓度污染带,锋面将污染物抬升至800～500 hPa的高度,使污染物在对流层中层快速向西太平洋传输;冷锋对当地污染物的去除不仅有水平方向的推动作用,还会使污染物向高空输送. 锋面过后污染物浓度急剧降低,冷锋对长岛站点SO₂、O₃、NO_x、PM_2.5的清除率分别为90.87%、34.10%、50.56%、72.69%,对洪泽湖站点则分别为82.53%、50.45%、65.11%、36.80%. 锋面过去1~2 d后,高压控制天气形势下污染物再次开始积累、浓度回升. 冷锋前后污染物形成一个“积累—锋前抬升—高空平流输送—锋后大风清除—积累”的循环.      

初冬一次冷锋输送过程对中国东部霾天气的影响

利用常规地面气象资料、NCEP/NCAR再分析资料以及全国PM_2.5浓度数据,并结合后向轨迹、空气污染输送指数和传输通量分析,针对2019年12月10~11日一次冷锋输送造成我国中东部地区出现的大范围霾天气过程进行了分析.结果表明：（1）霾期间高空500hPa以经向环流为主,伴随着高空低压槽引导地面冷锋向东南方向移动,污染物浓度大值区也依次由华北地区移至黄淮、江淮地区.（2）冷锋过境前,华北至长江三角洲区域PM_2.5浓度均有明显增涨;北京以偏南方向的污染物输入为主,济南以西北和偏东方向输入为主,南京则主要是偏北和偏西方向的输入.（3）冷锋过境时,冷空气迅速将北京站的污染物清除;而济南站则受高压底部偏东风回流的影响,PM_2.5浓度维持在50μg/m³左右;冷锋推进至南京站时西北风已较小,对污染物的清除作用不明显.以江苏省为例,整个过程中,江苏本地污染物贡献占25.8%,江苏以外的污染物贡献占74.2%,以输送为主.（4）冷锋过境后,3站的边界层结构也略有不同,北京站的逆温层迅速被打破;济南站由于受海上暖湿平流影响,近地面由等温层变成逆温层;而南京站的近地面则由逆温层变为等温层.本研究揭示了在冷锋南下过程中,上游污染物对下游地区的影响,以及南北方站点表现出不同的污染物变化和清除特征.     

长江苏州段岸线资源利用遥感调查与GIS分析评价

了解岸线资源利用现状,科学、合理地评价岸线资源条件是实施沿江开发战略、建立沿江基础产业带、科学合理地确定沿江产业布局的前提和基础。利用高分辨率卫星影像,通过影像融合,快速发现目标靶区,精确确定岸线占用单位的空间位置与几何形状;运用GIS分析技术,弄清长江岸线江苏段的资源与利用现状,选取科学合理的评价单元,对研究区内的岸线资源进行评价,为长江岸线苏州段的合理利用与开发提供重要的参考依据。     

前地板工艺分析及修边冲孔模具设计

介绍了冲压上常见的大型覆盖件的冲压工艺方案的确定过程 ,并以S0 1农用皮卡车“前地板”为例 ,针对此件外形复杂 ,成形深度大 ,模具加工周期大 ,成本高等问题 ,进行了详细的冲压工艺分析 ,确定了合理的冲压工序 ,且着重介绍了修边冲孔模具的设计要点及简化模具加工工艺 ,降低模具成本 ,缩短制模周期等措施     

Age-Dependent Factors Affecting Thoracic Response: A Finite Element Study Focused on Japanese Elderly Occupants

Objectives: The ultimate goal of this research is to reduce thoracic injuries due to traffic crashes, especially in the elderly. The specific objective is to develop and validate a full-body finite element model under 2 distinct settings that account for factors relevant for thoracic fragility of elderly: one setting representative of an average size male and one representative of an average size Japanese elderly male.

Methods: A new thorax finite element model was developed from medical images of a 71-year-old average Japanese male elderly size (161cm, 60 kg) postmortem human subject (PMHS). The model was validated at component and assembled levels against original series of published test data obtained from the same elderly specimen. The model was completed with extremities and head of a model previously developed. The rib cage and the thoracic flesh materials were assigned age-dependent properties and the model geometry was scaled up to simulate a 50th percentile male. Thereafter, the model was validated against existing biomechanical data for younger and elderly subjects, including hub-to-thorax impacts and frontal impact sled PMHS test data. Finally, a parametric study was conducted with the new models to understand the effect of size and aging factors on thoracic response and risk of rib fractures.

Results: The model behaved in agreement with tabletop test experiments in intact, denuded, and eviscerated tissue conditions. In frontal impact sled conditions, the model showed good 3-dimensional head and spine kinematics, as well as rib cage multipoint deflections. When properties representative of an aging person were simulated, both the rib cage deformation and the predicted number of rib fractures increased. The effects of age factors such as rib cortical thickness, mechanical properties, and failure thresholds on the model responses were consistent with the literature. Aged and thereby softened flesh reduced load transfer between ribs; the coupling of the rib cage was reduced. Aged costal cartilage increased the severity of the diagonal belt loading sustained by the lower loaded rib cage.

Conclusions: When age-specific parameters were implemented in a finite element (FE) model of the thorax, the rib cage kinematics and thorax injury risk increased. When the effect of size was isolated, 2 factors, in addition to rib material properties, were found to be important: flesh and costal cartilage properties. These 2 were identified to affect rib cage deformation mechanisms and may potentially increase the risk of rib fractures.     

不同坡度对正庚烷流淌火燃烧特性的影响

针对液体燃油储运过程中泄漏引发的火灾爆炸事故,设计并搭建流淌槽坡度可调式液体燃油流淌火燃烧试验平台,开展连续泄漏正庚烷流淌火试验。选择水平表面(0°)流淌试验作为基准,改变流淌槽的坡度(0.5°,1°和3°),研究分析不同泄漏速率下连续泄漏正庚烷流淌火的燃烧面积、燃烧速率等燃烧特征参数的变化规律。结果表明:1)连续泄漏正庚烷流淌火燃烧特征参数均随泄漏速率增加而明显增加;2)坡度对连续泄漏正庚烷流淌火燃烧特性影响显著,即使流淌槽坡度增加0.5°,其燃烧特性即发生明显改变;3)连续泄漏正庚烷流淌火的平均稳定燃烧速率随流淌槽坡度的增加反而减小。     

Optimal water quality monitoring network design for river systems

Typical tasks of a river monitoring network design include the selection of the water quality parameters, selection of sampling and measurement methods for these parameters, identification of the locations of sampling stations and determination of the sampling frequencies. These primary design considerations may require a variety of objectives, constraints and solutions. In this study we focus on the optimal river water quality monitoring network design aspect of the overall monitoring program and propose a novel methodology for the analysis of this problem. In the proposed analysis, the locations of sampling sites are determined such that the contaminant detection time is minimized for the river network while achieving maximum reliability for the monitoring system performance. Altamaha river system in the State of Georgia, USA is chosen as an example to demonstrate the proposed methodology. The results show that the proposed model can be effectively used for the optimal design of monitoring networks in river systems.     

Simulating Nitrate Leaching Profiles in a Highly Permeable Vadose Zone

An approach is developed to simulate leaching of a dissolved chemical constituent in the vadose zone of an aquifer. Specifically, nitrate loading at the water table for different water table depths, for a range of aquifer permeability values, and for different cases of heterogeneity of the aquifer, are considered. Models from the literature are first used to derive soil–water characteristic curves (water retention and hydraulic conductivity) from a grain size distribution curve for unsaturated conditions. Given infiltration from the surface, the initial conditions for the chemical concentration, and the water content profile, leaching of the chemical in the vadose zone is simulated as a function of both time and depth. The methodology is illustrated for a permeable aquifer. Simulations are undertaken using a finite element code for saturated and unsaturated flow. Different scenarios are simulated depending on the heterogeneity of the aquifer and the depth of the water table. Modeling results show that in the example case studied, nitrate concentration loading at the water table does not depend strongly on the position of the water table, but rather on the material properties of the aquifer. The contribution of this endeavor resides in the methodology which allows a prediction of nitrate leaching using only the grain size property of the aquifer. It allows practitioners to obtain a first assessment of leaching with limited data.     

Flame acceleration in unconfined hydrogen/air deflagrations using infrared photography

Flame behavior and blast waves generated during unconfined hydrogen deflagrations were experimentally studied using infrared photography. Infrared photography enables expanding spherical flame behaviors to be measured and flame acceleration exponents to be evaluated. In the present experiments, hydrogen/air mixtures of various concentrations were filled in a plastic tent of thin vinyl sheet of 1 m³ and ignited by an electric spark. The onset of accelerative dynamics on the flame propagation was analyzed by the time histories of the flame radius and the stretched flame speed. The results demonstrated that the self-acceleration of the flame, which was caused by diffusional-thermal and hydrodynamic instabilities of the blast wave, was influenced by hydrogen deflagrations in unconfined areas. In particular, it was demonstrated that the overpressure rapidly increased with time. The burning velocity acceleration was greatly enhanced with spontaneous-turbulization.     

轿车前制动噪声降噪方案研究

本文针对轿车出现的前制动噪声问题进行了研究和改进,以及采取改进方案后是否会对制动性能造成影响进行了系统的阐述。