VEGF鳞片胶泥在烟气脱硫装置中的应用

本文介绍了高度耐腐蚀VEGF鳞片胶泥在烟气脱硫装置中的应用情况、耐蚀机理和特点。     

An attempt to recover economic losses from decadal changes in two lagoon systems of Sri Lanka through a newly patented mangrove product

Kahandamodara and Kalametiya are two estuarine lagoons located within about 12 km distance along the Southern coast of Sri Lanka. According to a socio-economic survey, both lagoons have been moderately to high saline water bodies and the latter was an important center of prawn fishery until the late 1960s. Two irrigation projects upstream (Udawalawe irrigation scheme and Muruthawela Wewa), which came into operation in 1967 and 1968 respectively, increased freshwater inflows to these two lagoons and altered flora, fauna, and water quality, with a decline of lagoon fishery as a result. At the same time, the increase in freshwater favorised the Mangrove Apple Sonneratia caseolaris to expand spontaneously. Following many hectares of vegetation increase of this species, our study focused on recovering the economic loss of fisheries decline by using new ethnobotanic information on this species. We found that the pulp of the fruit of the Mangrove Apple is tasty and can be used to prepare a fruit drink. However, it has not been commercialised, or even practiced widely at homes, due to the fact that numerous small seeds in the fruit release certain phenolic compounds when damaged, giving a bad colour and an astringent taste to the pulp. We developed a method to get the fruit pulp from the Mangrove Apple minimising the addition of phenolic compounds. This fruit pulp was then used to produce ice cream and fruit drinks, and the whole procedure has been patented in Sri Lanka for the favour of the local people. Apparently this is a novel mangrove product reported for the first time in mangrove ethnobotany. In addition, analysis of the fruit pulp of the S. caseolaris for nutritional composition revealed that it is very rich in phosphorus and dietary fiber, indicating that these new products may have an even higher potential as a supplementary food. Its use as a health food and as a commercialised eco-product is expected to bring new gains in spite of the former ecosystem and fishery decrease. It is however not known to which extent these novel ethnobiological/socio-economical uses outbalance functions lost by ecosystem degradation.     

纳米TiO_2纤维的制备及其光催化降解甲醛研究

以胶原纤维为模板制备纳米TiO2纤维用于光助催化降解甲醛气体,用扫描电镜(SEM)、X射线衍射(XRD)和N2吸附-脱附技术对纳米TiO2纤维进行了表征。结果表明,纳米TiO2纤维的比表面积为11.33 m2/g,晶型为锐钛矿型。在相同催化反应条件下纳米TiO2纤维对甲醛气体的催化降解率与商品纳米TiO(2Degussa P25)催化剂相当。纳米TiO2纤维的用量、甲醛气体初始浓度是影响催化效果的两个因素。当甲醛气体初始浓度为0.270 mg/m3,相对湿度为38%,气体流速0.1 L/min,纳米TiO2纤维用量为1.0 g时,甲醛的降解率达到96%。因此,纳米TiO2纤维可用于室内甲醛气体的催化降解。     

玻璃熔窑烟气脱硝技术探讨

结合玻璃熔窑烟气排放的特点,阐述了国内外玻璃熔窑烟气脱硝技术,湿法脱硝、选择性催化还原法(SCR)、选择性非催化还原法(SNCR)及其优缺点。探讨了SCR脱硝技术在玻璃熔窑烟气脱硝的运用,并给出了工程实例,最后提出了一些建议。     

Novel Biocomposites Sheet Molding Compounds for Low Cost Housing Panel Applications

Biocomposites were made by a novel high volume processing technique named biocomposite sheet molding compound panel (BCSMCP) manufacturing process. This process design was inspired by the commercial glass fiber–polyester resin composite fabrication method called sheet molding compounding (SMC). This process yields continuous production of biocomposites on a large scale, and thus can be easily adopted in industries. A unique fiber dispersion method, which enabled uniform distribution of natural fibers, was used in this process. Consistency of the process was tested by evaluating the repeatability of the resultant materials mechanical properties. The low cost biocomposites produced as a result of the processing will be used for various panel applications such as housing and transportation. The molded samples were tested for various mechanical and thermal properties, in accordance with ASTM procedures. The biocomposites were made with various natural fibers including, big blue stem grass, jute, and industrial hemp. By combining different natural fibers in varying mass fractions, hybrid biocomposites were made using this process. Grass fiber reinforced polyester biocomposites processed by the SMC line showed very promising results.     

Processing and Characterization of Short-Fiber Reinforced Jute/Poly Butylene Succinate Biodegradable Composites: The Effect of Weld-Line

Fabrication of complex injection molded parts often involves the use of multiple gates. In such situations, polymer melts from different gates meld to form the molded part (weld line). This paper reports on the fabrication and characterization of the mechanical and morphological properties of short fiber reinforced jute/poly butylene succinate (PBS) biodegradable composites. The effect of a dual gated mold in the fabrication of welded specimens was a key focus of the investigation. It was observed that incorporation of jute fiber (10 wt%) conferred drastic changes on the stress–strain properties of the matrix as the elongation at break (EB), dropped from 160% in the matrix to just 10% in the composite. The tensile strength of the composite was lower than that of the matrix. However, it is noteworthy that the tensile modulus of the composite increased. Bending test also revealed that both bending strength and modulus increased with the incorporation of jute. Morphological studies of the tensile fracture surface using SEM revealed two types of failure mode. Ductile failure was indicated by plastic deformation at the initiation of fracture followed by brittle failure. The good interfacial bonding indicated between jute and PBS was attributed to positive interaction between the two polar polymers. A comparison of the non-weld and weld-line samples revealed that the weld-line composites have better mechanical integrity than the corresponding polymer matrix with weld line. The results also revealed that elongation at break and toughness are most sensitive to the presence of the weld-line whereas flexural properties are least sensitive.     

Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

特警战训服面料开发技术研究

本文介绍了以芳纶纤维为主要材料的我国新一代特警战训服面料的技术研发及达到的主要性能指标。通过试验研究,开发了具有高强防撕裂、永久阻燃、耐高温、防静电、防油拒水、防酸碱等具有集成防护功能的特警战训服系列面料。     

防电磁波辐射的功能性服装

电磁波辐射已成为危害人类健康的第四大污染源，如何进行屏蔽是人们日益关注的问题，本文介绍了防电磁波辐射服装的功能及特点，提出了屏蔽服装今后的发展方向．     

电催化氧化降解大气中甲醛的研究

将有机废气通过高效微孔曝气转移到液相,采用活性碳纤维作为电极,研究不同鼓气速率和不同电压对处理效果的影响.结果表明,本方法适用于低浓度高气量有机废气的处理.在实验范围内,当曝气速率为20L·h-1,外加电压为5V的条件下,处理速率最稳定.