日照市畜牧业生产对环境的污染及其防治措施研究

畜禽粪便中大量有机污染物污染着人们赖以生存的土壤和水体,粪尿分解产生的大量有害气体污染了大气。本文结合日照市畜牧业生产的实际,对日照市畜牧业生产对环境的污染现状进行了分析,找出了日照市畜牧业生产对环境污染产生的主要原因和存在问题,提出畜牧业生产对环境污染的防治对策。     

Streambank Soil and Phosphorus Losses Under Different Riparian Land‐Uses in Iowa1

Abstract: Phosphorus and sediment are major nonpoint source pollutants that degrade water quality. Streambank erosion can contribute a significant percentage of the phosphorus and sediment load in streams. Riparian land‐uses can heavily influence streambank erosion. The objective of this study was to compare streambank erosion along reaches of row‐cropped fields, continuous, rotational and intensive rotational grazed pastures, pastures where cattle were fenced out of the stream, grass filters and riparian forest buffers, in three physiographic regions of Iowa. Streambank erosion was measured by surveying the extent of severely eroding banks within each riparian land‐use reach and randomly establishing pin plots on subsets of those eroding banks. Based on these measurements, streambank erosion rate, erosion activity, maximum pin plot erosion rate, percentage of streambank length with severely eroding banks, and soil and phosphorus losses per unit length of stream reach were compared among the riparian land‐uses. Riparian forest buffers had the lowest streambank erosion rate (15‐46 mm/year) and contributed the least soil (5‐18 tonne/km/year) and phosphorus (2‐6 kg/km/year) to stream channels. Riparian forest buffers were followed by grass filters (erosion rates 41‐106 mm/year, soil losses 22‐47 tonne/km/year, phosphorus losses 9‐14 kg/km/year) and pastures where cattle were fenced out of the stream (erosion rates 22‐58 mm/year, soil losses 6‐61 tonne/km/year, phosphorus losses 3‐34 kg/km/year). The streambank erosion rates for the continuous, rotational, and intensive rotational pastures were 101‐171, 104‐122, and 94‐170 mm/year, respectively. The soil losses for the continuous, rotational, and intensive rotational pastures were 197‐264, 94‐266, and 124‐153 tonne/km/year, respectively, while the phosphorus losses were 71‐123, 37‐122, and 66 kg/km/year, respectively. The only significant differences for these pasture practices were found among the percentage of severely eroding bank lengths with intensive rotational grazed pastures having the least compared to the continuous and rotational grazed pastures. Row‐cropped fields had the highest streambank erosion rates (239 mm/year) and soil losses (304 tonne/km/year) and very high phosphorus losses (108 kg/km/year).     

Integrated Modular Modeling of Water and Nutrients From Point and Nonpoint Sources in the Patuxent River Watershed1

Abstract: We present a simple modular landscape simulation model that is based on a watershed modeling framework in which different sets of processes occurring in a watershed can be simulated separately with different models. The model consists of three loosely coupled submodels: a rainfall‐runoff model (TOPMODEL) for runoff generation in a subwatershed, a nutrient model for estimation of nutrients from nonpoint sources in a subwatershed, and a stream network model for integration of point and nonpoint sources in the routing process. The model performance was evaluated using monitoring data in the watershed of the Patuxent River, a tributary to the Chesapeake Bay in Maryland, from July 1997 through August 1999. Despite its simplicity, the landscape model predictions of streamflow, and sediment and nutrient loads were as good as or better than those of the Hydrological Simulation Program‐Fortran model, one of the most widely used comprehensive watershed models. The landscape model was applied to predict discharges of water, sediment, silicate, organic carbon, nitrate, ammonium, organic nitrogen, total nitrogen, organic phosphorus, phosphate, and total phosphorus from the Patuxent watershed to its estuary. The predicted annual water discharge to the estuary was very close to the measured annual total in terms of percent errors for both years of the study period (≤2%). The model predictions for loads of nutrients were also good (20‐30%) or very good (<20%) with exceptions of sediment (40%), phosphate (36%), and organic carbon (53%) for Year 1.     

Method to Partition Between Attached and Unattached E. coli in Runoff From Agricultural Lands1

Abstract: Remediation of waters impaired by bacterial indicators is usually dictated by total maximum daily load plans, which are heavily dependent on fate and transport modeling of bacterial indicators. Nonpoint source pollution models are most frequently used to assess bacterial transport to surface waters and most models typically simulate bacterial transport as a dissolved pollutant. Previous studies have found that cells preferentially attach to sediments; however, a variety of techniques have been used to assess attachment including filtration, fractional filtration, and centrifugation. In addition, a variety of chemical and physical dispersion techniques are used to release attached and bioflocculated cells from particulates. Here we developed and validated an easy‐to‐replicate laboratory procedure for separation of unattached from attached E. coli which will also identify particle sizes to which E. coli preferentially attach. Physical and chemical dispersion techniques were evaluated and a combined hand shaker treatment for 10 min followed by dilutions in 1,000 mg/l of Tween 85 significantly increased total E. coli concentrations by 31% when compared with a control. In order to separate unattached from attached fractions, two commonly used techniques, fractional filtration, and centrifugation were combined. The filtration and centrifugation treatments did not reduce E. coli concentrations when compared with a control (p > 0.05), indicating that damage was not inflicted upon the E. coli cells during the separation procedure.     

安全评价方法在危险废物处置环境风险评价中的应用探讨

对安全评价方法在危险废物处置建设项目环境风险评价中的运用进行初步探索。主要用"工艺过程风险因素分析表"对工艺过程潜在风险性识别;用蒙德法进行源项分析;用池火灾模型、蒸气云爆炸伤害模型对易燃、易爆物质的火灾、爆炸等重大事故后果进行计算,得出人员的伤亡半径和财产损失半径等参数,以便于判断风险的可接受水平。分析结果表明:采用安全评价方法对危险废物处置建设项目进行环境风险评价是适用的、可行的。     

电子封装行业职业有害因素的辨识与分析

从电子封装行业工艺入手,依据国家颁布的职业有害因素分类目录及职业有害因素致病模型,针对电子封装行业插入式(DIP)及表面贴装(QFP/SOIC)制造工艺使用的材料、设备、条件、人员作业特点,对行业内具有共性的职业有害因素进行分析,对工艺过程中存在的职业有害因素作出辨识,并提出把硅粉尘、铅、氩气、高温、环氧树脂、氢氧化钾、噪声、酸雾、重复性静态作业、重复性动态作业等有害因素作为防控重点,为电子封装行业职业有害因素的危害量化评价及其防控措施制定提供了科学依据。     

格栅类通透性吊顶对水喷淋控火性能影响的实验研究

通过实验研究了格栅类通透性吊顶对水喷淋控火性能的影响,并利用燃料燃尽时间来计算控火有效性因子来量化这种影响.研究结果表明:格栅会降低水喷淋控火性能,与格栅类吊顶形式、喷头安装高度和工作压力流量有关.在确定的吊顶形式和尺寸下,存在着对控火性能影响最大的喷头安装高度.在实际工程应用中应根据具体格栅特性,合理设计喷头安装高度,以降低格栅的不利影响,保证水喷淋的控火有效性.     

冶金炉重大危险源辨识及其爆炸事故后果模拟

冶金炉的铁水、钢水温度高,国内外多次发生冶金炉爆炸事故,但现阶段根据《重大危险源辨识》(GB18218-2000)和《关于开展重大危险源监督管理工作的指导意见》(安监管协调字[2004]56号文)还无法判定其是否为重大危险源.运用爆炸学、热学等方法,提出了判定冶金炉是否为重大危险源的理论与方法,并给出了判定高炉是否为重大危险源的临界有效容积,判定转炉、混铁炉是否为重大危险源的临界公称吨位,最后通过VB编程对冶金炉进行了爆炸事故后果模拟,为冶金企业提供一定的参考价值.     

论重大危险源理论与实践之结合

重大危险源及其监管越来越受到关注,历经十多年,重大危险源的表述及其基本定义并没有取得共识而完全统一,现在开始实施重大危险源申报登记制度,涉及重大危险源的辨识、评价、分级等大量的具体工作,相关的理论和方法应用比较复杂。笔者就有关问题提出了自己的看法,认为重大危险源分级不仅是一项技术方法,而且是一项政策性行为,标准的制定一定要紧密联系实际,有利推动安全生产工作。     

Evaluation of a healthcare safety climate measurement tool

Problem

Psychometrically validated measurement tools are needed to evaluate an organization's safety climate. In 2000, Gershon and colleagues published a new healthcare safety climate measurement tool to determine its relationship to safe work behavior (Gershon, R., Karkashian, C., Grosch, J., Murphy, L., Escamilla-Cejudo, A., Flanagan, P., et al. (2000). Hospital safety climate and its relationship with safe work practices and workplace exposure incidents. American Journal of Infection Control, 28, 211-21). The present study evaluated the psychometric properties of the Gershon tool when modified to address respiratory rather than bloodborne pathogen exposures.

Method

Medical practitioners, nurses, and nurse aides (n = 460) were surveyed using the modified Gershon tool. Data were analyzed by factor analysis and psychometric properties of the tool evaluated.

Results

Eight safety climate dimensions were extracted from 25 items (Cronbach's alpha range: 0.62 - 0.88). Factor extractions and psychometric properties were reasonably consistent with those of the Gershon tool.

Impact on Industry

The Gershon safety climate tool appears to have sufficient reliability and validity for use by healthcare decision makers as an indicator of employee perceptions of safety in their institution.