Agricultural Chemicals in the Alluvial Aquifer of a Typical County of the Arkansas Delta

Statistical methods and a Geographic Information System (GIS) were used to investigate potential indicators of ground water vulnerability to agricultural chemical contamination in a representative area of the Mississippi River alluvial aquifer. A total of 47 wells were sampled for analysis of nitrate, phosphorus, potassium, and 13 pesticides commonly-used in the area. Ten soil and hydrogeologic variables and five ground water vulnerability indices were examined to explain the variations of chemical concentrations. The results showed that no individual soil or hydrogeologic variables or their linear combinations could explain more than 25% of the variation of the chemical concentrations. A quadratic response surface model with the values of confining unit thickness, slope, soil permeability, depth to ground water, and recharge rate accounted for 62% of the variation of nitrate, 43% of P, and 83% of K, suggesting that the interactions among soil and hydrogeologic variables were significant. Observed trends of decreasing nitrate and P concentrations with increasing well depth and/or depth to ground water seemed to correlate with carbonate equilibrium in the aquifer and more reduced environment with depth. In view of uncertainties involved, it was recognized that the limitations associated with input data resolution used in GIS and the formulation of leaching indices limited their use for predicting ground water vulnerability. Misuse of pesticides could be another factor that would complicate the relationships between pesticide concentrations and the vulnerability indices.     

强夯引起地面振动的衰减特征

对强夯施工的现场进行了近距离的测量 ,得到了最大地动位移值随距离的变化特征 ,其衰减规律较好地符合负幂函数衰减规律 ,水平径向与垂直向的衰减指数分别为 1 495 3,0 4714。     

超高效液相色谱-质谱法测定地表水中丁基黄原酸

建立了直接测定水中丁基黄原酸的超高效液相色谱-电喷雾串联四极杆质谱法,无需对水样进行富集,水样过滤后就可直接测定。该方法简单、快捷、灵敏度高,方法检出限可达0.2μg/L。     

Numerical Simulations of the Urban Roughness Sub-Layer : A First Attempt

Most of the mesoscale models use roughness parameters to characterise the ground and to compute the surface stress. As the experimental determinations of the urban roughness parameters are rare and not very reliable, a new methodology based on microscale numerical simulations is presented here and the first results from two-dimensional simulations with different roof shapes are analysed.Firstly, it appears that the roof shape has a large influence : large difference in the Reynolds stress profile and in the roughness sub-layer thickness, enhancement of the exchanges at the roof level by buildings with attic. It also appears that the fetch necessary to obtain a constant flux layer is unrealistic compared to the real spatial homogeneity of quarters in European cities. Consequently, a new parameterisation of the urban ground-induced friction is to be developed without reference to the constant flux layer theory.     

APPLICATION OF ENHANCED ANNEALING TO GROUND WATER REMEDIATION DESIGN1

ABSTRACT: A methodology for ground water remediation design has been developed that interfaces ground water simulation models with an enhanced annealing optimizer. The ground water flow and transport simulators provide the ability to consider site‐specific contamination and geohydrologic conditions directly in the assessment of alternative remediation system designs. The optimizer facilitates analysis of tradeoffs between technical, environmental, regulatory, and financial risks for alternative design and operation scenarios. A ground water management model using an optimization method referred to as “enhanced annealing” (simulated annealing enhanced to include “directional search” and “memory” mechanisms) has been developed and successfully applied to an actual restoration problem. The demonstration site is the contaminated unconfined aquifer referred to as N‐Springs located at Han‐ford, Washington. Results of the demonstration show the potential for improving groundwater restoration system performance while reducing overall system cost.     

Virtual Garden Computer Program for use in Exploring the Elements of Biodiversity People Want in Cities

Urban ecology is emerging as an integrative science that explores the interactions of people and biodiversity in cities. Interdisciplinary research requires the creation of new tools that allow the investigation of relations between people and biodiversity. It has been established that access to green spaces or nature benefits city dwellers, but the role of species diversity in providing psychological benefits remains poorly studied. We developed a user‐friendly 3‐dimensional computer program (Virtual Garden [ www.tinyurl.com/3DVirtualGarden ]) that allows people to design their own public or private green spaces with 95 biotic and abiotic features. Virtual Garden allows researchers to explore what elements of biodiversity people would like to have in their nearby green spaces while accounting for other functions that people value in urban green spaces. In 2011, 732 participants used our Virtual Garden program to design their ideal small public garden. On average gardens contained 5 different animals, 8 flowers, and 5 woody plant species. Although the mathematical distribution of flower and woody plant richness (i.e., number of species per garden) appeared to be similar to what would be expected by random selection of features, 30% of participants did not place any animal species in their gardens. Among those who placed animals in their gardens, 94% selected colorful species (e.g., ladybug [Coccinella septempunctata], Great Tit [Parus major], and goldfish), 53% selected herptiles or large mammals, and 67% selected non‐native species. Older participants with a higher level of education and participants with a greater concern for nature designed gardens with relatively higher species richness and more native species. If cities are to be planned for the mutual benefit of people and biodiversity and to provide people meaningful experiences with urban nature, it is important to investigate people's relations with biodiversity further. Virtual Garden offers a standardized tool with which to explore these relations in different environments, cultures, and countries. It can also be used by stakeholders (e.g., city planners) to consider people's opinions of local design. Programa de Computadora de Jardín Virtual para Uso en la Exploración de los Elementos de Biodiversidad que la Gente Desea en las Ciudades     

Sorption and desorption kinetics of diuron,fluometuron, prometryn and pyrithiobac sodium in soils

Abstract

The sorption and desorption characteristics of four herbicides (diuron, fluometuron, prometryn and pyrithiobac‐sodium) in three different cotton growing soils of Australia was investigated. Kinetics and equilibrium sorption and desorption isotherms were determined using the batch equilibrium technique. Sorption was rapid (> 80% in 2 h) and sorption equilibrium was achieved within a short period of time (ca 4 h) for all herbicides. Sorption isotherms of the four herbicides were described by Freundlich equation with an r² value > 0.98. The herbicide sorption as measured by the distribution coefficient (K_d) values ranged from 3.24 to 5.71 L/kg for diuron, 0.44 to 1.13 L/kg for fluometuron, 1.78 to 6.04 L/kg for prometryn and 0.22 to 0.59 L/kg for pyrithiobac‐sodium. Sorption of herbicides was higher in the Moree soil than in Narrabri and Wee Waa soils. When the K_d values were normalised to organic carbon content of the soils (K_oC), it suggested that the affinity of the herbicides to the organic carbon increased in the order: pyrithiobac‐sodium < fluometuron < prometryn < diuron. The desorption isotherms were also adequately described by the Freundlich equation. For desorption, all herbicides exhibited hysteresis and the hysteresis was stronger for highly sorbed herbicides (diuron and prometryn) than the weakly sorbed herbicides (fluometuron and pyrithiobac‐sodium). Hysteresis was also quantified as the percentage of sorbed herbicides which is not released during the desorption step ω = [n_ad / n_de ‐1] x 100). Soil type and initial concentration had significant effect on ω. The effect of sorption and desorption properties of these four herbicides on the off‐site transport to contaminate surface and groundwater are also discussed in this paper.     

LEAD AND CADMIUM ASSOCIATED WITH SALTWATER INTRUSION IN A NEW JERSEY AQUIFER SYSTEM1

ABSTRACT: The U.S. Geological Survey collected ground-water samples from the upper and middle aquifers of the Potomac-Raritan-Magothy aquifer system in a 400-square-mile area of New Jersey from 1984 through 1986. Concentrations of lead were greater than the U.S. Environmental Protection Agency maximum contaminant level (MCL) of 50 micrograms per liter in water from 16 of 239 wells. The cencentrations of cadmium were greater than the MCL of 10 micrograms per liter in water from 10 to 241 wells. One-half of the wells that exceeded the lead MCL were in known areas of saltwater intrusion, as were all 10 wells that exceeded the cadmium MCL. The association of elevated concentrations of these metals with elevated concentrations of chloride indicates a mochanism related to saltwater intrusion.     

ESTIMATING TRANSMISSIVITY AND HYDRAULIC CONDUCTIVITY OF CHICOT AQUIFER FROM SPECIFIC CAPACITY DATA1

ABSTRACT: Specific capacity data obtained from Well Construction reports which are available from USGS offices, can provide useful estimates of tranamissivity (T), and hydraulic conductivity (K), of an aquifer. The Chicot Aquifer in Louisiana is one of the largest sources of fresh ground water in North America. Hydrologic data collected for the Chicot Aquifer indicate that specific capacity tests can be used in estimating local and regional values for T and K, if the Cooper-Jacob equation for transient flow is used with proper corrections for well loss and partial penetration. Where full scale pumping test data are scarce, specific capacity test data that are adequately distributed spatially can be used to map changes in T and K values and can be summarized statistically to indicate applicable regional values. A computer program called “TGUESS” which is available from International Ground Water Modeling Center, Holcomb Research Institute, was used in this study. The contour maps for T and K values are prepared for different well depth intervals to avoid wide variation of values.     

IN SITU MEASUREMENT OF ADSORPTION AND BIOTRANSFORMATION AT A HAZARDOUS WASTE SITE1

ABSTRACT: A three well injection-production test was performed at the United Creosoting Company (UCC) site in Conroe, Texas, to estimate the effective in situ retardation factors for adsorption and to evaluate the significance of biotransformation in limiting the transport of polycydic aromatics present in the shallow aquifer. The field test was also used as a model to determine if this type of testing would be feasible at other hazardous waste sites. During the test, chloride, a non-reactive tracer and two organic compounds, naphthalene and paradichlorobenzene (pDCB), were injected into a center well for 24 hours followed by clean ground water for six days. Ground water was continuously produced from two adjoining wells and monitored to observe the breakthrough of these compounds. Data from the test were analyzed by comparing the statistical moments of the chloride and organics distributions. Retardation factors for naphthalene and pDCB were estimated to be 1.03 and 0.97 by comparison of the statistical moments. A significant loss of naphthalene and pDCB was also observed during the three well test, apparently due to biotransformation. These results suggest that biotransformation is the major process limiting the transport of naphthalene and similar compounds at the UCC site.