Trimethylbenzoic acids as metabolite signatures in the biogeochemical evolution of an aquifer contaminated with jet fuel hydrocarbons

Evolution of trimethylbenzoic acids in the KC-135 aquifer at the former Wurtsmith Air Force Base (WAFB), Oscoda, MI was examined to determine the functionality of trimethylbenzoic acids as key metabolite signatures in the biogeochemical evolution of an aquifer contaminated with JP-4 fuel hydrocarbons. Changes in the composition of trimethylbenzoic acids and the distribution and concentration profiles exhibited by 2,4,6- and 2,3,5-trimethylbenzoic acids temporally and between multilevel wells reflect processes indicative of an actively evolving contaminant plume. The concentration levels of trimethylbenzoic acids were 3-10 orders higher than their tetramethylbenzene precursors, a condition attributed to slow metabolite turnover under sulfidogenic conditions. The observed degradation of tetramethylbenzenes into trimethylbenzoic acids obviates the use of these alkylbenzenes as non-labile tracers for other degradable aromatic hydrocarbons, but provides rare field evidence on the range of high molecular weight alkylbenzenes and isomeric assemblages amenable to anaerobic degradation in situ. The coupling of actual tetramethylbenzene loss with trimethylbenzoic acid production and the general decline in the concentrations of these compounds demonstrate the role of microbially mediated processes in the natural attenuation of hydrocarbons and may be a key indicator in the overall rate of hydrocarbon degradation and the biogeochemical evolution of the KC-135 aquifer.     

加热位置对沼气罐温度场影响的实验和模拟

为了使沼气罐内有一个相对均匀的温度环境、提高沼气的产气效率,通过改变沼气罐内的加热位置,找出能使沼气罐内温度场均匀的加热位置,减小罐内温度梯度过大对发酵造成的影响。用实验研究和数值模拟相结合的方法,研究沼气罐内的温度场分布情况,结果表明,中部加热较上部加热和下部加热能取得良好的罐内温度场,温度梯度较小,使罐内上、中、下各部分温度分别维持在33.95、34.02和33.6℃,比传统的采用下部换热能取得更好的温度场。     

纳米铁对微生物燃料电池启动的影响

设置3组不同阳极底物的微生物燃料电池（microbial fuel cell,MFC）：无添加污泥（对照组）、含化学合成零价纳米铁的污泥（c-nZVI组）和含绿色合成零价纳米铁的污泥（g-nZVI组）,拟探究不同来源零价纳米铁（nZVI）对MFC启动的影响。3组MFC经由5个周期启动,实验结果表明,在c-nZVI组和g-nZVI组的启功阶段,高浓度的绿色合成零价纳米铁和化学合成零价纳米铁均对MFC的输出电压产生抑制作用,当MFC成功启动后,零价纳米铁对MFC的输出电压影响不明显。此外,COD去除率、SEM和电化学表征数据表明,绿色合成零价纳米铁相比于化学合成零价纳米铁在电极表面富集程度、对电极表面性质改变以及产电菌活性的抑制作用更弱。     

爆炸荷载作用下钢筋混凝土防爆墙动力响应研究

为了研究钢筋混凝土防爆墙的抗爆能力,采用有限元分析方法对不同纵向配筋率、不同高跨比、不同厚度的墙体在爆炸动态荷载作用下的动力响应进行研究,对各种不同设置的钢筋混凝土防爆墙的抗爆性能进行评估。结果表明:减小高跨比对提高钢筋混凝土防爆墙的抗爆能力最为重要,提高纵向配筋率,增加厚度都能增加防爆墙的抗爆能力。     

Effect of admixture of solid inertant on fire hazard of dust layers oriented at varying degrees of inclination

Unlike metallic dust layers, the layer flammability levels (LFL) of non-metallic dust layers exhibit a wide range from Class 1 (No self-sustained combustion) to Class 6 (explosive combustion). However, determinations of layer flammability have not considered the effect of inclination angle, thereby potentially underestimating fire hazard of combustible dust layers in many industrial situations. In this research, inclined dust layers showed greater fire hazard than did horizontally oriented dust layers. For example, LFL of wood dust jumped from class 3 to class 5 when layers were positioned with an incline. Flame spread rate of PMMA dust layers increased from 1.8 to 3.6 mm/s when the angle of inclination increased from 0 to 40°. Even small amounts of solid inertant significantly decreased surface layer fires. The required amount of inertant to completely inert layer fires was far less than that for smoldering layer fires or dust explosions.     

Effects of compression ratio,swirl augmentation techniques and ethanol addition on the combustion of CNG–biodiesel in a dual-fuel engine

The diminishing resources and continuously increasing cost of petroleum in association with their alarming pollution levels from diesel engines has led to an interest in finding alternative fuels to diesel. Emission control and engine efficiency are two of the most important parameters in current engine design. The impending introduction of emission standards such as Euro IV and Euro V has forced research towards developing new technologies for combating engine emissions. This paper examines the effects of compression ratio, swirl augmentation techniques and ethanol addition on the combustion of compressed natural gas (CNG) blended with Honge oil methyl esters (HOME) in a dual fuel engine. The present results show that the combustion of HOME and 15% ethanol blend with CNG induction in a dual-fuel engine operated in optimized parameters at an injection timing of 27° Before Top Dead Centre and a compression ratio of 17.5 resulted in acceptable combustion emissions and improved brake thermal efficiencies. The implementation of swirl augmentation techniques increased brake thermal efficiencies (BTEs) and considerably reduced combustion emissions such as smoke, HC, CO and NO_x. The addition of ethanol also increased BTEs. However, at more than 15% of ethanol in HOME, NO_x emissions increased dramatically.     

碳布负载的Co3O4纳米片阵列阳极对微生物燃料电池产电性能的影响

微生物燃料电池（MFCs）是一种在处理废水的同时产生电能的新型装置,阳极作为产电微生物富集、电子产生和传递的区域对提高MFCs的性能具有至关重要的作用。以碳布负载的四氧化三钴多孔纳米片阵列(Co₃O₄/CC)作为阳极,探究了可调控的纳米片孔缺陷对MFCs产电性能的影响。结果表明：Co₃O₄/CC阳极的产电性能显著优于碳布,且正比于Co₃O₄纳米片的孔隙率;液固界面处的电荷传递电阻(R_ct)由729.20 Ω降至43.48 Ω,所获得的最大功率密度由1275 mW·m⁻²增加至1547 mW·m⁻²。本研究开发了一种孔结构可控的金属氧化物负载碳布策略,所制备的高性能阳极材料可为MFCs的性能提升提供参考。     

气泡尺寸对清洗固体表面油脂及颗粒污染物的影响

为明确气泡清洗技术在罐底油泥清洗中的应用情况,考察了气泡尺寸差异对固体表面清洗效果的影响。搭建了玻璃表面油污气泡清洗可视化实验装置,并设计了气泡发生器。该发生器可通过调节气液比产生多种尺寸分布的气泡。实验中产生的气泡直径分布于80~1 200 μm。研究了气泡尺寸、清洗时间、距离和角度等参数对清洗效果的影响,结果表明,在液体流量为2.5 L·min⁻¹条件下,清洗去除率随气泡尺寸的增大而提高,气泡的平均直径为800 μm时的清洗效果最好,能够将去除率从用水清洗的4.5%提高到68.3%,且当基底与水流方向为45°时的清洗去除率高于垂直或平行放置。上述结果说明,气泡撞击和破裂产生的水射流和涡流冲刷作用是主要的清洗机制。本研究结果可为高效处理油泥污染问题提供理论和实践参考,为罐底油泥清洗开拓新的解决路径。     

改进型农村三格化粪池的污水处理性能

在我国农村地区,化粪池仍然是许多家庭生活污水直排前的唯一处理设施。传统三格化粪池出水水质较差,造成了农村水环境污染,而对传统三格化粪池进行适当改进是解决污染问题的有效途径之一。为此,对传统三格化粪池进行了结构和功能的优化设计,在第1格设置由过流板隔开的预处理曝气池和预处理沉淀池,第2格保留厌氧发酵池,第3格由过流板分隔为生物接触氧化池和二次沉淀池。结果表明,稳定运行后,反应器对COD、${\rm{NH}}_4^ + $-N、TP和SS的去除率分别为83.51%~88.56%、66.82%~74.17%、77.47%~81.12%和82.26%~88.57%,相较于传统三格化粪池有显著的提升。改进型农村三格化粪池实现了农村分散式污水的就地处理,且经济性和维护便利性符合农村污水处理设施的定位需求,可为农村三格化粪池的改造和新建提供参考。     

不锈钢纤维毡改性材料的制备及在微生物燃料电池中的应用

为制备一种导电性高、生物相容性良好且耐腐蚀的阳极材料,提高微生物燃料电池(MFC)的产电性能,以不锈钢纤维毡(SSFF)为基底,采用水热反应法制备了还原氧化石墨烯/不锈钢纤维毡(RGO/SSFF),并进一步采用粉体烧结法将纳米二氧化钛(TiO₂)负载至RGO/SSFF,制备了二氧化钛/还原氧化石墨烯/不锈钢纤维毡(TiO₂/RGO/SSFF),将SSFF(对照)、RGO/SSFF和TiO₂/RGO/SSFF分别作为MFC的阳极(对应的MFC分别命名为MFC-CK、MFC-RG和MFC-TRG)以探究改性材料对MFC去除水体中耗氧有机物和产电性能的影响。结果表明：与SSFF相比,RGO/SSFF和TiO₂/RGO/SSFF具有更大的电容(Q为413.9 mF和446.9 mF),更小的界面转移电阻(R_ct为19.65 Ω和18.16 Ω),更高的交换电流密度(i₀为1.56×10⁻⁵ mA和2.07×10⁻⁴ mA);MFC-TRG对水体COD去除速率最高可达929.62 mg·(L·d)⁻¹;MFC-RG和MFC-TRG稳定输出电压分别为245 mV和280 mV,比MFC-CK提高了88.5%和115.4%;MFC-RG和MFC-TRG的功率密度输出分别为 337.50 mW·m⁻²和472.03 mW·m⁻²,比MFC-CK提高了163.9%和233.9%。由此可知,改性后的RGO/SSFF和TiO₂/RGO/SSFF阳极成功提高了MFC的产电性能。该研究结果可为后续MFC阳极改性研究提供参考。