Assessing the influence of urban geometry on noise propagation by using the sky view factor

The impact of traffic noise can be prevented by suitable planning measures. This study analyses the relationship between urban geometry and traffic noise, recognizing that the arrangement of buildings and streets greatly influences urban noise. The study was carried out in Braga, a medium-sized Portuguese city, by selecting locations with different urban geometries. At each site, the equivalent continuous sound level was measured. Furthermore, the urban geometry was evaluated by using the sky view factor, a parameter which shows the degree of sky obstructed by buildings. Results show an inverse proportionality between noise and the sky view factor. The highest noise levels were found in areas with a low sky view factor. The results also indicate that the sky view factor is a parameter which can potentially be used in research on urban noise.     

飞机驾驶舱人机几何适配性评价指标研究

飞机驾驶舱人机几何适配性评价对于保障人机效能的充分发挥和飞行安全至关重要。针对一些评价指标制定了相关标准和规范,但未形成一套可操作的指标体系。针对该问题,提出采用改进德尔菲法建立飞机驾驶舱人机几何适配性评价指标体系。通过对现有相关标准、规范和技术数据进行分析研究,初步确定出38个评价指标。针对确定的指标,聘请了飞过多种型号飞机的23名现役有经验飞行员作为专家咨询人员进行了两轮咨询,在对咨询结果进行统计处理的基础上,筛选出了21个评价指标,该指标体系的建立为飞机驾驶舱人机几何适配性综合评价奠定了基础,也可为航空工程部门的评价工作提供科学依据,并有一定的指导作用和实用价值。     

A MODIFIED RATIONAL FORMULA FOR FLOOD DESIGN IN SMALL BASINS1

ABSTRACT: New formulas and procedures under the framework of the Rational Formula are presented that are applicable to flood design problems for a small basin if the geometry of the basin can be approximated as an ellipse or a rhombus. Instead of making the assumption in the traditional rational formula that the rainfall is uniformly distributed in the whole duration (D_w) of a design storm, the new method modifies that assumption as: the rainfall is uniformly distributed only in each time interval CD) of the design storm hyetograph, thus extending the rational formula applicable to the case that the rainfall duration is less than the basin concentration time (T_c). The new method can be applied to estimate the flood design peak discharge, and to generate the flood hydrograph simultaneously. The derivation of the formulas is provided in detail in this paper, and an example is also included to illustrate how to apply the new formulas to the flood design problems in small basins.     

ALTERNATIVE APPROACH TO THE FORMULATION OF BASIN HYDRAULIC GEOMETRY EQUATIONS1

ABSTRACT: Along a drainage network, there is a systematic variation of average flow parameters (width, depth, and velocity) at flows having the same flow duration. Hydraulic geometry equations mathematically express this interdependent relationship of stream-flow characteristics for a basin for annual flow durations varying from 10 to 90 percent. However, the equations proposed so far have had rather poor predictive performance for low flows. An independent investigation of the variation of discharge with drainage area and annual flow duration demonstrates a consistent relationship between these parameters. The relationship for the high to median-flow range differs, however, from that for the median— to low-flow range. The proposed equations provide a better predictive performance for low flows than previous formulations and a versatile means of estimating flow parameters for streams throughout a basin. The improved basin hydraulic geometry equations have a wide range of applications in areas such as stream habitat assessment, water quality modeling, channel design, and stream restoration projects.     

3D geometric structures and biological activity: Application to microbial soil organic matter decomposition in pore space

During the past 10 years, soil scientists have started to use 3D Computed Tomography in order to gain a clearer understanding of the geometry of soil structure and its relationships with soil properties. We propose a geometric model for the 3D representation of pore space and a practical method for its computation. Our basic idea consists in representing pore space using a minimal set of maximal balls (Delaunay spheres) recovering the shape skeleton. In this representation, each ball could be considered as a maximal local cavity corresponding to the “intuitive” notion of a pore as described in the literature. The space segmentation induced by the network of balls (pores) was then used to spatialize biological dynamics. Organic matter and microbial decomposers were distributed within the balls (pores). A valuated graph representing the pore network, organic matter and distribution of micro-organisms was then defined. Microbial soil organic matter decomposition was simulated by updating this valuated graph. The method was implemented and tested using real CT images. The model produced realistic simulated results when compared with data in the literature in terms of the water retention curve and carbon mineralization. A decrease in water pressure decreased carbon mineralization, which is also in accordance with findings in the literature. From our results we showed that the influence of water pressure on decomposition is a function of organic matter distribution in the pore space. As far as we know, this is the approach to have linked pore space geometry and biological dynamics in a formal way. Our next goal will be to compare the model with experimental data of decomposition using different soil structures, and to define geometric typologies of pore space shape that can be attached to specific biological and dynamic properties.     

In vitro fungitoxic activity of some Schiff bases and their oxovanadium(IV) complexes

The oxovanadium(IV) (VO(IV)) complexes, Schiff bases, vanadyl sulphate, standard fungicides (bavistin and emcarb) and control (dimethyl sulphoxide) were tested for their in vitro fungitoxic activity on A. niger, F. oxysporum and A. flavus. The oxovanadium(IV) complexes show higher fungitoxic activity as compared with the free ligands, vanadyl sulphate and control (dimethyl sulphoxide), but moderate fungitoxic activity as compared with the standard fungicides (bavistin and emcarb). Oxovanadium(IV) complexes have been prepared with biologically active Schiff bases viz. the potassium salt of salicylidene-DL-alanine (sal-ala), 2,2′-bipyridylamine (bipym), bis(benzylidene)ethylenediamine (benen), thiophene-o-carboxaldeneaniline (tca), thiophene-o-carboxaldene-p-toluidine (tct), bis(benzylidene)-1,8-diaminonaphthalene (bendan) or bis(acetophenone)ethylenediamine (acphen). They have been characterized on the basis of elemental analysis, thermogravimetric analysis, magnetic measurements, electronic and infrared spectra. An octahedral geometry has been tentatively assigned to all the complexes.     

Effects of pollinator density-dependent preferences on field margin visitations in the midst of agricultural monocultures: A modelling approach

Managed field margins offer a means of reducing the impact of agricultural monocultures within intensively managed environments. By providing refuge for wild plants and the pollinators associated with them, field margins can also contribute to enhancing the pollination services within the monoculture. However, the effects of the monoculture on pollinator behaviour need to be carefully considered. It is known that pollinators may show density-dependent preferences such as neophobia (an avoidance of unfamiliar items) when different types of flower are available within their environment, and the dominance of monoculture crops within the environment may consequently have adverse effects upon the preferences shown by pollinators living in the field margins within them. In order to examine how pollinator preferences for wild flowers are affected by monocultures, we modelled the effects of density-dependent preferences, flower densities, and the geometry of field margins within a monoculture landscape using numerical simulations. This was done by considering how the placement of pollinator nests within a simple, spatially explicit landscape consisting of fields of monoculture crops separated by margins containing wild flowers affected the ratio of wild and monoculture crops experienced by the pollinator, given that it could only forage within a limited distance from its nest. Increasing field margin width and decreasing monoculture field width both led to an increase in pollinators visiting wild flowers (which levelled off as width increased). The size of the monoculture fields had little additional effect once they had passed an intermediate width. Increasing wild flower density within the margins led to a shift away from preferring monocultures. When wild flowers were at low densities compared to the monoculture, even the addition of small amounts of extra wild flowers had a large effect in shifting foraging preferences away from the monoculture. The distance which pollinators normally forage over only has an effect upon preferences for wild flowers when the travel distance is small. This suggests that careful consideration of margin design might be extremely important for those species which do not travel far. Innate preferences for density-dependence and particular crop types may also have an effect on preference behaviour. We demonstrate that the way in which resources are presented to indigenous pollinators may be extremely important in influencing where they choose to forage within agricultural landscapes. Careful margin design, as well as increasing the density of wild flowers (such as by enhancing the wild seed bank within the margins), may lead to overall improvements in ecosystem function within intensively farmed monocultures.     

山东省水系的分维几何学及其与新构造活动的关系

本文通过分析山东地区水系的分维几何学特征,对比各区域的新构造活动特点,发现隆起区和坳陷区的水系分维值不同,块体内部差异运动对水系分维有重要影响,断裂活动在水系分维值上有明显反映。