电子制冷预浓缩仪-气相色谱-质谱法测空气中含硫化合物

建立电子制冷预浓缩仪-气相色谱-质谱法测定空气中10种含硫化合物的方法。经考察不同采样容器、优化预处理条件、研究样品保存等获得了最佳实验条件,并通过实际样品的测定,考察了方法的适用性。结果表明:硫化氢、甲硫醇和乙硫醇3种高活性含硫化合物校准曲线线性回归系数在0.990以上,另外7种含硫化合物在0.995以上;高、中、低空白加标样品相对标准偏差均为9.5%以内,乙硫醇由于具有高活性和吸附性,低浓度空白加标回收率为63%,其余组分回收率范围为83%~110%;当进样体积为400 mL时,各目标化合物的方法检出限为0.2×10^-3~1.1×10^-3 mg/m³。分析污水处理厂无组织排放监控点的空气结果显示,该方法具有较低的检出限及较强的抗干扰能力,能较好地满足目前监测工作的要求。     

Changes in electrical generator cooling systems: Are they cost-effective sources of water now and under climate change?

In the United States, thermal power plant electrical generators (EGs) are large water diverters and consumptive users who need water for cooling. Retrofitting existing cooling systems to dry cooling and building new facilities with dry cooling can save water and reduce EG's vulnerability to drought. However, this can be an expensive source of water. We estimate that the cost of water saved by retrofitting cooling in existing EGs ranges from $0.04/m³ to $18/m³ depending on facility characteristics. Also water savings from building new EGs with dry cooling ranges in cost per unit water from $1.29/m³ to $2.24/m³. We compare costs with that for water development projects identified in the Texas State Water Plan. We find the water cost from converting to dry cooling is lower than many of the water development possibilities. We then estimate the impact of climate change on the cost of water saved, finding climate change can increase EG water use by up to 9.3% and lower the costs of water saved. Generally, it appears that water planners might consider cooling alterations as a cost competitive water development alternative whose cost would be further decreased by climate change.     

A discussion to promote global sustainability techniques for motivating plastic waste to minimize carbon footprints

This paper emphasizes the significant challenges facing the sustainable environment, including managing and handling plastic waste and reducing carbon footprints. To tackle these challenges, it is essential to identify people's awareness levels of waste handling techniques and their pro-environmental behaviors. The study focuses on Guwahati, one of the most important cities in Northeast India, which generates increasing plastic waste daily. The paper aims to identify the factors contributing to the reduction of carbon footprints resulting from plastic waste management activities. The data collected from 1326 respondents was analyzed using factor analysis, and the reliability of the dataset was confirmed using Cronbach's alpha (0.84 for the awareness level of waste management techniques and 0.780 for the prevalent mode of plastic waste management techniques). KMO (0.796), Bartlett's test of sphericity (p < 0.001), and determinant score (0.019) were used to assess the data adequacy and factorability of the dataset, and the results were found to be satisfactory. Principal component analysis, exploratory factor analysis, and varimax orthogonal rotation method were used to identify high-loaded factors by reducing the number of variables. The results showed that two highly loaded components, namely awareness level of waste management techniques (AWMT) and prevalent mode of plastic waste management techniques (PWMT), explained 27.53% and 24.34% of the total variance, respectively, with eigenvalues of 3.35 and 2.88. The regression model confirmed the statistical significance of these factors (p < 0.001) and their relationship with the dependent variable, greenhouse reduction (GHGR). The study proposes that minimizing carbon footprints in the environment can be achieved by focusing on a limited number of controllable factors such as AWMT and PWMT. This study provides valuable insights to the authorities in controlling waste generation and achieving a pollution-free environment.     

软锰矿浆烟气脱硫反应器试验研究

研究了喷射鼓泡反应器 (JBR)的桨叶直径、桨叶埋深和气体喷射管分布等结构参数对脱硫率和锰浸出率的影响 ,从而优化了反应器结构。     

电流密度对BDD电极电化学矿化吲哚的影响与机制

掺硼金刚石膜(BDD)电极电化学氧化法是去除难降解有机污染物的有效手段.与总有机碳(TOC)等的测定相比,气态中间产物的逸出量能够更直观有效地反映有机物的矿化程度与去除效果.本研究以吲哚为代表性污染物,通过对比不同电流密度(10、20和30 m A·cm-2)下BDD电极对吲哚的去除率与矿化率,结合降解过程中碳和氮形态的变化与守恒情况,分析吲哚的降解机制.结果表明,BDD电极对吲哚有良好的去除效果,电流密度为10、20、30 m A·cm-2时,吲哚达到100%去除的时间分别为8、5和4 h;TOC去除率、CO_2产生量均随电流密度的增加而增大,证明矿化率与电流密度成正相关;电解产生的CO_2气体与TOC、无机碳(TIC)构成了碳守恒体系.4~5 h时,体系TOC、TON和CO_2产生量均没有变化,表明电解产生的靛红具有较高的稳定性,此时为中间产物积累阶段;XPS表征进一步证实了中间产物靛红、苯醌等在电极表面的吸附,随着电解时间的延长,这些吸附的中间产物可进一步被降解.本研究从气态产物检测及碳氮形态分析与守恒的角度阐释吲哚矿化过程,对于辅助揭示有机物的电解过程有重要意义.     

循环冷却水处理中臭氧的杀菌作用

臭氧作为强氧化剂可以用于循环冷却水的处理中.试验研究了影响臭氧杀菌的基本因素,冷却水的pH和水温对处理效果基本没有影响.臭氧的杀菌能力取决于水中的剩余臭氧浓度,臭氧的消耗量与系统中的微生物数量有关.当水中剩余臭氧浓度为0.05mg/L和接触时间为14min时,可以使臭氧的灭菌力达99%.即在循环冷却水系统中,投加0.05mg/L臭氧,就可以控制系统中微生物的生长.由此确定了循环水处理过程中为控制系统中微生物的生长所需维持的最低臭氧浓度.     

火灾后套筒灌浆料力学性能试验研究

为研究火灾对套筒灌浆料力学性能的影响,设计不同受火时间(60,90 min),不同静置时间(1,14 d)以及不同冷却方式(自然冷却、喷水冷却)试验,分析不同工况下的套筒灌浆料的抗折强度和抗压强度.结果表明:随着受火时间的增加,套筒灌浆料的抗折、抗压强度均逐渐降低,自然冷却后抗折强度残余率分别为11.3％、9.1％,抗...     

Ce/Zr系列催化剂上碳颗粒物燃烧行为

分别在TG和TPO上考察了CeO₂,ZrO₂及不同Ce/Zr比的CexZr1-xO₂固溶体催化剂上soot的燃烧性能,同时考察了反应气氛对活性的影响.结果表明:Ce基催化剂能明显降低soot的起燃温度,Ce/Zr比的不同导致Ce_xZr_1-xO₂催化剂性能的差异.反应的速度控制步骤随O₂浓度的不同而改变;H₂O对Ce_0.5Zr_0.5O₂上soot的氧化活性基本没有影响;由于NO氧化产生的NO₂具有更强的的氧化能力,因此NO对soot的燃烧具有促进作用,起燃温度降低了30℃.催化剂上的β氧种参与了soot燃烧过程.     

Investigation into the nonlinear damage model of coal containing gas

By taking the nonlinear deformation properties of coal into consideration, the nonlinear constitutive equation was founded. And in view of the compressible property of gas, the idea of compressive energy of gas was introduced. According to the continuous damage theory and mesoscopic damage theory, it is assumed that the damage variable has a power function relation with the porosity. By applying the thermodynamics energy conservation laws, a new nonlinear damage constitutive model of coal containing gas was deduced, and the correctness of the new model was verified by comparing with the former experimental results. This model can provide theoretical reference for understanding and solving these dynamic gas disasters such as coal and rock outburst. Moreover, based on this theory, prevention and control measures will be adopted to deal with the dynamic gas disasters according to ever-changing mining conditions.     

2 000 m超深水水下分离器泄漏油气扩散特性研究

深水水下分离器服役过程中由于腐蚀、地质灾害和环境高压作用,存在失效泄漏风险。针对2 000 m超深水水下分离器可能存在的失效泄漏问题,基于计算流体动力学CFD方法,建立分离器失效泄漏后果数值仿真分析模型,对分离器泄漏场景进行模拟与分析,研究2 000 m水深条件下分离器泄漏油气扩散规律,并考虑不同泄漏位置对油气扩散行为的影响。结果表明:水下分离器泄漏包括压力扩散和自由扩散两个阶段,压力扩散阶段历时极短,自由扩散阶段耗时较长;泄漏口位置对泄漏结果有较为明显的影响,分离器上部泄漏,油气全部溢出,分离器中下部泄漏,大部分油气保留于分离器内部,最终形成分明的油气水界面;分离器内部压力随时间迅速上升,t=0.25 s左右接近于20 MPa,后期在20 MPa左右呈极微小波动,泄漏速率随分离器内部压力增大迅速减小,达到最低点之后,呈微小波动状变化。